* The PS/2 mux on the BMS2003 board needs 450 ms after power on

[oweals/u-boot.git] / board / MAI / AmigaOneG3SE / board_asm_init.S

diff --git a/board/MAI/AmigaOneG3SE/board_asm_init.S b/board/MAI/AmigaOneG3SE/board_asm_init.S
index a421c5dc435483a39ea37a782df03ee7de549ecc..086b19c05240bfc1804a84461f36f4a9d596297d 100644 (file)
--- a/board/MAI/AmigaOneG3SE/board_asm_init.S
+++ b/board/MAI/AmigaOneG3SE/board_asm_init.S
@@ -1,14 +1,13 @@
-       #include        "macros.h"
-       
-       
+#include       "macros.h"
 
-#define GLOBALINFO0          0x50      
+
+#define GLOBALINFO0          0x50
 #define GLOBALINFO0_BO        (1<<7)
 #define GLOBALINFO2_B1ARBITER (1<<6)
 #define HBUSACR0              0x5c
 #define HBUSACR2_BURST        (1<<0)
 #define HBUSACR2_LAT          (1<<1)
-       
+
 #define RECEIVER_HOLDING 0
 #define TRANSMITTER_HOLDING 0
 #define INTERRUPT_ENABLE 1
@@ -35,9 +34,9 @@
 
 #define SUPERIO_1               ((7 << 3) | (0))
 #define SUPERIO_2               ((7 << 3) | (1))
-       
+
        .globl  board_asm_init
-       
+
 board_asm_init:
        mflr    r29
        /* Set 'Must-set' register */
@@ -77,7 +76,7 @@ board_asm_init:
        li      r5, 0x47
        bl      pci_write_cfg_byte*/
 
-       
+
        /* Enable NVRAM for environment */
        li      r3, 0
        li      r4, 0
@@ -91,7 +90,7 @@ board_asm_init:
        siowb   0x40, 0x08
        siowb   0x41, 0x01
        siowb   0x45, 0x80
-       siowb   0x46, 0x60      
+       siowb   0x46, 0x60
        siowb   0x47, 0x20
        siowb   0x48, 0x01
        siowb   0x4a, 0xc4
@@ -103,7 +102,7 @@ board_asm_init:
        siowb   0x56, 0x99
        siowb   0x57, 0x90
        siowb   0x85, 0x01
-               
+
        /* Enable configuration mode for SuperIO */
        li      r3, 0
        li      r4, (7<<3)
@@ -128,7 +127,7 @@ board_asm_init:
        ori     r3, r3, 0x0c
        outb    0x3f0, 0xe2
        outbr   0x3f1, r3
-       
+
        /* Disable configuration mode */
        li      r3, 0
        li      r4, (7<<3)
@@ -145,7 +144,7 @@ board_asm_init:
        mtlr    r29
        blr
 
-               
+
        .globl  new_reset
        .globl  new_reset_end
 new_reset:
@@ -153,5 +152,5 @@ new_reset:
        oris    r0, r0, 0xFFF0
        mtlr    r0
        blr
-       
-new_reset_end: 
\ No newline at end of file
+
+new_reset_end: