Merge git://www.denx.de/git/u-boot

[oweals/u-boot.git] / board / amcc / sequoia / sequoia.c

diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index ff211aef2d703120f6e80d16433859c2e4d323e1..f823117687e70fc27bb083894a6515ee1ba2e7df 100644 (file)
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -25,7 +25,6 @@
 #include <common.h>
 #include <asm/processor.h>
 #include <ppc440.h>
-#include "sequoia.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -35,9 +34,9 @@ ulong flash_get_size (ulong base, int banknum);
 
 int board_early_init_f(void)
 {
-       unsigned long sdr0_cust0;
-       unsigned long sdr0_pfc1, sdr0_pfc2;
-       register uint reg;
+       u32 sdr0_cust0;
+       u32 sdr0_pfc1, sdr0_pfc2;
+       u32 reg;
 
        mtdcr(ebccfga, xbcfg);
        mtdcr(ebccfgd, 0xb8400000);
@@ -142,6 +141,7 @@ int misc_init_r(void)
 {
        uint pbcr;
        int size_val = 0;
+       u32 reg;
 #ifdef CONFIG_440EPX
        unsigned long usb2d0cr = 0;
        unsigned long usb2phy0cr, usb2h0cr = 0;
@@ -225,7 +225,7 @@ int misc_init_r(void)
        if (act == NULL || strcmp(act, "hostdev") == 0) {
                /* SDR Setting */
                mfsdr(SDR0_PFC1, sdr0_pfc1);
-               mfsdr(SDR0_USB0, usb2d0cr);
+               mfsdr(SDR0_USB2D0CR, usb2d0cr);
                mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
                mfsdr(SDR0_USB2H0CR, usb2h0cr);
 
@@ -253,7 +253,7 @@ int misc_init_r(void)
                sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;                /*0*/
 
                mtsdr(SDR0_PFC1, sdr0_pfc1);
-               mtsdr(SDR0_USB0, usb2d0cr);
+               mtsdr(SDR0_USB2D0CR, usb2d0cr);
                mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
                mtsdr(SDR0_USB2H0CR, usb2h0cr);
 
@@ -297,7 +297,7 @@ int misc_init_r(void)
                /* SDR Setting */
                mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
                mfsdr(SDR0_USB2H0CR, usb2h0cr);
-               mfsdr(SDR0_USB0, usb2d0cr);
+               mfsdr(SDR0_USB2D0CR, usb2d0cr);
                mfsdr(SDR0_PFC1, sdr0_pfc1);
 
                usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
@@ -322,7 +322,7 @@ int misc_init_r(void)
 
                mtsdr(SDR0_USB2H0CR, usb2h0cr);
                mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-               mtsdr(SDR0_USB0, usb2d0cr);
+               mtsdr(SDR0_USB2D0CR, usb2d0cr);
                mtsdr(SDR0_PFC1, sdr0_pfc1);
 
                /*clear resets*/
@@ -335,18 +335,37 @@ int misc_init_r(void)
        }
 #endif /* CONFIG_440EPX */
 
+       mfsdr(SDR0_SRST1, reg);         /* enable security/kasumi engines */
+       reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0);
+       mtsdr(SDR0_SRST1, reg);
+
+       /*
+        * Clear PLB4A0_ACR[WRP]
+        * This fix will make the MAL burst disabling patch for the Linux
+        * EMAC driver obsolete.
+        */
+       reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP;
+       mtdcr(plb4_acr, reg);
+
        return 0;
 }
 
 int checkboard(void)
 {
        char *s = getenv("serial#");
+       u8 rev;
+       u8 val;
 
 #ifdef CONFIG_440EPX
        printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board");
 #else
        printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
 #endif
+
+       rev = in8(CFG_BCSR_BASE + 0);
+       val = in8(CFG_BCSR_BASE + 5) & 0x01;
+       printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
+
        if (s != NULL) {
                puts(", serial# ");
                puts(s);
@@ -406,23 +425,10 @@ int testdram(void)
  *     certain pre-initialization actions.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+#if defined(CONFIG_PCI)
 int pci_pre_init(struct pci_controller *hose)
 {
        unsigned long addr;
-#if 0
-       /*--------------------------------------------------------------------------+
-        *      Cactus is always configured as the host & requires the
-        *      PCI arbiter to be enabled ???
-        *--------------------------------------------------------------------------*/
-       unsigned long strap;
-       mfsdr(sdr_sdstp1, strap);
-       if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
-               printf("PCI: SDR0_STRP1[PAE] not set.\n");
-               printf("PCI: Configuration aborted.\n");
-               return 0;
-       }
-#endif
 
        /*-------------------------------------------------------------------------+
          | Set priority for all PLB3 devices to 0.
@@ -460,7 +466,7 @@ int pci_pre_init(struct pci_controller *hose)
 
        return 1;
 }
-#endif                         /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) */
 
 /*************************************************************************
  *  pci_target_init
@@ -566,3 +572,13 @@ int is_pci_host(struct pci_controller *hose)
        return (1);
 }
 #endif                         /* defined(CONFIG_PCI) */
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+       return 0;       /* No hotkeys supported */
+}
+#endif /* CONFIG_POST */