avr32: delete non generic board favr-32-ezkit

[oweals/u-boot.git] / board / freescale / t102xrdb / t102xrdb.c

diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c
index e196f12ac7a16844a3633a9691b40b24dc79eb0a..f971976d73b3996a462dc9e9a89b5d265410aff2 100644 (file)
--- a/board/freescale/t102xrdb/t102xrdb.c
+++ b/board/freescale/t102xrdb/t102xrdb.c
@@ -18,11 +18,25 @@
 #include <asm/fsl_liodn.h>
 #include <fm_eth.h>
 #include "t102xrdb.h"
+#ifdef CONFIG_T1024RDB
 #include "cpld.h"
+#endif
 #include "../common/sleep.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_T1023RDB
+enum {
+       GPIO1_SD_SEL    = 0x00020000, /* GPIO1_14, 0: EMMC, 1:SD/MMC */
+       GPIO1_EMMC_SEL,
+       GPIO1_VBANK0,
+       GPIO1_VBANK4    = 0x00008000, /* GPIO1_16/20/22,  100:vBank4 */
+       GPIO1_VBANK_MASK = 0x00008a00,
+       GPIO1_DIR_OUTPUT = 0x00028a00,
+       GPIO1_GET_VAL,
+};
+#endif
+
 int checkboard(void)
 {
        struct cpu_type *cpu = gd->arch.cpu;
@@ -34,14 +48,17 @@ int checkboard(void)
        srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
 
        printf("Board: %sRDB, ", cpu->name);
-       printf("Board rev: 0x%02x CPLD ver: 0x%02x, boot from ",
+#ifdef CONFIG_T1024RDB
+       printf("Board rev: 0x%02x CPLD ver: 0x%02x, ",
               CPLD_READ(hw_ver), CPLD_READ(sw_ver));
+#endif
+       printf("boot from ");
 
 #ifdef CONFIG_SDCARD
        puts("SD/MMC\n");
 #elif CONFIG_SPIFLASH
        puts("SPI\n");
-#else
+#elif defined(CONFIG_T1024RDB)
        u8 reg;
 
        reg = CPLD_READ(flash_csr);
@@ -52,17 +69,25 @@ int checkboard(void)
                reg = ((reg & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT);
                printf("NOR vBank%d\n", reg);
        }
+#elif defined(CONFIG_T1023RDB)
+#ifdef CONFIG_NAND
+       puts("NAND\n");
+#else
+       printf("NOR vBank%d\n", (t1023rdb_gpio_ctrl(GPIO1_GET_VAL) &
+              GPIO1_VBANK4) >> 15 ? 4 : 0);
+#endif
 #endif
 
        puts("SERDES Reference Clocks:\n");
        if (srds_s1 == 0x95)
                printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]);
        else
-               printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[0], freq[0]);
+               printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[0], freq[1]);
 
        return 0;
 }
 
+#ifdef CONFIG_T1024RDB
 static void board_mux_lane(void)
 {
        ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -82,6 +107,7 @@ static void board_mux_lane(void)
        }
        CPLD_WRITE(boot_override, CPLD_OVERRIDE_MUX_EN);
 }
+#endif
 
 int board_early_init_f(void)
 {
@@ -124,7 +150,9 @@ int board_early_init_r(void)
 #ifdef CONFIG_SYS_DPAA_QBMAN
        setup_portals();
 #endif
+#ifdef CONFIG_T1024RDB
        board_mux_lane();
+#endif
 
        return 0;
 }
@@ -170,3 +198,62 @@ int ft_board_setup(void *blob, bd_t *bd)
 
        return 0;
 }
+
+
+#ifdef CONFIG_T1023RDB
+static u32 t1023rdb_gpio_ctrl(u32 ctrl_type)
+{
+       ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+       u32 gpioval;
+
+       setbits_be32(&pgpio->gpdir, GPIO1_DIR_OUTPUT);
+       gpioval = in_be32(&pgpio->gpdat);
+
+       switch (ctrl_type) {
+       case GPIO1_SD_SEL:
+               gpioval |= GPIO1_SD_SEL;
+               break;
+       case GPIO1_EMMC_SEL:
+               gpioval &= ~GPIO1_SD_SEL;
+               break;
+       case GPIO1_VBANK0:
+               gpioval &= ~GPIO1_VBANK_MASK;
+               break;
+       case GPIO1_VBANK4:
+               gpioval &= ~GPIO1_VBANK_MASK;
+               gpioval |= GPIO1_VBANK4;
+               break;
+       case GPIO1_GET_VAL:
+               return gpioval;
+       default:
+               break;
+       }
+       out_be32(&pgpio->gpdat, gpioval);
+
+       return 0;
+}
+
+static int gpio_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
+                   char * const argv[])
+{
+       if (argc < 2)
+               return CMD_RET_USAGE;
+       if (!strcmp(argv[1], "vbank0"))
+               t1023rdb_gpio_ctrl(GPIO1_VBANK0);
+       else if (!strcmp(argv[1], "vbank4"))
+               t1023rdb_gpio_ctrl(GPIO1_VBANK4);
+       else if (!strcmp(argv[1], "sd"))
+               t1023rdb_gpio_ctrl(GPIO1_SD_SEL);
+       else if (!strcmp(argv[1], "EMMC"))
+               t1023rdb_gpio_ctrl(GPIO1_EMMC_SEL);
+       else
+               return CMD_RET_USAGE;
+       return 0;
+}
+
+U_BOOT_CMD(
+       gpio, 2, 0, gpio_cmd,
+       "for vbank0/vbank4/SD/eMMC switch control in runtime",
+       "command (e.g. gpio vbank4)"
+);
+#endif