board: amlogic: move boards doc into doc/board/amlogic

[oweals/u-boot.git] / board / amlogic / sei510 / README

diff --git a/board/amlogic/sei510/README b/board/amlogic/sei510/README
deleted file mode 100644 (file)
index d9358aa..0000000
--- a/board/amlogic/sei510/README
+++ /dev/null
@@ -1,122 +0,0 @@
-U-Boot for Amlogic SEI510
-=======================
-
-SEI510 is a customer board manufactured by SEI Robotics with the following
-specifications:
-
- - Amlogic S905X2 ARM Cortex-A53 quad-core SoC
- - 2GB DDR4 SDRAM
- - 10/100 Ethernet (Internal PHY)
- - 1 x USB 3.0 Host
- - eMMC
- - SDcard
- - Infrared receiver
- - SDIO WiFi Module
-
-Currently the u-boot port supports the following devices:
- - serial
- - Ethernet
- - Regulators
- - Clock controller
-
-u-boot compilation
-==================
-
- > export CROSS_COMPILE=aarch64-none-elf-
- > make sei510_defconfig
- > make
-
-Image creation
-==============
-
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
-
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
- > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot
- > cd amlogic-u-boot
- > make g12a_u200_v1_defconfig
- > make
- > export UBOOTDIR=$PWD
-
-Download the latest Amlogic Buildroot package, and extract it :
- > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz
- > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader
- > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706
- > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip
-
-Go back to mainline U-Boot source tree then :
- > mkdir fip
-
- > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
- > cp $UBOOTDIR/build/scp_task/bl301.bin fip/
- > cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/
- > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/
- > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/
- > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/
- > cp $FIPDIR/g12a/ddr3_1d.fw fip/
- > cp $FIPDIR/g12a/ddr4_1d.fw fip/
- > cp $FIPDIR/g12a/ddr4_2d.fw fip/
- > cp $FIPDIR/g12a/diag_lpddr4.fw fip/
- > cp $FIPDIR/g12a/lpddr4_1d.fw fip/
- > cp $FIPDIR/g12a/lpddr4_2d.fw fip/
- > cp $FIPDIR/g12a/piei.fw fip/
- > cp u-boot.bin fip/bl33.bin
-
- > sh fip/blx_fix.sh \
-       fip/bl30.bin \
-       fip/zero_tmp \
-       fip/bl30_zero.bin \
-       fip/bl301.bin \
-       fip/bl301_zero.bin \
-       fip/bl30_new.bin \
-       bl30
-
- > sh fip/blx_fix.sh \
-       fip/bl2.bin \
-       fip/zero_tmp \
-       fip/bl2_zero.bin \
-       fip/acs.bin \
-       fip/bl21_zero.bin \
-       fip/bl2_new.bin \
-       bl2
-
- > $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
-                                       --output fip/bl30_new.bin.g12a.enc \
-                                       --level v3
- > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
-                                       --output fip/bl30_new.bin.enc \
-                                       --level v3 --type bl30
- > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
-                                       --output fip/bl31.img.enc \
-                                       --level v3 --type bl31
- > $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
-                                       --output fip/bl33.bin.enc \
-                                       --level v3 --type bl33
- > $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
-                                       --output fip/bl2.n.bin.sig
- > $FIPDIR/g12a/aml_encrypt_g12a --bootmk \
-               --output fip/u-boot.bin \
-               --bl2 fip/bl2.n.bin.sig \
-               --bl30 fip/bl30_new.bin.enc \
-               --bl31 fip/bl31.img.enc \
-               --bl33 fip/bl33.bin.enc \
-               --ddrfw1 fip/ddr4_1d.fw \
-               --ddrfw2 fip/ddr4_2d.fw \
-               --ddrfw3 fip/ddr3_1d.fw \
-               --ddrfw4 fip/piei.fw \
-               --ddrfw5 fip/lpddr4_1d.fw \
-               --ddrfw6 fip/lpddr4_2d.fw \
-               --ddrfw7 fip/diag_lpddr4.fw \
-               --level v3
-
-and then write the image to SD with:
-
- > DEV=/dev/your_sd_device
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444