Merge branch 'cleanups' into next

[oweals/u-boot.git] / board / earthlcd / favr-32-ezkit / favr-32-ezkit.c

diff --git a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
index 22b698128e5a391486cf92968b2a2005a5d3502a..8af680fe914ce78cab7ab74f321ad5cb5dc9dd6d 100644 (file)
--- a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
+++ b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
@@ -18,12 +18,13 @@
  * Place, Suite 330, Boston, MA 02111-1307 USA
  */
 #include <common.h>
+#include <netdev.h>
 
 #include <asm/io.h>
 #include <asm/sdram.h>
 #include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
 #include <asm/arch/hmatrix.h>
+#include <asm/arch/portmux.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -49,13 +50,13 @@ int board_early_init_f(void)
        /* Enable SDRAM in the EBI mux */
        hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
-       gpio_enable_ebi();
-       gpio_enable_usart3();
+       portmux_enable_ebi(32, 23, 0, PORTMUX_DRIVE_HIGH);
+       portmux_enable_usart3(PORTMUX_DRIVE_MIN);
 #if defined(CONFIG_MACB)
-       gpio_enable_macb0();
+       portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
 #endif
 #if defined(CONFIG_MMC)
-       gpio_enable_mmci();
+       portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
 #endif
 
        return 0;
@@ -75,20 +76,19 @@ phys_size_t initdram(int board_type)
        unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
 
        if (expected_size != actual_size)
-               printf("Warning: Only %u of %u MiB SDRAM is working\n",
+               printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
                                actual_size >> 20, expected_size >> 20);
 
        return actual_size;
 }
 
-void board_init_info(void)
+int board_early_init_r(void)
 {
        gd->bd->bi_phy_id[0] = 0x01;
+       return 0;
 }
 
 #if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 int board_eth_init(bd_t *bi)
 {
        return macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);