#include <mpc5xxx.h>
#include <pci.h>
#include <command.h>
+#include <netdev.h>
#include "mt46v16m16-75.h"
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
-long int initdram(int board_type)
+phys_size_t initdram(int board_type)
{
ulong dramsize = 0;
ulong test1, test2;
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
- test1 = get_ram_size(CFG_SDRAM_BASE, 0x80000000);
+ test1 = get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x80000000);
sdram_start(1);
- test2 = get_ram_size(CFG_SDRAM_BASE, 0x80000000);
+ test2 = get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x80000000);
if (test1 > test2) {
sdram_start(0);
#if 0
/* find RAM size using SDRAM CS1 only */
sdram_start(0);
- get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+ get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
sdram_start(1);
- get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+ get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
sdram_start(0);
#endif
/* set SDRAM CS1 size according to the amount of RAM found */
void flash_afterinit(ulong size)
{
- if (size == CFG_FLASH_SIZE) {
+ if (size == CONFIG_SYS_FLASH_SIZE) {
/* adjust mapping */
*(vu_long *) MPC5XXX_BOOTCS_START =
*(vu_long *) MPC5XXX_CS0_START =
- START_REG(CFG_BOOTCS_START | size);
+ START_REG(CONFIG_SYS_BOOTCS_START | size);
*(vu_long *) MPC5XXX_BOOTCS_STOP =
*(vu_long *) MPC5XXX_CS0_STOP =
- STOP_REG(CFG_BOOTCS_START | size, size);
+ STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
}
}
}
#endif
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
#define GPIO_PSC1_4 0x01000000UL
else
*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
#define MPC5XXX_SIMPLEIO_GPIO_ENABLE (MPC5XXX_GPIO + 0x0004)
#define MPC5XXX_SIMPLEIO_GPIO_DIR (MPC5XXX_GPIO + 0x000C)
__asm__ volatile ("sync");
}
}
+
+int board_eth_init(bd_t *bis)
+{
+ return pci_eth_init(bis);
+}