/*
- * Copyright 2010 Freescale Semiconductor, Inc.
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
* Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
* Timur Tabi <timur@freescale.com>
*
#include <asm/io.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <fsl_mdio.h>
#include <tsec.h>
#include <asm/fsl_law.h>
-#include <asm/mp.h>
#include <netdev.h>
#include <i2c.h>
#include <hwconfig.h>
/* Set the pin muxing to enable ETSEC2. */
clrbits_be32(&gur->pmuxcr2, 0x001F8000);
+ /* Enable the SPI */
+ clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI);
+
return 0;
}
{
u8 sw;
- puts("Board: P1022DS ");
-
- printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+ printf("Board: P1022DS Sys ID: 0x%02x, "
+ "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
/* Choose the 11.2896Mhz codec reference clock */
#define CONFIG_PIXIS_BRDCFG1_AUDCLK_11 0x01
+/* Connect to USB2 */
+#define CONFIG_PIXIS_BRDCFG0_USB2 0x10
+/* Connect to TFM bus */
+#define CONFIG_PIXIS_BRDCFG1_TDM 0x0c
+/* Connect to SPI */
+#define CONFIG_PIXIS_BRDCFG0_SPI 0x80
+
int misc_init_r(void)
{
u8 temp;
const char *audclk;
size_t arglen;
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
/* For DVI, enable the TFP410 Encoder. */
return -1;
debug("DVI Encoder Read: 0x%02x\n",temp);
+ /* Enable the USB2 in PMUXCR2 and FGPA */
+ if (hwconfig("usb2")) {
+ clrsetbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_ETSECUSB_MASK,
+ MPC85xx_PMUXCR2_USB);
+ setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_USB2);
+ }
+
+ /* tdm and audio can not enable simultaneous*/
+ if (hwconfig("tdm") && hwconfig("audclk")){
+ printf("WARNING: TDM and AUDIO can not be enabled simultaneous !\n");
+ return -1;
+ }
+
+ /* Enable the TDM in PMUXCR and FGPA */
+ if (hwconfig("tdm")) {
+ clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TDM_MASK,
+ MPC85xx_PMUXCR_TDM);
+ setbits_8(&pixis->brdcfg1, CONFIG_PIXIS_BRDCFG1_TDM);
+ /* TDM need some configration option by SPI */
+ clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SPI_MASK,
+ MPC85xx_PMUXCR_SPI);
+ setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_SPI);
+ }
+
/*
* Enable the reference clock for the WM8776 codec, and route the MUX
* pins for SSI. The default is the 12.288 MHz clock
*/
- temp = in_8(&pixis->brdcfg1) & ~(CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK |
- CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK);
- temp |= CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI;
-
- audclk = hwconfig_arg("audclk", &arglen);
- /* Check the first two chars only */
- if (audclk && (strncmp(audclk, "11", 2) == 0))
- temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_11;
- else
- temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_12;
- out_8(&pixis->brdcfg1, temp);
+ if (hwconfig("audclk")) {
+ temp = in_8(&pixis->brdcfg1) & ~(CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK |
+ CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK);
+ temp |= CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI;
+
+ audclk = hwconfig_arg("audclk", &arglen);
+ /* Check the first two chars only */
+ if (audclk && (strncmp(audclk, "11", 2) == 0))
+ temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_11;
+ else
+ temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_12;
+ setbits_8(&pixis->brdcfg1, temp);
+ }
return 0;
}
*/
int board_eth_init(bd_t *bis)
{
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[2];
unsigned int num = 0;
num++;
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
}
* ft_codec_setup - fix up the clock-frequency property of the codec node
*
* Update the clock-frequency property based on the value of the 'audclk'
- * hwconfig option. If audclk is not specified, then default to 12.288MHz.
+ * hwconfig option. If audclk is not specified, then don't write anything
+ * to the device tree, because it means that the codec clock is disabled.
*/
static void ft_codec_setup(void *blob, const char *compatible)
{
u32 freq;
audclk = hwconfig_arg("audclk", &arglen);
- if (audclk && (strncmp(audclk, "11", 2) == 0))
- freq = 11289600;
- else
- freq = 12288000;
-
- do_fixup_by_compat_u32(blob, compatible, "clock-frequency", freq, 1);
+ if (audclk) {
+ if (strncmp(audclk, "11", 2) == 0)
+ freq = 11289600;
+ else
+ freq = 12288000;
+
+ do_fixup_by_compat_u32(blob, compatible, "clock-frequency",
+ freq, 1);
+ }
}
void ft_board_setup(void *blob, bd_t *bd)
ft_codec_setup(blob, "wlf,wm8776");
}
#endif
-
-#ifdef CONFIG_MP
-void board_lmb_reserve(struct lmb *lmb)
-{
- cpu_mp_lmb_reserve(lmb);
-}
-#endif