+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2009-2011 Freescale Semiconductor, Inc.
* Author: Timur Tabi <timur@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
*/
/*
#include <fsl_mdio.h>
#include <malloc.h>
#include <fdt_support.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
#include "../common/ngpixis.h"
#include "../common/fman.h"
#ifdef CONFIG_FMAN_ENET
-#define BRDCFG1_EMI1_SEL_MASK 0x70
+#define BRDCFG1_EMI1_SEL_MASK 0x78
#define BRDCFG1_EMI1_SEL_SLOT1 0x10
#define BRDCFG1_EMI1_SEL_SLOT2 0x20
#define BRDCFG1_EMI1_SEL_SLOT5 0x30
#define BRDCFG2_REG_GPIO_SEL 0x20
+#define PHY_BASE_ADDR 0x00
+
/*
* BRDCFG1 mask and value for each MAC
*
bus->read = hydra_mdio_read;
bus->write = hydra_mdio_write;
bus->reset = hydra_mdio_reset;
- sprintf(bus->name, fakebusname);
+ strcpy(bus->name, fakebusname);
hmdio->realbus = miiphy_get_dev_by_name(realbusname);
if (!path)
path = alias;
+ do_fixup_by_path(fdt, path, "reg",
+ &mux, sizeof(mux), 1);
do_fixup_by_path(fdt, path, "fsl,hydra-mdio-muxval",
&mux, sizeof(mux), 1);
}
return;
}
- if (mux == BRDCFG1_EMI1_SEL_RGMII) {
+ if (mux == (BRDCFG1_EMI1_SEL_RGMII | BRDCFG1_EMI1_EN)) {
/* RGMII */
/* The RGMII PHY is identified by the MAC connected to it */
sprintf(phy, "phy_rgmii_%u", port == FM1_DTSEC4 ? 0 : 1);
fdt_set_phy_handle(fdt, compat, addr, phy);
+ return;
}
/* If it's not RGMII or XGMII, it must be SGMII */
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_FMAN_ENET
- struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
struct fsl_pq_mdio_info dtsec_mdio_info;
struct tgec_mdio_info tgec_mdio_info;
unsigned int i, slot;
int lane;
+ struct mii_dev *bus;
printf("Initializing Fman\n");
initialize_lane_to_slot();
- /*
- * Set TBIPA on FM1@DTSEC1. This is needed for configurations
- * where FM1@DTSEC1 isn't used directly, since it provides
- * MDIO for other ports.
- */
- out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE);
-
/* We want to use the PIXIS to configure MUX routing, not GPIOs. */
setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL);
}
}
+ bus = miiphy_get_dev_by_name("HYDRA_SGMII_MDIO");
+ set_sgmii_phy(bus, FM1_DTSEC1, CONFIG_SYS_NUM_FM1_DTSEC, PHY_BASE_ADDR);
+
/*
* For 10G, we only support one XAUI card per Fman. If present, then we
* force its routing and never touch those bits again, which removes the