Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging

[oweals/u-boot.git] / board / gateworks / gw_ventana / gw_ventana.c

diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 22f3b3860b4718c4dfc60560e8010dbd327d77ca..3b7c82b1dc125fe9c88f7f3921724562a7b1e9bd 100644 (file)
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -157,20 +157,18 @@ static iomux_v3_cfg_t const usb_pads[] = {
 
 int board_ehci_hcd_init(int port)
 {
-       struct ventana_board_info *info = &ventana_info;
        int gpio;
 
        SETUP_IOMUX_PADS(usb_pads);
 
-       /* Reset USB HUB (present on GW54xx/GW53xx) */
-       switch (info->model[3]) {
-       case '3': /* GW53xx */
-       case '5': /* GW552x */
-               SETUP_IOMUX_PAD(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG);
+       /* Reset USB HUB */
+       switch (board_type) {
+       case GW53xx:
+       case GW552x:
                gpio = (IMX_GPIO_NR(1, 9));
                break;
-       case '4': /* GW54xx */
-               SETUP_IOMUX_PAD(PAD_SD1_DAT0__GPIO1_IO16 | DIO_PAD_CFG);
+       case GW54proto:
+       case GW54xx:
                gpio = (IMX_GPIO_NR(1, 16));
                break;
        default:
@@ -687,8 +685,7 @@ int misc_init_r(void)
                memset(str, 0, sizeof(str));
                for (i = 0; i < (sizeof(str)-1) && info->model[i]; i++)
                        str[i] = tolower(info->model[i]);
-               if (!getenv("model"))
-                       setenv("model", str);
+               setenv("model", str);
                if (!getenv("fdt_file")) {
                        sprintf(fdt, "%s-%s.dtb", cputype, str);
                        setenv("fdt_file", fdt);
@@ -698,18 +695,14 @@ int misc_init_r(void)
                        *p++ = 0;
 
                        setenv("model_base", str);
-                       if (!getenv("fdt_file1")) {
-                               sprintf(fdt, "%s-%s.dtb", cputype, str);
-                               setenv("fdt_file1", fdt);
-                       }
+                       sprintf(fdt, "%s-%s.dtb", cputype, str);
+                       setenv("fdt_file1", fdt);
                        if (board_type != GW551x && board_type != GW552x)
                                str[4] = 'x';
                        str[5] = 'x';
                        str[6] = 0;
-                       if (!getenv("fdt_file2")) {
-                               sprintf(fdt, "%s-%s.dtb", cputype, str);
-                               setenv("fdt_file2", fdt);
-                       }
+                       sprintf(fdt, "%s-%s.dtb", cputype, str);
+                       setenv("fdt_file2", fdt);
                }
 
                /* initialize env from EEPROM */
@@ -818,9 +811,11 @@ int ft_board_setup(void *blob, bd_t *bd)
                return 0;
        }
 
-       /* Update partition nodes using info from mtdparts env var */
-       puts("   Updating MTD partitions...\n");
-       fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+       if (test_bit(EECONFIG_NAND, info->config)) {
+               /* Update partition nodes using info from mtdparts env var */
+               puts("   Updating MTD partitions...\n");
+               fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+       }
 
        /* Update display timings from display env var */
        if (display) {
@@ -829,10 +824,6 @@ int ft_board_setup(void *blob, bd_t *bd)
                        printf("   Set display timings for %s...\n", display);
        }
 
-       if (!model) {
-               puts("invalid board info: Leaving FDT fully enabled\n");
-               return 0;
-       }
        printf("   Adjusting FDT per EEPROM for %s...\n", model);
 
        /* board serial number */