*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
+//kbuild:lib-$(CONFIG_ZCAT) += bbunzip.o
+//kbuild:lib-$(CONFIG_GUNZIP) += bbunzip.o
+//kbuild:lib-$(CONFIG_BZCAT) += bbunzip.o
+//kbuild:lib-$(CONFIG_BUNZIP2) += bbunzip.o
+
+/* lzop_main() uses bbunpack(), need this: */
+//kbuild:lib-$(CONFIG_LZOP) += bbunzip.o
+//kbuild:lib-$(CONFIG_LZOPCAT) += bbunzip.o
+//kbuild:lib-$(CONFIG_UNLZOP) += bbunzip.o
+/* bzip2_main() too: */
+//kbuild:lib-$(CONFIG_BZIP2) += bbunzip.o
+/* gzip_main() too: */
+//kbuild:lib-$(CONFIG_GZIP) += bbunzip.o
+
#include "libbb.h"
#include "bb_archive.h"
-/* Note: must be kept in sync with archival/lzop.c */
-enum {
- OPT_STDOUT = 1 << 0,
- OPT_FORCE = 1 << 1,
- /* only some decompressors: */
- OPT_VERBOSE = 1 << 2,
- OPT_QUIET = 1 << 3,
- OPT_DECOMPRESS = 1 << 4,
- OPT_TEST = 1 << 5,
- SEAMLESS_MAGIC = (1 << 31) * SEAMLESS_COMPRESSION,
-};
-
static
int open_to_or_warn(int to_fd, const char *filename, int flags, int mode)
{
}
int FAST_FUNC bbunpack(char **argv,
- IF_DESKTOP(long long) int FAST_FUNC (*unpacker)(transformer_aux_data_t *aux),
+ IF_DESKTOP(long long) int FAST_FUNC (*unpacker)(transformer_state_t *xstate),
char* FAST_FUNC (*make_new_name)(char *filename, const char *expected_ext),
const char *expected_ext
)
IF_DESKTOP(long long) int status = 0;
char *filename, *new_name;
smallint exitcode = 0;
- transformer_aux_data_t aux;
+ transformer_state_t xstate;
do {
/* NB: new_name is *maybe* malloc'ed! */
/* Open src */
if (filename) {
- if (!(option_mask32 & SEAMLESS_MAGIC)) {
+ if (!(option_mask32 & BBUNPK_SEAMLESS_MAGIC)) {
if (stat(filename, &stat_buf) != 0) {
err_name:
bb_simple_perror_msg(filename);
goto err;
} else {
/* "clever zcat" with FILE */
- int fd = open_zipped(filename);
+ /* fail_if_not_compressed because zcat refuses uncompressed input */
+ int fd = open_zipped(filename, /*fail_if_not_compressed:*/ 1);
if (fd < 0)
goto err_name;
xmove_fd(fd, STDIN_FILENO);
}
} else
- if (option_mask32 & SEAMLESS_MAGIC) {
+ if (option_mask32 & BBUNPK_SEAMLESS_MAGIC) {
/* "clever zcat" on stdin */
- if (setup_unzip_on_fd(STDIN_FILENO, /*fail_if_not_detected*/ 0))
+ if (setup_unzip_on_fd(STDIN_FILENO, /*fail_if_not_compressed*/ 1))
goto err;
}
/* Special cases: test, stdout */
- if (option_mask32 & (OPT_STDOUT|OPT_TEST)) {
- if (option_mask32 & OPT_TEST)
+ if (option_mask32 & (BBUNPK_OPT_STDOUT|BBUNPK_OPT_TEST)) {
+ if (option_mask32 & BBUNPK_OPT_TEST)
if (open_to_or_warn(STDOUT_FILENO, bb_dev_null, O_WRONLY, 0))
xfunc_die();
filename = NULL;
}
/* -f: overwrite existing output files */
- if (option_mask32 & OPT_FORCE) {
+ if (option_mask32 & BBUNPK_OPT_FORCE) {
unlink(new_name);
}
}
/* Check that the input is sane */
- if (!(option_mask32 & OPT_FORCE) && isatty(STDIN_FILENO)) {
- bb_error_msg_and_die("compressed data not read from terminal, "
+ if (!(option_mask32 & BBUNPK_OPT_FORCE) && isatty(STDIN_FILENO)) {
+ bb_simple_error_msg_and_die("compressed data not read from terminal, "
"use -f to force it");
}
- if (!(option_mask32 & SEAMLESS_MAGIC)) {
- init_transformer_aux_data(&aux);
- aux.check_signature = 1;
- status = unpacker(&aux);
+ if (!(option_mask32 & BBUNPK_SEAMLESS_MAGIC)) {
+ init_transformer_state(&xstate);
+ /*xstate.signature_skipped = 0; - already is */
+ /*xstate.src_fd = STDIN_FILENO; - already is */
+ xstate.dst_fd = STDOUT_FILENO;
+ status = unpacker(&xstate);
if (status < 0)
exitcode = 1;
} else {
xfunc_die();
}
- if (!(option_mask32 & OPT_STDOUT))
+ if (!(option_mask32 & BBUNPK_OPT_STDOUT))
xclose(STDOUT_FILENO); /* with error check! */
if (filename) {
char *del = new_name;
+
if (status >= 0) {
+ unsigned new_name_len;
+
/* TODO: restore other things? */
- if (aux.mtime != 0) {
+ if (xstate.mtime != 0) {
struct timeval times[2];
- times[1].tv_sec = times[0].tv_sec = aux.mtime;
+ times[1].tv_sec = times[0].tv_sec = xstate.mtime;
times[1].tv_usec = times[0].tv_usec = 0;
/* Note: we closed it first.
* On some systems calling utimes
utimes(new_name, times); /* ignoring errors */
}
- /* Delete _compressed_ file */
+ if (ENABLE_DESKTOP)
+ new_name_len = strlen(new_name);
+ /* Restore source filename (unless tgz -> tar case) */
+ if (new_name == filename) {
+ new_name_len = strlen(filename);
+ filename[new_name_len] = '.';
+ }
+ /* Extreme bloat for gunzip compat */
+ /* Some users do want this info... */
+ if (ENABLE_DESKTOP && (option_mask32 & BBUNPK_OPT_VERBOSE)) {
+ unsigned percent = status
+ ? ((uoff_t)stat_buf.st_size * 100u / (unsigned long long)status)
+ : 0;
+ fprintf(stderr, "%s: %u%% - replaced with %.*s\n",
+ filename,
+ 100u - percent,
+ new_name_len, new_name
+ );
+ }
+ /* Delete _source_ file */
del = filename;
- /* restore extension (unless tgz -> tar case) */
- if (new_name == filename)
- filename[strlen(filename)] = '.';
- }
- xunlink(del);
-
-#if 0 /* Currently buggy - wrong name: "a.gz: 261% - replaced with a.gz" */
- /* Extreme bloat for gunzip compat */
- if (ENABLE_DESKTOP && (option_mask32 & OPT_VERBOSE) && status >= 0) {
- fprintf(stderr, "%s: %u%% - replaced with %s\n",
- filename, (unsigned)(stat_buf.st_size*100 / (status+1)), new_name);
+ if (option_mask32 & BBUNPK_OPT_KEEP) /* ... unless -k */
+ del = NULL;
}
-#endif
-
+ if (del)
+ xunlink(del);
free_name:
if (new_name != filename)
free(new_name);
}
} while (*argv && *++argv);
- if (option_mask32 & OPT_STDOUT)
+ if (option_mask32 & BBUNPK_OPT_STDOUT)
xclose(STDOUT_FILENO); /* with error check! */
return exitcode;
}
-#if ENABLE_UNCOMPRESS || ENABLE_BUNZIP2 || ENABLE_UNLZMA || ENABLE_UNXZ
+#if ENABLE_UNCOMPRESS \
+ || ENABLE_FEATURE_BZIP2_DECOMPRESS \
+ || ENABLE_UNLZMA || ENABLE_LZCAT || ENABLE_LZMA \
+ || ENABLE_UNXZ || ENABLE_XZCAT || ENABLE_XZ
static
char* FAST_FUNC make_new_name_generic(char *filename, const char *expected_ext)
{
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
-
//usage:#define uncompress_trivial_usage
//usage: "[-cf] [FILE]..."
//usage:#define uncompress_full_usage "\n\n"
//usage: "\n -c Write to stdout"
//usage: "\n -f Overwrite"
+//config:config UNCOMPRESS
+//config: bool "uncompress (7.1 kb)"
+//config: default n # ancient
+//config: help
+//config: uncompress is used to decompress archives created by compress.
+//config: Not much used anymore, replaced by gzip/gunzip.
+
+//applet:IF_UNCOMPRESS(APPLET(uncompress, BB_DIR_BIN, BB_SUID_DROP))
+//kbuild:lib-$(CONFIG_UNCOMPRESS) += bbunzip.o
#if ENABLE_UNCOMPRESS
-static
-IF_DESKTOP(long long) int FAST_FUNC unpack_uncompress(transformer_aux_data_t *aux)
-{
- return unpack_Z_stream(aux, STDIN_FILENO, STDOUT_FILENO);
-}
int uncompress_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int uncompress_main(int argc UNUSED_PARAM, char **argv)
{
+// (N)compress 4.2.4.4:
+// -d If given, decompression is done instead
+// -c Write output on stdout, don't remove original
+// -b Parameter limits the max number of bits/code
+// -f Forces output file to be generated
+// -v Write compression statistics
+// -V Output vesion and compile options
+// -r Recursive. If a filename is a directory, descend into it and compress everything
getopt32(argv, "cf");
+
argv += optind;
- return bbunpack(argv, unpack_uncompress, make_new_name_generic, "Z");
+ return bbunpack(argv, unpack_Z_stream, make_new_name_generic, "Z");
}
#endif
* Portions of the lzw code are derived from the public domain 'compress'
* written by Spencer Thomas, Joe Orost, James Woods, Jim McKie, Steve Davies,
* Ken Turkowski, Dave Mack and Peter Jannesen.
- *
- * See the license_msg below and the file COPYING for the software license.
- * See the file algorithm.doc for the compression algorithms and file formats.
*/
-
//usage:#define gunzip_trivial_usage
-//usage: "[-cft] [FILE]..."
+//usage: "[-cfkt] [FILE]..."
//usage:#define gunzip_full_usage "\n\n"
//usage: "Decompress FILEs (or stdin)\n"
//usage: "\n -c Write to stdout"
//usage: "\n -f Force"
+//usage: "\n -k Keep input files"
//usage: "\n -t Test file integrity"
//usage:
//usage:#define gunzip_example_usage
//usage:#define zcat_full_usage "\n\n"
//usage: "Decompress to stdout"
-#if ENABLE_GUNZIP
+//config:config GUNZIP
+//config: bool "gunzip (11 kb)"
+//config: default y
+//config: select FEATURE_GZIP_DECOMPRESS
+//config: help
+//config: gunzip is used to decompress archives created by gzip.
+//config: You can use the '-t' option to test the integrity of
+//config: an archive, without decompressing it.
+//config:
+//config:config ZCAT
+//config: bool "zcat (24 kb)"
+//config: default y
+//config: select FEATURE_GZIP_DECOMPRESS
+//config: help
+//config: Alias to "gunzip -c".
+//config:
+//config:config FEATURE_GUNZIP_LONG_OPTIONS
+//config: bool "Enable long options"
+//config: default y
+//config: depends on (GUNZIP || ZCAT) && LONG_OPTS
+
+//applet:IF_GUNZIP(APPLET(gunzip, BB_DIR_BIN, BB_SUID_DROP))
+// APPLET_ODDNAME:name main location suid_type help
+//applet:IF_ZCAT(APPLET_ODDNAME(zcat, gunzip, BB_DIR_BIN, BB_SUID_DROP, zcat))
+#if ENABLE_FEATURE_GZIP_DECOMPRESS
static
char* FAST_FUNC make_new_name_gunzip(char *filename, const char *expected_ext UNUSED_PARAM)
{
}
return filename;
}
-static
-IF_DESKTOP(long long) int FAST_FUNC unpack_gunzip(transformer_aux_data_t *aux)
-{
- return unpack_gz_stream(aux, STDIN_FILENO, STDOUT_FILENO);
-}
+
+#if ENABLE_FEATURE_GUNZIP_LONG_OPTIONS
+static const char gunzip_longopts[] ALIGN1 =
+ "stdout\0" No_argument "c"
+ "to-stdout\0" No_argument "c"
+ "force\0" No_argument "f"
+ "test\0" No_argument "t"
+ "no-name\0" No_argument "n"
+ ;
+#endif
+
/*
* Linux kernel build uses gzip -d -n. We accept and ignore it.
* Man page says:
int gunzip_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int gunzip_main(int argc UNUSED_PARAM, char **argv)
{
- getopt32(argv, "cfvqdtn");
+#if ENABLE_FEATURE_GUNZIP_LONG_OPTIONS
+ getopt32long(argv, BBUNPK_OPTSTR "dtn", gunzip_longopts);
+#else
+ getopt32(argv, BBUNPK_OPTSTR "dtn");
+#endif
argv += optind;
/* If called as zcat...
* Normally, "zcat" is just "gunzip -c".
* But if seamless magic is enabled, then we are much more clever.
*/
- if (applet_name[1] == 'c')
- option_mask32 |= OPT_STDOUT | SEAMLESS_MAGIC;
+ if (ENABLE_ZCAT && (!ENABLE_GUNZIP || applet_name[1] == 'c'))
+ option_mask32 |= BBUNPK_OPT_STDOUT | BBUNPK_SEAMLESS_MAGIC;
- return bbunpack(argv, unpack_gunzip, make_new_name_gunzip, /*unused:*/ NULL);
+ return bbunpack(argv, unpack_gz_stream, make_new_name_gunzip, /*unused:*/ NULL);
}
-#endif
+#endif /* FEATURE_GZIP_DECOMPRESS */
/*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
//usage:#define bunzip2_trivial_usage
-//usage: "[-cf] [FILE]..."
+//usage: "[-cfk] [FILE]..."
//usage:#define bunzip2_full_usage "\n\n"
//usage: "Decompress FILEs (or stdin)\n"
//usage: "\n -c Write to stdout"
//usage: "\n -f Force"
+//usage: "\n -k Keep input files"
//usage:#define bzcat_trivial_usage
//usage: "[FILE]..."
//usage:#define bzcat_full_usage "\n\n"
//usage: "Decompress to stdout"
+
+//config:config BUNZIP2
+//config: bool "bunzip2 (8.7 kb)"
+//config: default y
+//config: select FEATURE_BZIP2_DECOMPRESS
+//config: help
+//config: bunzip2 is a compression utility using the Burrows-Wheeler block
+//config: sorting text compression algorithm, and Huffman coding. Compression
+//config: is generally considerably better than that achieved by more
+//config: conventional LZ77/LZ78-based compressors, and approaches the
+//config: performance of the PPM family of statistical compressors.
+//config:
+//config: Unless you have a specific application which requires bunzip2, you
+//config: should probably say N here.
+//config:
+//config:config BZCAT
+//config: bool "bzcat (8.7 kb)"
+//config: default y
+//config: select FEATURE_BZIP2_DECOMPRESS
+//config: help
+//config: Alias to "bunzip2 -c".
+
//applet:IF_BUNZIP2(APPLET(bunzip2, BB_DIR_USR_BIN, BB_SUID_DROP))
-//applet:IF_BUNZIP2(APPLET_ODDNAME(bzcat, bunzip2, BB_DIR_USR_BIN, BB_SUID_DROP, bzcat))
-#if ENABLE_BUNZIP2
-static
-IF_DESKTOP(long long) int FAST_FUNC unpack_bunzip2(transformer_aux_data_t *aux)
-{
- return unpack_bz2_stream(aux, STDIN_FILENO, STDOUT_FILENO);
-}
+// APPLET_ODDNAME:name main location suid_type help
+//applet:IF_BZCAT(APPLET_ODDNAME(bzcat, bunzip2, BB_DIR_USR_BIN, BB_SUID_DROP, bzcat))
+#if ENABLE_FEATURE_BZIP2_DECOMPRESS || ENABLE_BUNZIP2 || ENABLE_BZCAT
int bunzip2_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int bunzip2_main(int argc UNUSED_PARAM, char **argv)
{
- getopt32(argv, "cfvqdt");
+ getopt32(argv, BBUNPK_OPTSTR "dt");
argv += optind;
- if (applet_name[2] == 'c') /* bzcat */
- option_mask32 |= OPT_STDOUT;
+ if (ENABLE_BZCAT && (!ENABLE_BUNZIP2 || applet_name[2] == 'c')) /* bzcat */
+ option_mask32 |= BBUNPK_OPT_STDOUT;
- return bbunpack(argv, unpack_bunzip2, make_new_name_generic, "bz2");
+ return bbunpack(argv, unpack_bz2_stream, make_new_name_generic, "bz2");
}
#endif
*
* Licensed under GPLv2, see file LICENSE in this source tree.
*/
-
//usage:#define unlzma_trivial_usage
-//usage: "[-cf] [FILE]..."
+//usage: "[-cfk] [FILE]..."
//usage:#define unlzma_full_usage "\n\n"
//usage: "Decompress FILE (or stdin)\n"
//usage: "\n -c Write to stdout"
//usage: "\n -f Force"
+//usage: "\n -k Keep input files"
//usage:
//usage:#define lzma_trivial_usage
-//usage: "-d [-cf] [FILE]..."
+//usage: "-d [-cfk] [FILE]..."
//usage:#define lzma_full_usage "\n\n"
//usage: "Decompress FILE (or stdin)\n"
//usage: "\n -d Decompress"
//usage: "\n -c Write to stdout"
//usage: "\n -f Force"
+//usage: "\n -k Keep input files"
//usage:
//usage:#define lzcat_trivial_usage
//usage: "[FILE]..."
//usage:#define lzcat_full_usage "\n\n"
//usage: "Decompress to stdout"
-//usage:
+
+//config:config UNLZMA
+//config: bool "unlzma (7.5 kb)"
+//config: default y
+//config: help
+//config: unlzma is a compression utility using the Lempel-Ziv-Markov chain
+//config: compression algorithm, and range coding. Compression
+//config: is generally considerably better than that achieved by the bzip2
+//config: compressors.
+//config:
+//config:config LZCAT
+//config: bool "lzcat (7.5 kb)"
+//config: default y
+//config: help
+//config: Alias to "unlzma -c".
+//config:
+//config:config LZMA
+//config: bool "lzma -d"
+//config: default y
+//config: help
+//config: Enable this option if you want commands like "lzma -d" to work.
+//config: IOW: you'll get lzma applet, but it will always require -d option.
+
+//applet:IF_UNLZMA(APPLET(unlzma, BB_DIR_USR_BIN, BB_SUID_DROP))
+// APPLET_ODDNAME:name main location suid_type help
+//applet:IF_LZCAT(APPLET_ODDNAME(lzcat, unlzma, BB_DIR_USR_BIN, BB_SUID_DROP, lzcat))
+//applet:IF_LZMA( APPLET_ODDNAME(lzma, unlzma, BB_DIR_USR_BIN, BB_SUID_DROP, lzma))
+//kbuild:lib-$(CONFIG_UNLZMA) += bbunzip.o
+//kbuild:lib-$(CONFIG_LZCAT) += bbunzip.o
+//kbuild:lib-$(CONFIG_LZMA) += bbunzip.o
+#if ENABLE_UNLZMA || ENABLE_LZCAT || ENABLE_LZMA
+int unlzma_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
+int unlzma_main(int argc UNUSED_PARAM, char **argv)
+{
+ IF_LZMA(int opts =) getopt32(argv, BBUNPK_OPTSTR "dt");
+# if ENABLE_LZMA
+ /* lzma without -d or -t? */
+ if (applet_name[2] == 'm' && !(opts & (BBUNPK_OPT_DECOMPRESS|BBUNPK_OPT_TEST)))
+ bb_show_usage();
+# endif
+ /* lzcat? */
+ if (ENABLE_LZCAT && applet_name[2] == 'c')
+ option_mask32 |= BBUNPK_OPT_STDOUT;
+
+ argv += optind;
+ return bbunpack(argv, unpack_lzma_stream, make_new_name_generic, "lzma");
+}
+#endif
+
+
//usage:#define unxz_trivial_usage
-//usage: "[-cf] [FILE]..."
+//usage: "[-cfk] [FILE]..."
//usage:#define unxz_full_usage "\n\n"
//usage: "Decompress FILE (or stdin)\n"
//usage: "\n -c Write to stdout"
//usage: "\n -f Force"
+//usage: "\n -k Keep input files"
+//usage: "\n -t Test file integrity"
//usage:
//usage:#define xz_trivial_usage
-//usage: "-d [-cf] [FILE]..."
+//usage: "-d [-cfk] [FILE]..."
//usage:#define xz_full_usage "\n\n"
//usage: "Decompress FILE (or stdin)\n"
//usage: "\n -d Decompress"
//usage: "\n -c Write to stdout"
//usage: "\n -f Force"
+//usage: "\n -k Keep input files"
+//usage: "\n -t Test file integrity"
//usage:
//usage:#define xzcat_trivial_usage
//usage: "[FILE]..."
//usage:#define xzcat_full_usage "\n\n"
//usage: "Decompress to stdout"
-#if ENABLE_UNLZMA
-static
-IF_DESKTOP(long long) int FAST_FUNC unpack_unlzma(transformer_aux_data_t *aux)
-{
- return unpack_lzma_stream(aux, STDIN_FILENO, STDOUT_FILENO);
-}
-int unlzma_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
-int unlzma_main(int argc UNUSED_PARAM, char **argv)
-{
- IF_LZMA(int opts =) getopt32(argv, "cfvqdt");
-# if ENABLE_LZMA
- /* lzma without -d or -t? */
- if (applet_name[2] == 'm' && !(opts & (OPT_DECOMPRESS|OPT_TEST)))
- bb_show_usage();
-# endif
- /* lzcat? */
- if (applet_name[2] == 'c')
- option_mask32 |= OPT_STDOUT;
-
- argv += optind;
- return bbunpack(argv, unpack_unlzma, make_new_name_generic, "lzma");
-}
-#endif
-
-
-#if ENABLE_UNXZ
-static
-IF_DESKTOP(long long) int FAST_FUNC unpack_unxz(transformer_aux_data_t *aux)
-{
- return unpack_xz_stream(aux, STDIN_FILENO, STDOUT_FILENO);
-}
+//config:config UNXZ
+//config: bool "unxz (13 kb)"
+//config: default y
+//config: help
+//config: unxz is a unlzma successor.
+//config:
+//config:config XZCAT
+//config: bool "xzcat (13 kb)"
+//config: default y
+//config: help
+//config: Alias to "unxz -c".
+//config:
+//config:config XZ
+//config: bool "xz -d"
+//config: default y
+//config: help
+//config: Enable this option if you want commands like "xz -d" to work.
+//config: IOW: you'll get xz applet, but it will always require -d option.
+
+//applet:IF_UNXZ(APPLET(unxz, BB_DIR_USR_BIN, BB_SUID_DROP))
+// APPLET_ODDNAME:name main location suid_type help
+//applet:IF_XZCAT(APPLET_ODDNAME(xzcat, unxz, BB_DIR_USR_BIN, BB_SUID_DROP, xzcat))
+//applet:IF_XZ( APPLET_ODDNAME(xz, unxz, BB_DIR_USR_BIN, BB_SUID_DROP, xz))
+//kbuild:lib-$(CONFIG_UNXZ) += bbunzip.o
+//kbuild:lib-$(CONFIG_XZCAT) += bbunzip.o
+//kbuild:lib-$(CONFIG_XZ) += bbunzip.o
+#if ENABLE_UNXZ || ENABLE_XZCAT || ENABLE_XZ
int unxz_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int unxz_main(int argc UNUSED_PARAM, char **argv)
{
- IF_XZ(int opts =) getopt32(argv, "cfvqdt");
+ IF_XZ(int opts =) getopt32(argv, BBUNPK_OPTSTR "dt");
# if ENABLE_XZ
/* xz without -d or -t? */
- if (applet_name[2] == '\0' && !(opts & (OPT_DECOMPRESS|OPT_TEST)))
+ if (applet_name[2] == '\0' && !(opts & (BBUNPK_OPT_DECOMPRESS|BBUNPK_OPT_TEST)))
bb_show_usage();
# endif
/* xzcat? */
- if (applet_name[2] == 'c')
- option_mask32 |= OPT_STDOUT;
+ if (ENABLE_XZCAT && applet_name[2] == 'c')
+ option_mask32 |= BBUNPK_OPT_STDOUT;
argv += optind;
- return bbunpack(argv, unpack_unxz, make_new_name_generic, "xz");
+ return bbunpack(argv, unpack_xz_stream, make_new_name_generic, "xz");
}
#endif