dm: ppc: p1010: add i2c DM support

[oweals/u-boot.git] / board / freescale / p1010rdb / p1010rdb.c

diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index a0866926832f7f891e55ee8f2c339ddebc514a06..65ac47263ec7a77adeea4f308aaf271ec9fbecaa 100644 (file)
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright 2020 NXP
  */
 
 #include <common.h>
@@ -136,6 +137,125 @@ int config_board_mux(int ctrl_type)
        ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
        u8 tmp;
 
+#ifdef CONFIG_DM_I2C
+       struct udevice *dev;
+       int ret;
+#if defined(CONFIG_TARGET_P1010RDB_PA)
+       struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
+       ret = i2c_get_chip_for_busnum(I2C_PCA9557_BUS_NUM,
+                                     I2C_PCA9557_ADDR1, 1, &dev);
+       if (ret) {
+               printf("%s: Cannot find udev for a bus %d\n",
+                      __func__, I2C_PCA9557_BUS_NUM);
+               return ret;
+       }
+       switch (ctrl_type) {
+       case MUX_TYPE_IFC:
+               tmp = 0xf0;
+               dm_i2c_write(dev, 3, &tmp, 1);
+               tmp = 0x01;
+               dm_i2c_write(dev, 1, &tmp, 1);
+               sd_ifc_mux = MUX_TYPE_IFC;
+               clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
+               break;
+       case MUX_TYPE_SDHC:
+               tmp = 0xf0;
+               dm_i2c_write(dev, 3, &tmp, 1);
+               tmp = 0x05;
+               dm_i2c_write(dev, 1, &tmp, 1);
+               sd_ifc_mux = MUX_TYPE_SDHC;
+               clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
+                               PMUXCR1_SDHC_ENABLE);
+               break;
+       case MUX_TYPE_SPIFLASH:
+               out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH);
+               break;
+       case MUX_TYPE_TDM:
+               out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
+               out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
+               break;
+       case MUX_TYPE_CAN:
+               out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
+               break;
+       default:
+               break;
+       }
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
+       ret = i2c_get_chip_for_busnum(I2C_PCA9557_BUS_NUM,
+                                     I2C_PCA9557_ADDR2, 1, &dev);
+       if (ret) {
+               printf("%s: Cannot find udev for a bus %d\n",
+                      __func__, I2C_PCA9557_BUS_NUM);
+               return ret;
+       }
+       switch (ctrl_type) {
+       case MUX_TYPE_IFC:
+               dm_i2c_read(dev, 0, &tmp, 1);
+               clrbits_8(&tmp, 0x04);
+               dm_i2c_write(dev, 1, &tmp, 1);
+               dm_i2c_read(dev, 3, &tmp, 1);
+               clrbits_8(&tmp, 0x04);
+               dm_i2c_write(dev, 3, &tmp, 1);
+               sd_ifc_mux = MUX_TYPE_IFC;
+               clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
+               break;
+       case MUX_TYPE_SDHC:
+               dm_i2c_read(dev, 0, &tmp, 1);
+               setbits_8(&tmp, 0x04);
+               dm_i2c_write(dev, 1, &tmp, 1);
+               dm_i2c_read(dev, 3, &tmp, 1);
+               clrbits_8(&tmp, 0x04);
+               dm_i2c_write(dev, 3, &tmp, 1);
+               sd_ifc_mux = MUX_TYPE_SDHC;
+               clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
+                               PMUXCR1_SDHC_ENABLE);
+               break;
+       case MUX_TYPE_SPIFLASH:
+               dm_i2c_read(dev, 0, &tmp, 1);
+               clrbits_8(&tmp, 0x80);
+               dm_i2c_write(dev, 1, &tmp, 1);
+               dm_i2c_read(dev, 3, &tmp, 1);
+               clrbits_8(&tmp, 0x80);
+               dm_i2c_write(dev, 3, &tmp, 1);
+               break;
+       case MUX_TYPE_TDM:
+               dm_i2c_read(dev, 0, &tmp, 1);
+               setbits_8(&tmp, 0x82);
+               dm_i2c_write(dev, 1, &tmp, 1);
+               dm_i2c_read(dev, 3, &tmp, 1);
+               clrbits_8(&tmp, 0x82);
+               dm_i2c_write(dev, 3, &tmp, 1);
+               break;
+       case MUX_TYPE_CAN:
+               dm_i2c_read(dev, 0, &tmp, 1);
+               clrbits_8(&tmp, 0x02);
+               dm_i2c_write(dev, 1, &tmp, 1);
+               dm_i2c_read(dev, 3, &tmp, 1);
+               clrbits_8(&tmp, 0x02);
+               dm_i2c_write(dev, 3, &tmp, 1);
+               break;
+       case MUX_TYPE_CS0_NOR:
+               dm_i2c_read(dev, 0, &tmp, 1);
+               clrbits_8(&tmp, 0x08);
+               dm_i2c_write(dev, 1, &tmp, 1);
+               dm_i2c_read(dev, 3, &tmp, 1);
+               clrbits_8(&tmp, 0x08);
+               dm_i2c_write(dev, 3, &tmp, 1);
+               break;
+       case MUX_TYPE_CS0_NAND:
+               dm_i2c_read(dev, 0, &tmp, 1);
+               setbits_8(&tmp, 0x08);
+               dm_i2c_write(dev, 1, &tmp, 1);
+               dm_i2c_read(dev, 3, &tmp, 1);
+               clrbits_8(&tmp, 0x08);
+               dm_i2c_write(dev, 3, &tmp, 1);
+               break;
+       default:
+               break;
+       }
+#endif
+#else
 #if defined(CONFIG_TARGET_P1010RDB_PA)
        struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
 
@@ -242,6 +362,7 @@ int config_board_mux(int ctrl_type)
                break;
        }
        i2c_set_bus_num(orig_bus);
+#endif
 #endif
        return 0;
 }
@@ -250,9 +371,23 @@ int config_board_mux(int ctrl_type)
 int i2c_pca9557_read(int type)
 {
        u8 val;
+       int bus_num = I2C_PCA9557_BUS_NUM;
 
-       i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+#ifdef CONFIG_DM_I2C
+       struct udevice *dev;
+       int ret;
+
+       ret = i2c_get_chip_for_busnum(bus_num, I2C_PCA9557_ADDR2, 1, &dev);
+       if (ret) {
+               printf("%s: Cannot find udev for a bus %d\n",
+                      __func__, bus_num);
+               return ret;
+       }
+       dm_i2c_read(dev, 0, &val, 1);
+#else
+       i2c_set_bus_num(bus_num);
        i2c_read(I2C_PCA9557_ADDR2, 0, 1, &val, 1);
+#endif
 
        switch (type) {
        case I2C_READ_BANK:
@@ -280,11 +415,26 @@ int checkboard(void)
        printf("Board: %sRDB-PA, ", cpu->name);
 #elif defined(CONFIG_TARGET_P1010RDB_PB)
        printf("Board: %sRDB-PB, ", cpu->name);
+#ifdef CONFIG_DM_I2C
+       struct udevice *dev;
+       int ret;
+
+       ret = i2c_get_chip_for_busnum(I2C_PCA9557_BUS_NUM, I2C_PCA9557_ADDR2,
+                                     1, &dev);
+       if (ret) {
+               printf("%s: Cannot find udev for a bus %d\n", __func__,
+                      I2C_PCA9557_BUS_NUM);
+               return ret;
+       }
+       val = 0x0;  /* no polarity inversion */
+       dm_i2c_write(dev, 2, &val, 1);
+#else
        i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
        i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE);
        val = 0x0;  /* no polarity inversion */
        i2c_write(I2C_PCA9557_ADDR2, 2, 1, &val, 1);
 #endif
+#endif
 
 #ifdef CONFIG_SDCARD
        /* switch to IFC to read info from CPLD */
@@ -308,7 +458,11 @@ int checkboard(void)
        case 0xe:
                puts("SDHC\n");
                val = 0x60; /* set pca9557 pin input/output */
+#ifdef CONFIG_DM_I2C
+               dm_i2c_write(dev, 3, &val, 1);
+#else
                i2c_write(I2C_PCA9557_ADDR2, 3, 1, &val, 1);
+#endif
                break;
        case 0x5:
                config_board_mux(MUX_TYPE_IFC);