3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on.
-
Build and burn u-boot to SPI flash
==================================
1. Build u-boot-spi.bin image
3. Check SW4[1:4]= 0110 and SW6[4]=0, then power on.
-
CPLD POR setting registers
==========================
1. Set POR switch selection register (addr 0xFFB00011) to 0.
=> reset
-
Boot Linux from network using TFTP on P1010RDB
==============================================
Place uImage, p1010rdb.dtb and rootfs files in the TFTP disk area.
Please contact your local field applications engineer or sales representative
to obtain related documents, such as P1010-RDB User Guide for details.
-