static char *failed = "*** failed ***\n";
-#if defined(CONFIG_OXC) || defined(CONFIG_PCU_E) || defined(CONFIG_RMU)
+#if defined(CONFIG_OXC) || defined(CONFIG_RMU)
extern flash_info_t flash_info[];
#endif
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_ENV_IS_EMBEDDED)
-#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
-#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
- (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
- defined(CONFIG_ENV_IS_IN_NVRAM)
-#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
-#else
-#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
-#endif
-
#if !defined(CONFIG_SYS_MEM_TOP_HIDE)
#define CONFIG_SYS_MEM_TOP_HIDE 0
#endif
static int init_baudrate (void)
{
char tmp[64]; /* long enough for environment variables */
- int i = getenv_r ("baudrate", tmp, sizeof (tmp));
+ int i = getenv_f("baudrate", tmp, sizeof (tmp));
gd->baudrate = (i > 0)
? (int) simple_strtoul (tmp, NULL, 10)
}
void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info")));
+int __board_flash_wp_on(void)
+{
+ /*
+ * Most flashes can't be detected when write protection is enabled,
+ * so provide a way to let U-Boot gracefully ignore write protected
+ * devices.
+ */
+ return 0;
+}
+int board_flash_wp_on(void) __attribute__((weak, alias("__board_flash_wp_on")));
static int init_func_ram (void)
{
/*
* reserve protected RAM
*/
- i = getenv_r ("pram", (char *)tmp, sizeof (tmp));
+ i = getenv_f("pram", (char *)tmp, sizeof (tmp));
reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM;
addr -= (reg << 10); /* size is in kB */
debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
*/
addr_sp -= sizeof (bd_t);
bd = (bd_t *) addr_sp;
+ memset(bd, 0, sizeof(bd_t));
gd->bd = bd;
debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
sizeof (bd_t), addr_sp);
bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */
bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
-#ifdef CONFIG_IP860
- bd->bi_sramstart = SRAM_BASE; /* start of SRAM memory */
- bd->bi_sramsize = SRAM_SIZE; /* size of SRAM memory */
-#elif defined CONFIG_MPC8220
+#ifdef CONFIG_SYS_SRAM_BASE
bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM memory */
bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM memory */
-#else
- bd->bi_sramstart = 0; /* FIXME */ /* start of SRAM memory */
- bd->bi_sramsize = 0; /* FIXME */ /* size of SRAM memory */
#endif
#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
}
#endif
- bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
-
WATCHDOG_RESET ();
bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
#endif
+#ifdef CONFIG_SYS_EXTRA_ENV_RELOC
+ /*
+ * Some systems need to relocate the env_addr pointer early because the
+ * location it points to will get invalidated before env_relocate is
+ * called. One example is on systems that might use a L2 or L3 cache
+ * in SRAM mode and initialize that cache from SRAM mode back to being
+ * a cache in cpu_init_r.
+ */
+ gd->env_addr += dest_addr - CONFIG_SYS_MONITOR_BASE;
+#endif
+
#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
#endif
unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */
#endif
-#if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT)
/*
- * Do PCI configuration on BAB7xx and CPC45 _before_ the flash
- * gets initialised, because we need the ISA resp. PCI_to_LOCAL bus
- * bridge there.
+ * Do early PCI configuration _before_ the flash gets initialised,
+ * because PCU ressources are crucial for flash access on some boards.
*/
pci_init ();
#endif
-#if defined(CONFIG_BAB7xx)
+#if defined(CONFIG_WINBOND_83C553)
/*
* Initialise the ISA bridge
*/
#if !defined(CONFIG_SYS_NO_FLASH)
puts ("FLASH: ");
- if ((flash_size = flash_init ()) > 0) {
+ if (board_flash_wp_on()) {
+ printf("Uninitialized - Write Protect On\n");
+ /* Since WP is on, we can't find real size. Set to 0 */
+ flash_size = 0;
+ } else if ((flash_size = flash_init ()) > 0) {
# ifdef CONFIG_SYS_FLASH_CHECKSUM
print_size (flash_size, "");
/*
#endif
-# if defined(CONFIG_PCU_E) || defined(CONFIG_OXC) || defined(CONFIG_RMU)
+# if defined(CONFIG_OXC) || defined(CONFIG_RMU)
/* flash mapped at end of memory map */
- bd->bi_flashoffset = TEXT_BASE + flash_size;
+ bd->bi_flashoffset = CONFIG_SYS_TEXT_BASE + flash_size;
# elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */
-# else
- bd->bi_flashoffset = 0;
# endif
-#else /* CONFIG_SYS_NO_FLASH */
-
- bd->bi_flashsize = 0;
- bd->bi_flashstart = 0;
- bd->bi_flashoffset = 0;
#endif /* !CONFIG_SYS_NO_FLASH */
WATCHDOG_RESET ();
nand_init(); /* go init the NAND */
#endif
+#ifdef CONFIG_GENERIC_MMC
+/*
+ * MMC initialization is called before relocating env.
+ * Thus It is required that operations like pin multiplexer
+ * be put in board_init.
+ */
+ WATCHDOG_RESET ();
+ puts ("MMC: ");
+ mmc_initialize (bd);
+#endif
+
/* relocate environment function pointers etc. */
env_relocate ();
* Fill in missing fields of bd_info.
* We do this here, where we have "normal" access to the
* environment; we used to do this still running from ROM,
- * where had to use getenv_r(), which can be pretty slow when
+ * where had to use getenv_f(), which can be pretty slow when
* the environment is in EEPROM.
*/
if (s && ((*s == 'y') || (*s == 'Y'))) {
bd->bi_iic_fast[0] = 1;
bd->bi_iic_fast[1] = 1;
- } else {
- bd->bi_iic_fast[0] = 0;
- bd->bi_iic_fast[1] = 0;
}
}
-#else
- bd->bi_iic_fast[0] = 0;
- bd->bi_iic_fast[1] = 0;
#endif /* CONFIG_I2CFAST */
#endif /* CONFIG_405GP, CONFIG_405EP */
#endif /* CONFIG_SYS_EXTBDINFO */
WATCHDOG_RESET ();
-#if defined(CONFIG_PCI) && !defined(CONFIG_BAB7xx) && !defined(CONFIG_CPC45)
+#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT)
/*
* Do pci configuration
*/
*/
interrupt_init ();
- /* Must happen after interrupts are initialized since
- * an irq handler gets installed
- */
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
- serial_buffered_init();
-#endif
-
#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
#endif
scsi_init ();
#endif
-#ifdef CONFIG_GENERIC_MMC
- WATCHDOG_RESET ();
- puts ("MMC: ");
- mmc_initialize (bd);
-#endif
-
#if defined(CONFIG_CMD_DOC)
WATCHDOG_RESET ();
puts ("DOC: ");