* (C) Copyright 2001, 2002
* DENX Software Engineering
* Wolfgang Denk, wd@denx.de
- * All rights reserved.
*
D* Design: wd@denx.de
C* Coding: wd@denx.de
#include <command.h>
#include <malloc.h>
#include <post.h>
+#include <serial.h>
#include <linux/types.h>
#include <linux/string.h> /* for strdup */
+DECLARE_GLOBAL_DATA_PTR;
+
/*------------------------ Local prototypes ---------------------------*/
static long int dram_size (long int, long int *, long int);
static void kbd_init (void);
*/
const uint sdram_table[] =
{
-#if defined(CFG_MEMORY_75) || defined(CFG_MEMORY_8E)
+#if defined(CONFIG_SYS_MEMORY_75) || defined(CONFIG_SYS_MEMORY_8E)
/*
* Single Read. (Offset 0 in UPM RAM)
*/
0x7FFFFC07, /* last */
0xFFFFFCFF, 0xFFFFFCFF, 0xFFFFFCFF,
#endif
-#ifdef CFG_MEMORY_7E
+#ifdef CONFIG_SYS_MEMORY_7E
/*
* Single Read. (Offset 0 in UPM RAM)
*/
***********************************************************************/
int checkboard (void)
{
- puts ("Board: LICCON Konsole LCD2\n");
+ puts ("Board: LICCON Konsole LCD3\n");
return (0);
}
/***********************************************************************
-F* Function: long int initdram (int board_type) P*A*Z*
+F* Function: phys_size_t initdram (int board_type) P*A*Z*
*
P* Parameters: int board_type
P* - Usually type of the board - ignored here.
C* Coding: wd@denx.de
V* Verification: dzu@denx.de
***********************************************************************/
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immr->im_memctl;
long int size_b0;
long int size8, size9;
*/
upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
/* burst length=4, burst type=sequential, CAS latency=2 */
- memctl->memc_mar = CFG_MAR;
+ memctl->memc_mar = CONFIG_SYS_MAR;
/*
* Map controller bank 3 to the SDRAM bank at preliminary address.
*/
- memctl->memc_or3 = CFG_OR3_PRELIM;
- memctl->memc_br3 = CFG_BR3_PRELIM;
+ memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+ memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
/* initialize memory address register */
- memctl->memc_mamr = CFG_MAMR_8COL; /* refresh not enabled yet */
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; /* refresh not enabled yet */
/* mode initialization (offset 5) */
udelay (200); /* 0x80006105 */
*
* try 8 column mode
*/
- size8 = dram_size (CFG_MAMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+ size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
udelay (1000);
/*
* try 9 column mode
*/
- size9 = dram_size (CFG_MAMR_9COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+ size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
if (size8 < size9) { /* leave configuration at 9 columns */
size_b0 = size9;
- memctl->memc_mamr = CFG_MAMR_9COL | MAMR_PTAE;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_9COL | MAMR_PTAE;
udelay (500);
} else { /* back to 8 columns */
size_b0 = size8;
- memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE;
udelay (500);
}
memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) |
OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING;
- memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+ memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
udelay (1000);
return (size_b0);
***********************************************************************/
static long int dram_size (long int mamr_value, long int *base, long int maxsize)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immr->im_memctl;
- volatile long int *addr;
- ulong cnt, val;
- ulong save[32]; /* to make test non-destructive */
- unsigned char i = 0;
memctl->memc_mamr = mamr_value;
- for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
- addr = base + cnt; /* pointer arith! */
-
- save[i++] = *addr;
- *addr = ~cnt;
- }
-
- /* write 0 to base address */
- addr = base;
- save[i] = *addr;
- *addr = 0;
-
- /* check at base address */
- if ((val = *addr) != 0) {
- *addr = save[i];
- return (0);
- }
-
- for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
- addr = base + cnt; /* pointer arith! */
-
- val = *addr;
- *addr = save[--i];
-
- if (val != (~cnt)) {
- return (cnt * sizeof (long));
- }
- }
- return (maxsize);
+ return (get_ram_size(base, maxsize));
}
/* ------------------------------------------------------------------------- */
#endif
/***********************************************************************
-F* Function: int board_pre_init (void) P*A*Z*
+F* Function: int board_early_init_f (void) P*A*Z*
*
P* Parameters: none
P*
P* Returnvalue: int
P* - 0 is always returned.
*
-Z* Intention: This function is the board_pre_init() method implementation
+Z* Intention: This function is the board_early_init_f() method implementation
Z* for the lwmon board.
Z* Disable Ethernet TENA on Port B.
*
C* Coding: wd@denx.de
V* Verification: dzu@denx.de
***********************************************************************/
-int board_pre_init (void)
+int board_early_init_f (void)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
/* Disable Ethernet TENA on Port B
* Necessary because of pull up in COM3 port.
/* maximum number of "magic" key codes that can be assigned */
-static uchar kbd_addr = CFG_I2C_KEYBD_ADDR;
+static uchar kbd_addr = CONFIG_SYS_I2C_KEYBD_ADDR;
static uchar *key_match (uchar *);
***********************************************************************/
int board_postclk_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
kbd_init();
#ifdef CONFIG_MODEM_SUPPORT
return (0);
}
-static void kbd_init (void)
+struct serial_device * default_serial_console (void)
{
- DECLARE_GLOBAL_DATA_PTR;
+ return gd->do_mdm_init ? &serial_scc_device : &serial_smc_device;
+}
+static void kbd_init (void)
+{
uchar kbd_data[KEYBD_DATALEN];
uchar tmp_data[KEYBD_DATALEN];
uchar val, errcd;
int i;
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
gd->kbd_status = 0;
***********************************************************************/
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uchar kbd_data[KEYBD_DATALEN];
- uchar keybd_env[2 * KEYBD_DATALEN + 1];
+ char keybd_env[2 * KEYBD_DATALEN + 1];
uchar kbd_init_status = gd->kbd_status >> 8;
uchar kbd_status = gd->kbd_status;
uchar val;
- uchar *str;
+ char *str;
int i;
if (kbd_init_status) {
}
setenv ("keybd", keybd_env);
- str = strdup (key_match (kbd_data)); /* decode keys */
+ str = strdup ((char *)key_match (kbd_data)); /* decode keys */
#ifdef KEYBD_SET_DEBUGMODE
if (kbd_data[0] == KEYBD_SET_DEBUGMODE) { /* set debug mode */
if ((console_assign (stdout, "lcd") < 0) ||
static int compare_magic (uchar *kbd_data, uchar *str)
{
uchar compare[KEYBD_DATALEN-1];
- uchar *nxt;
+ char *nxt;
int i;
/* Don't include modifier byte */
memcpy (compare, kbd_data+1, KEYBD_DATALEN-1);
- for (; str != NULL; str = (*nxt) ? nxt+1 : nxt) {
+ for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) {
uchar c;
int k;
- c = (uchar) simple_strtoul (str, (char **) (&nxt), 16);
+ c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16);
- if (str == nxt) { /* invalid character */
+ if (str == (uchar *)nxt) { /* invalid character */
break;
}
***********************************************************************/
static uchar *key_match (uchar *kbd_data)
{
- uchar magic[sizeof (kbd_magic_prefix) + 1];
+ char magic[sizeof (kbd_magic_prefix) + 1];
uchar *suffix;
- uchar *kbd_magic_keys;
+ char *kbd_magic_keys;
/*
* The following string defines the characters that can pe appended
/* loop over all magic keys;
* use '\0' suffix in case of empty string
*/
- for (suffix=kbd_magic_keys; *suffix || suffix==kbd_magic_keys; ++suffix) {
+ for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) {
sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
#if 0
printf ("### Check magic \"%s\"\n", magic);
#endif
- if (compare_magic(kbd_data, getenv(magic)) == 0) {
- uchar cmd_name[sizeof (kbd_command_prefix) + 1];
+ if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) {
+ char cmd_name[sizeof (kbd_command_prefix) + 1];
char *cmd;
sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
cmd_name, cmd ? cmd : "<<NULL>>");
#endif
*kbd_data = *suffix;
- return (cmd);
+ return ((uchar *)cmd);
}
}
#if 0
}
#endif /* CONFIG_PREBOOT */
+#ifdef CONFIG_LCD_INFO
+#include <lcd.h>
+#include <version.h>
+#include <timestamp.h>
+
+void lcd_show_board_info(void)
+{
+ char temp[32];
+
+ lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
+ lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n");
+ lcd_printf (" Wolfgang DENK, wd@denx.de\n");
+#ifdef CONFIG_LCD_INFO_BELOW_LOGO
+ lcd_printf ("MPC823 CPU at %s MHz\n",
+ strmhz(temp, gd->cpu_clk));
+ lcd_printf (" %ld MB RAM, %ld MB Flash\n",
+ gd->ram_size >> 20,
+ gd->bd->bi_flashsize >> 20 );
+#else
+ /* leave one blank line */
+ lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n",
+ strmhz(temp, gd->cpu_clk),
+ gd->ram_size >> 20,
+ gd->bd->bi_flashsize >> 20 );
+#endif /* CONFIG_LCD_INFO_BELOW_LOGO */
+}
+#endif /* CONFIG_LCD_INFO */
+
/*---------------Board Special Commands: PIC read/write ---------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if defined(CONFIG_CMD_BSP)
/***********************************************************************
F* Function: int do_pic (cmd_tbl_t *cmdtp, int flag,
F* int argc, char *argv[]) P*A*Z*
default:
break;
}
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
U_BOOT_CMD(
pic, 4, 1, do_pic,
- "pic - read and write PIC registers\n",
+ "read and write PIC registers",
"read reg - read PIC register `reg'\n"
- "pic write reg val - write value `val' to PIC register `reg'\n"
+ "pic write reg val - write value `val' to PIC register `reg'"
);
/***********************************************************************
int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
uchar kbd_data[KEYBD_DATALEN];
- uchar keybd_env[2 * KEYBD_DATALEN + 1];
+ char keybd_env[2 * KEYBD_DATALEN + 1];
uchar val;
int i;
#if 0 /* Done in kbd_init */
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
/* Read keys */
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
- "kbd - read keyboard status\n",
- NULL
+ "read keyboard status",
+ ""
);
/* Read and set LSB switch */
-#define CFG_PC_TXD1_ENA 0x0008 /* PC.12 */
+#define CONFIG_SYS_PC_TXD1_ENA 0x0008 /* PC.12 */
/***********************************************************************
F* Function: int do_lsb (cmd_tbl_t *cmdtp, int flag,
int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
uchar val;
- immap_t *immr = (immap_t *) CFG_IMMR;
+ immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
switch (argc) {
case 1: /* lsb - print setting */
if (strcmp (argv[1], "on") == 0) {
val |= 0x20;
- immr->im_ioport.iop_pcpar &= ~(CFG_PC_TXD1_ENA);
- immr->im_ioport.iop_pcdat |= CFG_PC_TXD1_ENA;
- immr->im_ioport.iop_pcdir |= CFG_PC_TXD1_ENA;
+ immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_TXD1_ENA);
+ immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_TXD1_ENA;
+ immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_TXD1_ENA;
} else if (strcmp (argv[1], "off") == 0) {
val &= ~0x20;
- immr->im_ioport.iop_pcpar &= ~(CFG_PC_TXD1_ENA);
- immr->im_ioport.iop_pcdat &= ~(CFG_PC_TXD1_ENA);
- immr->im_ioport.iop_pcdir |= CFG_PC_TXD1_ENA;
+ immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_TXD1_ENA);
+ immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_TXD1_ENA);
+ immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_TXD1_ENA;
} else {
break;
}
default:
break;
}
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
U_BOOT_CMD(
lsb, 2, 1, do_lsb,
- "lsb - check and set LSB switch\n",
+ "check and set LSB switch",
"on - switch LSB on\n"
"lsb off - switch LSB off\n"
- "lsb - print current setting\n"
+ "lsb - print current setting"
);
-#endif /* CFG_CMD_BSP */
+#endif
/*----------------------------- Utilities -----------------------------*/
/***********************************************************************
***********************************************************************/
uchar pic_read (uchar reg)
{
- return (i2c_reg_read (CFG_I2C_PICIO_ADDR, reg));
+ return (i2c_reg_read (CONFIG_SYS_I2C_PICIO_ADDR, reg));
}
/***********************************************************************
***********************************************************************/
void pic_write (uchar reg, uchar val)
{
- i2c_reg_write (CFG_I2C_PICIO_ADDR, reg, val);
+ i2c_reg_write (CONFIG_SYS_I2C_PICIO_ADDR, reg, val);
}
/*---------------------- Board Control Functions ----------------------*/
void board_poweroff (void)
{
/* Turn battery off */
- ((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat &= ~(1 << (31 - 13));
+ ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~(1 << (31 - 13));
while (1);
}
i2c_write (kbd_addr, 0, 0, &val, 1);
i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
- return (compare_magic(kbd_data, CONFIG_MODEM_KEY_MAGIC) == 0);
+ return (compare_magic(kbd_data, (uchar *)CONFIG_MODEM_KEY_MAGIC) == 0);
}
#endif /* CONFIG_MODEM_SUPPORT */
i2c_write (kbd_addr, 0, 0, &val, 1);
i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
- return (compare_magic(kbd_data, CONFIG_POST_KEY_MAGIC) == 0);
+ return (compare_magic(kbd_data, (uchar *)CONFIG_POST_KEY_MAGIC) == 0);
}
#endif