Merge branch 'master' of git://git.denx.de/u-boot-imx

[oweals/u-boot.git] / board / atmel / at91sam9rlek / at91sam9rlek.c

diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index 56ca1d4f7e0e8d4ec21894265c12fa452cfae257..0b603ed13a7f140d97ec97d8776a330f551acaa1 100644 (file)
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -7,21 +7,18 @@
  */
 
 #include <common.h>
+#include <debug_uart.h>
 #include <asm/io.h>
 #include <asm/arch/at91sam9rl.h>
 #include <asm/arch/at91sam9rl_matrix.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/gpio.h>
 
 #include <lcd.h>
 #include <atmel_lcdc.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -35,7 +32,6 @@ static void at91sam9rlek_nand_hw_init(void)
 {
        struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
        struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
-       struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
        unsigned long csa;
 
        /* Enable CS3 */
@@ -63,7 +59,7 @@ static void at91sam9rlek_nand_hw_init(void)
                AT91_SMC_MODE_TDF_CYCLE(2),
                &smc->cs[3].mode);
 
-       writel(1 << ATMEL_ID_PIOD, &pmc->pcer);
+       at91_periph_clk_enable(ATMEL_ID_PIOD);
 
        /* Configure RDY/BSY */
        at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
@@ -105,8 +101,6 @@ void lcd_disable(void)
 }
 static void at91sam9rlek_lcd_hw_init(void)
 {
-       struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
        at91_set_B_periph(AT91_PIN_PC1, 0);     /* LCDPWR */
        at91_set_A_periph(AT91_PIN_PC5, 0);     /* LCDHSYNC */
        at91_set_A_periph(AT91_PIN_PC6, 0);     /* LCDDOTCK */
@@ -129,7 +123,7 @@ static void at91sam9rlek_lcd_hw_init(void)
        at91_set_B_periph(AT91_PIN_PC24, 0);    /* LCDD22 */
        at91_set_B_periph(AT91_PIN_PC25, 0);    /* LCDD23 */
 
-       writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
+       at91_periph_clk_enable(ATMEL_ID_LCDC);
 }
 
 #ifdef CONFIG_LCD_INFO
@@ -154,7 +148,7 @@ void lcd_show_board_info(void)
                dram_size += gd->bd->bi_dram[i].size;
        nand_size = 0;
        for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-               nand_size += nand_info[i].size;
+               nand_size += nand_info[i]->size;
        lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
                dram_size >> 20,
                nand_size >> 20 );
@@ -162,17 +156,22 @@ void lcd_show_board_info(void)
 #endif /* CONFIG_LCD_INFO */
 #endif
 
-int board_early_init_f(void)
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
 {
-       struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
-       /* Enable clocks for all PIOs */
-       writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
-               (1 << ATMEL_ID_PIOC) | (1 << ATMEL_ID_PIOD),
-               &pmc->pcer);
+       at91_seriald_hw_init();
+}
+#endif
 
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+#ifdef CONFIG_DEBUG_UART
+       debug_uart_init();
+#endif
        return 0;
 }
+#endif
 
 int board_init(void)
 {
@@ -181,7 +180,6 @@ int board_init(void)
        /* adress of boot parameters */
        gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
-       at91_seriald_hw_init();
 #ifdef CONFIG_CMD_NAND
        at91sam9rlek_nand_hw_init();
 #endif