x86: Call lapic_setup() in interrupt_init()

[oweals/u-boot.git] / arch / x86 / Kconfig

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1a9fa400812e521ea49311d4802b45b9532cb4f8..65cbb9cc660da3a4c4b763a610beb8ddc7c3aa1f 100644 (file)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -8,6 +8,9 @@ choice
        prompt "Mainboard vendor"
        default VENDOR_EMULATION
 
+config VENDOR_CONGATEC
+       bool "congatec"
+
 config VENDOR_COREBOOT
        bool "coreboot"
 
@@ -26,6 +29,7 @@ config VENDOR_INTEL
 endchoice
 
 # board-specific options below
+source "board/congatec/Kconfig"
 source "board/coreboot/Kconfig"
 source "board/efi/Kconfig"
 source "board/emulation/Kconfig"
@@ -34,6 +38,7 @@ source "board/intel/Kconfig"
 
 # platform-specific options below
 source "arch/x86/cpu/baytrail/Kconfig"
+source "arch/x86/cpu/broadwell/Kconfig"
 source "arch/x86/cpu/coreboot/Kconfig"
 source "arch/x86/cpu/ivybridge/Kconfig"
 source "arch/x86/cpu/qemu/Kconfig"
@@ -42,6 +47,9 @@ source "arch/x86/cpu/queensbay/Kconfig"
 
 # architecture-specific options below
 
+config AHCI
+       default y
+
 config SYS_MALLOC_F_LEN
        default 0x800
 
@@ -266,6 +274,13 @@ config ENABLE_MRC_CACHE
          to be used for speeding up boot time on future reboots and/or
          power cycles.
 
+         For platforms that use Intel FSP for the memory initialization,
+         please check FSP output HOB via U-Boot command 'fsp hob' to see
+         if there is FSP_NON_VOLATILE_STORAGE_HOB_GUID (asm/fsp/fsp_hob.h).
+         If such GUID does not exist, MRC cache is not avaiable on such
+         platform (eg: Intel Queensbay), which means selecting this option
+         here does not make any difference.
+
 config HAVE_MRC
        bool "Add a System Agent binary"
        depends on !HAVE_FSP
@@ -431,21 +446,13 @@ config GENERATE_MP_TABLE
 config GENERATE_ACPI_TABLE
        bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
        default n
+       select QFW if QEMU
        help
          The Advanced Configuration and Power Interface (ACPI) specification
          provides an open standard for device configuration and management
          by the operating system. It defines platform-independent interfaces
          for configuration and power management monitoring.
 
-config QEMU_ACPI_TABLE
-       bool "Load ACPI table from QEMU fw_cfg interface"
-       depends on GENERATE_ACPI_TABLE && QEMU
-       default y
-       help
-         By default, U-Boot generates its own ACPI tables. This option, if
-         enabled, disables U-Boot's version and loads ACPI tables generated
-         by QEMU.
-
 config GENERATE_SMBIOS_TABLE
        bool "Generate an SMBIOS (System Management BIOS) table"
        default y
@@ -531,6 +538,20 @@ config SEABIOS
 
          Check http://www.seabios.org/SeaBIOS for details.
 
+config HIGH_TABLE_SIZE
+       hex "Size of configuration tables which reside in high memory"
+       default 0x10000
+       depends on SEABIOS
+       help
+         SeaBIOS itself resides in E seg and F seg, where U-Boot puts all
+         configuration tables like PIRQ/MP/ACPI. To avoid conflicts, U-Boot
+         puts a copy of configuration tables in high memory region which
+         is reserved on the stack before relocation. The region size is
+         determined by this option.
+
+         Increse it if the default size does not fit the board's needs.
+         This is most likely due to a large ACPI DSDT table is used.
+
 source "arch/x86/lib/efi/Kconfig"
 
 endmenu