powerpc/p2041rdb: Add ethernet support on P2041RDB board

[oweals/u-boot.git] / board / freescale / mx35pdk / mx35pdk.c

diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index da926e5781ec095cb1d43507f5ce33d67ce1cdd3..9eefe5ee16882749e5308b38203cf126932c4902 100644 (file)
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -34,7 +34,7 @@
 #include <mc9sdz60.h>
 #include <mc13892.h>
 #include <linux/types.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
 #include <asm/arch/sys_proto.h>
 #include <netdev.h>
 
@@ -52,12 +52,25 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init(void)
 {
-       gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
-               PHYS_SDRAM_1_SIZE);
+       u32 size1, size2;
+
+       size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+       size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
+
+       gd->ram_size = size1 + size2;
 
        return 0;
 }
 
+void dram_init_banksize(void)
+{
+       gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+       gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+       gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+       gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+}
+
 static void setup_iomux_i2c(void)
 {
        int pad;
@@ -227,8 +240,7 @@ int board_late_init(void)
                mxc_request_iomux(MX35_PIN_COMPARE, MUX_CONFIG_GPIO);
                mxc_iomux_set_input(MUX_IN_GPIO1_IN_5, INPUT_CTL_PATH0);
 
-               mxc_gpio_direction(37, MXC_GPIO_DIRECTION_OUT);
-               mxc_gpio_set(37, 1);
+               gpio_direction_output(37, 1);
        }
 
        val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04;