/*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2006
*/
#include <common.h>
-#include <asm/processor.h>
+#include <libfdt.h>
+#include <fdt_support.h>
#include <ppc440.h>
-#include "sequoia.h"
+#include <asm/gpio.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/ppc4xx-intvec.h>
DECLARE_GLOBAL_DATA_PTR;
mtdcr(ebccfga, xbcfg);
mtdcr(ebccfgd, 0xb8400000);
- /*--------------------------------------------------------------------
- * Setup the GPIO pins
- *-------------------------------------------------------------------*/
- /* test-only: take GPIO init from pcs440ep ???? in config file */
- out32(GPIO0_OR, 0x00000000);
- out32(GPIO0_TCR, 0x0000000f);
- out32(GPIO0_OSRL, 0x50015400);
- out32(GPIO0_OSRH, 0x550050aa);
- out32(GPIO0_TSRL, 0x50015400);
- out32(GPIO0_TSRH, 0x55005000);
- out32(GPIO0_ISR1L, 0x50000000);
- out32(GPIO0_ISR1H, 0x00000000);
- out32(GPIO0_ISR2L, 0x00000000);
- out32(GPIO0_ISR2H, 0x00000100);
- out32(GPIO0_ISR3L, 0x00000000);
- out32(GPIO0_ISR3H, 0x00000000);
-
- out32(GPIO1_OR, 0x00000000);
- out32(GPIO1_TCR, 0xc2000000);
- out32(GPIO1_OSRL, 0x5c280000);
- out32(GPIO1_OSRH, 0x00000000);
- out32(GPIO1_TSRL, 0x0c000000);
- out32(GPIO1_TSRH, 0x00000000);
- out32(GPIO1_ISR1L, 0x00005550);
- out32(GPIO1_ISR1H, 0x00000000);
- out32(GPIO1_ISR2L, 0x00050000);
- out32(GPIO1_ISR2H, 0x00000000);
- out32(GPIO1_ISR3L, 0x01400000);
- out32(GPIO1_ISR3H, 0x00000000);
-
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
mtdcr(uic2sr, 0xffffffff); /* clear all */
/* 50MHz tmrclk */
- *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+ out_8((u8 *) CFG_BCSR_BASE + 0x04, 0x00);
/* clear write protects */
- *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
+ out_8((u8 *) CFG_BCSR_BASE + 0x07, 0x00);
/* enable Ethernet */
- *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00;
+ out_8((u8 *) CFG_BCSR_BASE + 0x08, 0x00);
/* enable USB device */
- *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20;
+ out_8((u8 *) CFG_BCSR_BASE + 0x09, 0x20);
/* select Ethernet pins */
mfsdr(SDR0_PFC1, sdr0_pfc1);
if (act == NULL || strcmp(act, "hostdev") == 0) {
/* SDR Setting */
mfsdr(SDR0_PFC1, sdr0_pfc1);
- mfsdr(SDR0_USB0, usb2d0cr);
+ mfsdr(SDR0_USB2D0CR, usb2d0cr);
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
mfsdr(SDR0_USB2H0CR, usb2h0cr);
sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0*/
mtsdr(SDR0_PFC1, sdr0_pfc1);
- mtsdr(SDR0_USB0, usb2d0cr);
+ mtsdr(SDR0_USB2D0CR, usb2d0cr);
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
mtsdr(SDR0_USB2H0CR, usb2h0cr);
/* SDR Setting */
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
mfsdr(SDR0_USB2H0CR, usb2h0cr);
- mfsdr(SDR0_USB0, usb2d0cr);
+ mfsdr(SDR0_USB2D0CR, usb2d0cr);
mfsdr(SDR0_PFC1, sdr0_pfc1);
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
mtsdr(SDR0_USB2H0CR, usb2h0cr);
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
- mtsdr(SDR0_USB0, usb2d0cr);
+ mtsdr(SDR0_USB2D0CR, usb2d0cr);
mtsdr(SDR0_PFC1, sdr0_pfc1);
/*clear resets*/
printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
#endif
- rev = in8(CFG_BCSR_BASE + 0);
- val = in8(CFG_BCSR_BASE + 5) & 0x01;
+ rev = in_8((void *)(CFG_BCSR_BASE + 0));
+ val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
if (s != NULL) {
}
#endif
+#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP)
+/*
+ * Assign interrupts to PCI devices.
+ */
+void sequoia_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+ pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIR2);
+}
+#endif
+
/*************************************************************************
* pci_pre_init
*
addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
mtdcr(plb1_acr, addr);
+#ifdef CONFIG_PCI_PNP
+ hose->fixup_irq = sequoia_pci_fixup_irq;
+#endif
return 1;
}
#endif /* defined(CONFIG_PCI) */
return 0; /* No hotkeys supported */
}
#endif /* CONFIG_POST */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 val[4];
+ int rc;
+
+ ft_cpu_setup(blob, bd);
+
+ /* Fixup NOR mapping */
+ val[0] = 0; /* chip select number */
+ val[1] = 0; /* always 0 */
+ val[2] = gd->bd->bi_flashstart;
+ val[3] = gd->bd->bi_flashsize;
+ rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+ val, sizeof(val), 1);
+ if (rc)
+ printf("Unable to update property NOR mapping, err=%s\n",
+ fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */