/dts-v1/;
-/include/ "coreboot.dtsi"
+#include <dt-bindings/interrupt-router/intel-irq.h>
+
+/include/ "skeleton.dtsi"
+/include/ "serial.dtsi"
+/include/ "rtc.dtsi"
/ {
- #address-cells = <1>;
- #size-cells = <1>;
model = "Intel Crown Bay";
compatible = "intel,crownbay", "intel,queensbay";
+ aliases {
+ spi0 = "/spi";
+ };
+
config {
silent_console = <0>;
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "cpu-x86";
+ reg = <0>;
+ intel,apic-id = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "cpu-x86";
+ reg = <1>;
+ intel,apic-id = <1>;
+ };
+
+ };
+
gpioa {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
bank-name = "B";
};
- serial {
- reg = <0x3f8 8>;
- clock-frequency = <115200>;
+ chosen {
+ /*
+ * By default the legacy superio serial port is used as the
+ * U-Boot serial console. If we want to use UART from Topcliff
+ * PCH as the console, change this property to &pciuart#.
+ *
+ * For example, stdout-path = &pciuart0 will use the first
+ * UART on Topcliff PCH.
+ */
+ stdout-path = "/serial";
};
- chosen { };
- memory { device_type = "memory"; reg = <0 0>; };
-
spi {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "intel,ich7";
+ compatible = "intel,ich-spi";
spi-flash@0 {
reg = <0>;
compatible = "sst,25vf016b", "spi-flash";
memory-map = <0xffe00000 0x00200000>;
};
};
+
+ microcode {
+ update@0 {
+#include "microcode/m0220661105_cv.dtsi"
+ };
+ };
+
+ pci {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "pci-x86";
+ device_type = "pci";
+ u-boot,dm-pre-reloc;
+ ranges = <0x02000000 0x0 0x40000000 0x40000000 0 0x80000000
+ 0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
+ 0x01000000 0x0 0x2000 0x2000 0 0xe000>;
+
+ pcie@17,0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "intel,pci";
+ device_type = "pci";
+
+ topcliff@0,0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "intel,pci";
+ device_type = "pci";
+
+ pciuart0: uart@a,1 {
+ compatible = "pci8086,8811.00",
+ "pci8086,8811",
+ "pciclass,070002",
+ "pciclass,0700",
+ "x86-uart";
+ reg = <0x00025100 0x0 0x0 0x0 0x0
+ 0x01025110 0x0 0x0 0x0 0x0>;
+ reg-shift = <0>;
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+
+ pciuart1: uart@a,2 {
+ compatible = "pci8086,8812.00",
+ "pci8086,8812",
+ "pciclass,070002",
+ "pciclass,0700",
+ "x86-uart";
+ reg = <0x00025200 0x0 0x0 0x0 0x0
+ 0x01025210 0x0 0x0 0x0 0x0>;
+ reg-shift = <0>;
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+
+ pciuart2: uart@a,3 {
+ compatible = "pci8086,8813.00",
+ "pci8086,8813",
+ "pciclass,070002",
+ "pciclass,0700",
+ "x86-uart";
+ reg = <0x00025300 0x0 0x0 0x0 0x0
+ 0x01025310 0x0 0x0 0x0 0x0>;
+ reg-shift = <0>;
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+
+ pciuart3: uart@a,4 {
+ compatible = "pci8086,8814.00",
+ "pci8086,8814",
+ "pciclass,070002",
+ "pciclass,0700",
+ "x86-uart";
+ reg = <0x00025400 0x0 0x0 0x0 0x0
+ 0x01025410 0x0 0x0 0x0 0x0>;
+ reg-shift = <0>;
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+ };
+ };
+
+ irq-router@1f,0 {
+ reg = <0x0000f800 0 0 0 0>;
+ compatible = "intel,irq-router";
+ intel,pirq-config = "pci";
+ intel,pirq-link = <0x60 8>;
+ intel,pirq-mask = <0xdee0>;
+ intel,pirq-routing = <
+ /* TunnelCreek PCI devices */
+ PCI_BDF(0, 2, 0) INTA PIRQE
+ PCI_BDF(0, 3, 0) INTA PIRQF
+ PCI_BDF(0, 23, 0) INTA PIRQA
+ PCI_BDF(0, 23, 0) INTB PIRQB
+ PCI_BDF(0, 23, 0) INTC PIRQC
+ PCI_BDF(0, 23, 0) INTD PIRQD
+ PCI_BDF(0, 24, 0) INTA PIRQB
+ PCI_BDF(0, 24, 0) INTB PIRQC
+ PCI_BDF(0, 24, 0) INTC PIRQD
+ PCI_BDF(0, 24, 0) INTD PIRQA
+ PCI_BDF(0, 25, 0) INTA PIRQC
+ PCI_BDF(0, 25, 0) INTB PIRQD
+ PCI_BDF(0, 25, 0) INTC PIRQA
+ PCI_BDF(0, 25, 0) INTD PIRQB
+ PCI_BDF(0, 26, 0) INTA PIRQD
+ PCI_BDF(0, 26, 0) INTB PIRQA
+ PCI_BDF(0, 26, 0) INTC PIRQB
+ PCI_BDF(0, 26, 0) INTD PIRQC
+ PCI_BDF(0, 27, 0) INTA PIRQG
+ /*
+ * Topcliff PCI devices
+ *
+ * Note on the Crown Bay board, Topcliff chipset
+ * is connected to TunnelCreek PCIe port 0, so
+ * its bus number is 1 for its PCIe port and 2
+ * for its PCI devices per U-Boot current PCI
+ * bus enumeration algorithm.
+ */
+ PCI_BDF(1, 0, 0) INTA PIRQA
+ PCI_BDF(2, 0, 1) INTA PIRQA
+ PCI_BDF(2, 0, 2) INTA PIRQA
+ PCI_BDF(2, 2, 0) INTB PIRQD
+ PCI_BDF(2, 2, 1) INTB PIRQD
+ PCI_BDF(2, 2, 2) INTB PIRQD
+ PCI_BDF(2, 2, 3) INTB PIRQD
+ PCI_BDF(2, 2, 4) INTB PIRQD
+ PCI_BDF(2, 4, 0) INTC PIRQC
+ PCI_BDF(2, 4, 1) INTC PIRQC
+ PCI_BDF(2, 6, 0) INTD PIRQB
+ PCI_BDF(2, 8, 0) INTA PIRQA
+ PCI_BDF(2, 8, 1) INTA PIRQA
+ PCI_BDF(2, 8, 2) INTA PIRQA
+ PCI_BDF(2, 8, 3) INTA PIRQA
+ PCI_BDF(2, 10, 0) INTB PIRQD
+ PCI_BDF(2, 10, 1) INTB PIRQD
+ PCI_BDF(2, 10, 2) INTB PIRQD
+ PCI_BDF(2, 10, 3) INTB PIRQD
+ PCI_BDF(2, 10, 4) INTB PIRQD
+ PCI_BDF(2, 12, 0) INTC PIRQC
+ PCI_BDF(2, 12, 1) INTC PIRQC
+ PCI_BDF(2, 12, 2) INTC PIRQC
+ PCI_BDF(2, 12, 3) INTC PIRQC
+ PCI_BDF(2, 12, 4) INTC PIRQC
+ >;
+ };
+ };
+
};