i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
-#ifdef CONFIG_FADS
- /* Reset ADV7176 chip */
- debug ("[VIDEO ENCODER] Resetting encoder...\n");
- (*(int *) BCSR4) &= ~(1 << 21);
-
- /* Wait for 5 ms inside the reset */
- debug ("[VIDEO ENCODER] Waiting for encoder reset...\n");
- udelay (5000);
-
- /* Take ADV7176 out of reset */
- (*(int *) BCSR4) |= 1 << 21;
-
- /* Wait for 5 ms after the reset */
- udelay (5000);
-#endif /* CONFIG_FADS */
-
/* Send configuration */
#ifdef DEBUG
{
debug ("[VIDEO CTRL] Turning off video controller...\n");
SETBIT (immap->im_vid.vid_vccr, VIDEO_VCCR_VON, 0);
-#ifdef CONFIG_FADS
- /* Turn on Video Port LED */
- debug ("[VIDEO CTRL] Turning off video port led...\n");
- SETBIT (*(int *) BCSR4, VIDEO_BCSR4_VIDLED_BIT, 1);
-
- /* Disable internal clock */
- debug ("[VIDEO CTRL] Disabling internal clock...\n");
- SETBIT (*(int *) BCSR4, VIDEO_BCSR4_EXTCLK_BIT, 0);
-#endif
-
/* Generate and make active a new video mode */
debug ("[VIDEO CTRL] Generating video mode...\n");
video_mode_generate ();
immap->im_ioport.iop_pdpar = 0x1fff;
immap->im_ioport.iop_pddir = 0x0000;
-#ifdef CONFIG_FADS
- /* Turn on Video Port Clock - ONLY AFTER SET VCCR TO ENABLE EXTERNAL CLOCK */
- debug ("[VIDEO CTRL] Turning on video clock...\n");
- SETBIT (*(int *) BCSR4, VIDEO_BCSR4_EXTCLK_BIT, 1);
-
- /* Turn on Video Port LED */
- debug ("[VIDEO CTRL] Turning on video port led...\n");
- SETBIT (*(int *) BCSR4, VIDEO_BCSR4_VIDLED_BIT, 0);
-#endif
#ifdef CONFIG_RRVISION
debug ("PC5->Output(1): enable PAL clock");
immap->im_ioport.iop_pcpar &= ~(0x0400);
}
}
-void video_putc (const char c)
+void video_putc(struct stdio_dev *dev, const char c)
{
if (!video_enable) {
serial_putc (c);
}
}
-void video_puts (const char *s)
+void video_puts(struct stdio_dev *dev, const char *s)
{
int count = strlen (s);
serial_putc (*s++);
else
while (count--)
- video_putc (*s++);
+ video_putc(dev, *s++);
}
/************************************************************************/
{
u16 *screen = video_fb_address, width = VIDEO_COLS;
#ifdef VIDEO_INFO
-# ifndef CONFIG_FADS
char temp[32];
-# endif
char info[80];
#endif /* VIDEO_INFO */
sprintf (info, " Wolfgang DENK, wd@denx.de");
video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2,
info);
-#ifndef CONFIG_FADS /* all normal boards */
+
/* leave one blank line */
- sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash",
+ sprintf(info, "MPC823 CPU at %s MHz, %ld MiB RAM, %ld MiB Flash",
strmhz(temp, gd->cpu_clk),
gd->ram_size >> 20,
gd->bd->bi_flashsize >> 20 );
video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 4,
info);
-#else /* FADS :-( */
- sprintf (info, "MPC823 CPU at 50 MHz on FADS823 board");
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT,
- info);
-
- sprintf (info, "2MB FLASH - 8MB DRAM - 4MB SRAM");
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2,
- info);
-#endif
#endif
return video_fb_address + VIDEO_LOGO_HEIGHT * VIDEO_LINE_LEN;