*/
#include <common.h>
-#include <asm/io.h>
+#include <command.h>
+#include <env.h>
+#include <env_internal.h>
+#include <flash.h>
+#include <init.h>
+#include <led.h>
+#include <malloc.h>
+#include <net.h>
+#include <spi.h>
+#include <spi_flash.h>
+#include <u-boot/crc.h>
+#include <uuid.h>
+#include <linux/ctype.h>
+#include <linux/io.h>
+
+#define MT76XX_AGPIO_CFG 0x1000003c
+
+#define FACTORY_DATA_OFFS 0xc0000
+#define FACTORY_DATA_SECT_SIZE 0x10000
+#if ((CONFIG_ENV_OFFSET_REDUND + CONFIG_ENV_SIZE) > FACTORY_DATA_OFFS)
+#error "U-Boot image with environment too big (overlapping with factory-data)!"
+#endif
+#define FACTORY_DATA_USER_OFFS 0x140
+#define FACTORY_DATA_SIZE 0x1f0
+#define FACTORY_DATA_CRC_LEN (FACTORY_DATA_SIZE - \
+ FACTORY_DATA_USER_OFFS - sizeof(u32))
+
+#define FACTORY_DATA_MAGIC 0xCAFEBABE
+
+struct factory_data_values {
+ u8 pad_1[4];
+ u8 wifi_mac[6]; /* offs: 0x004: binary value */
+ u8 pad_2[30];
+ u8 eth_mac[6]; /* offs: 0x028: binary value */
+ u8 pad_3[FACTORY_DATA_USER_OFFS - 4 - 6 - 30 - 6];
+ /* User values start here at offset 0x140 */
+ u32 crc;
+ u32 magic;
+ u32 version;
+ char ipr_id[UUID_STR_LEN]; /* UUID as string w/o ending \0 */
+ char hqv_id[UUID_STR_LEN]; /* UUID as string w/o ending \0 */
+ char unielec_id[UUID_STR_LEN]; /* UUID as string w/o ending \0 */
+};
int board_early_init_f(void)
{
+ void __iomem *gpio_mode;
+
+ /* Configure digital vs analog GPIOs */
+ gpio_mode = ioremap_nocache(MT76XX_AGPIO_CFG, 0x100);
+ iowrite32(0x00fe01ff, gpio_mode);
+
+ return 0;
+}
+
+static bool prepare_uuid_var(const char *fd_ptr, const char *env_var_name,
+ char errorchar)
+{
+ char str[UUID_STR_LEN + 1] = { 0 }; /* Enough for UUID stuff */
+ bool env_updated = false;
+ char *env;
+ int i;
+
+ memcpy(str, fd_ptr, UUID_STR_LEN);
+
+ /* Convert non-ascii character to 'X' */
+ for (i = 0; i < UUID_STR_LEN; i++) {
+ if (!(isascii(str[i]) && isprint(str[i])))
+ str[i] = errorchar;
+ }
+
+ env = env_get(env_var_name);
+ if (strcmp(env, str)) {
+ env_set(env_var_name, str);
+ env_updated = true;
+ }
+
+ return env_updated;
+}
+
+static void factory_data_env_config(void)
+{
+ struct factory_data_values *fd;
+ struct spi_flash *sf;
+ int env_updated = 0;
+ char str[UUID_STR_LEN + 1]; /* Enough for UUID stuff */
+ char *env;
+ u8 *buf;
+ u32 crc;
+ int ret;
+ u8 *ptr;
+
+ buf = malloc(FACTORY_DATA_SIZE);
+ if (!buf) {
+ printf("F-Data:Unable to allocate buffer\n");
+ return;
+ }
+
/*
- * Nothing to be done here for this board (no UART setup etc)
- * right now. We might need some pin muxing, so lets keep this
- * function for now.
+ * Get values from factory-data area in SPI NOR
*/
+ sf = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
+ CONFIG_SF_DEFAULT_CS,
+ CONFIG_SF_DEFAULT_SPEED,
+ CONFIG_SF_DEFAULT_MODE);
+ if (!sf) {
+ printf("F-Data:Unable to access SPI NOR flash\n");
+ goto err_free;
+ }
+
+ ret = spi_flash_read(sf, FACTORY_DATA_OFFS, FACTORY_DATA_SIZE,
+ (void *)buf);
+ if (ret) {
+ printf("F-Data:Unable to read factory-data from SPI NOR\n");
+ goto err_spi_flash;
+ }
+
+ fd = (struct factory_data_values *)buf;
+
+ if (fd->magic != FACTORY_DATA_MAGIC)
+ printf("F-Data:Magic value not correct\n");
+
+ crc = crc32(0, (u8 *)&fd->magic, FACTORY_DATA_CRC_LEN);
+ if (crc != fd->crc)
+ printf("F-Data:CRC not correct\n");
+ else
+ printf("F-Data:factory-data version %x detected\n",
+ fd->version);
+
+ /* Handle wifi_mac env variable */
+ ptr = fd->wifi_mac;
+ sprintf(str, "%pM", ptr);
+ if (!is_valid_ethaddr(ptr))
+ printf("F-Data:Invalid MAC addr: wifi_mac %s\n", str);
+
+ env = env_get("wifiaddr");
+ if (strcmp(env, str)) {
+ env_set("wifiaddr", str);
+ env_updated = 1;
+ }
+
+ /* Handle eth_mac env variable */
+ ptr = fd->eth_mac;
+ sprintf(str, "%pM", ptr);
+ if (!is_valid_ethaddr(ptr))
+ printf("F-Data:Invalid MAC addr: eth_mac %s\n", str);
+
+ env = env_get("ethaddr");
+ if (strcmp(env, str)) {
+ env_set("ethaddr", str);
+ env_updated = 1;
+ }
+
+ /* Handle UUID env variables */
+ env_updated |= prepare_uuid_var(fd->ipr_id, "linuxmoduleid", 'X');
+ env_updated |= prepare_uuid_var(fd->hqv_id, "linuxmodulehqvid", '\0');
+ env_updated |= prepare_uuid_var(fd->unielec_id,
+ "linuxmoduleunielecid", '\0');
+
+ /* Check if the environment was updated and needs to get stored */
+ if (env_updated != 0) {
+ printf("F-Data:Values don't match env values -> saving\n");
+ env_save();
+ } else {
+ debug("F-Data:Values match current env values\n");
+ }
+
+err_spi_flash:
+ spi_flash_free(sf);
+
+err_free:
+ free(buf);
+}
+
+int board_late_init(void)
+{
+ if (IS_ENABLED(CONFIG_LED))
+ led_default_state();
+
+ factory_data_env_config();
+
return 0;
}
+
+static void copy_or_generate_uuid(char *fd_ptr, const char *env_var_name)
+{
+ char str[UUID_STR_LEN + 1] = { 0 }; /* Enough for UUID stuff */
+ char *env;
+
+ /* Don't use the UUID dest place, as the \0 char won't fit */
+ env = env_get(env_var_name);
+ if (env)
+ strncpy(str, env, UUID_STR_LEN);
+ else
+ gen_rand_uuid_str(str, UUID_STR_FORMAT_STD);
+
+ memcpy(fd_ptr, str, UUID_STR_LEN);
+}
+
+/*
+ * Helper function to provide some sane factory-data values for testing
+ * purpose, when these values are not programmed correctly
+ */
+int do_fd_write(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+ struct factory_data_values *fd;
+ struct spi_flash *sf;
+ u8 *buf;
+ int ret = CMD_RET_FAILURE;
+
+ buf = malloc(FACTORY_DATA_SECT_SIZE);
+ if (!buf) {
+ printf("F-Data:Unable to allocate buffer\n");
+ return CMD_RET_FAILURE;
+ }
+
+ sf = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
+ CONFIG_SF_DEFAULT_CS,
+ CONFIG_SF_DEFAULT_SPEED,
+ CONFIG_SF_DEFAULT_MODE);
+ if (!sf) {
+ printf("F-Data:Unable to access SPI NOR flash\n");
+ goto err_free;
+ }
+
+ /* Generate the factory-data struct */
+
+ /* Fist read complete sector into buffer */
+ ret = spi_flash_read(sf, FACTORY_DATA_OFFS, FACTORY_DATA_SECT_SIZE,
+ (void *)buf);
+ if (ret) {
+ printf("F-Data:spi_flash_read failed (%d)\n", ret);
+ goto err_spi_flash;
+ }
+
+ fd = (struct factory_data_values *)buf;
+ fd->magic = FACTORY_DATA_MAGIC;
+ fd->version = 0x1;
+
+ /* Use existing MAC and UUID values or generate some random ones */
+ if (!eth_env_get_enetaddr("wifiaddr", fd->wifi_mac)) {
+ net_random_ethaddr(fd->wifi_mac);
+ /* to get a different seed value for the MAC address */
+ mdelay(10);
+ }
+
+ if (!eth_env_get_enetaddr("ethaddr", fd->eth_mac))
+ net_random_ethaddr(fd->eth_mac);
+
+ copy_or_generate_uuid(fd->ipr_id, "linuxmoduleid");
+ copy_or_generate_uuid(fd->hqv_id, "linuxmodulehqvid");
+ copy_or_generate_uuid(fd->unielec_id, "linuxmoduleunielecid");
+
+ printf("New factory-data values:\n");
+ printf("wifiaddr=%pM\n", fd->wifi_mac);
+ printf("ethaddr=%pM\n", fd->eth_mac);
+
+ /*
+ * We don't have the \0 char at the end, so we need to specify the
+ * length in the printf format instead
+ */
+ printf("linuxmoduleid=%." __stringify(UUID_STR_LEN) "s\n", fd->ipr_id);
+ printf("linuxmodulehqvid=%." __stringify(UUID_STR_LEN) "s\n",
+ fd->hqv_id);
+ printf("linuxmoduleunielecid=%." __stringify(UUID_STR_LEN) "s\n",
+ fd->unielec_id);
+
+ fd->crc = crc32(0, (u8 *)&fd->magic, FACTORY_DATA_CRC_LEN);
+
+ ret = spi_flash_erase(sf, FACTORY_DATA_OFFS, FACTORY_DATA_SECT_SIZE);
+ if (ret) {
+ printf("F-Data:spi_flash_erase failed (%d)\n", ret);
+ goto err_spi_flash;
+ }
+
+ ret = spi_flash_write(sf, FACTORY_DATA_OFFS, FACTORY_DATA_SECT_SIZE,
+ buf);
+ if (ret) {
+ printf("F-Data:spi_flash_write failed (%d)\n", ret);
+ goto err_spi_flash;
+ }
+
+ printf("F-Data:factory-data values written to SPI NOR flash\n");
+
+err_spi_flash:
+ spi_flash_free(sf);
+
+err_free:
+ free(buf);
+
+ return ret;
+}
+
+#ifndef CONFIG_SPL_BUILD
+U_BOOT_CMD(
+ fd_write, 1, 0, do_fd_write,
+ "Write test factory-data values to SPI NOR",
+ "\n"
+);
+#endif
projects / oweals / u-boot.git / blobdiff