/*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
/*
#include <tsec.h>
#include <netdev.h>
#include <fsl_esdhc.h>
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-#include <asm/immap_qe.h>
+#if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_MPC831x)
+#include <linux/immap_qe.h>
#include <asm/io.h>
#endif
u32 partid;
} cpu_type_list [] = {
CPU_TYPE_ENTRY(8308),
+ CPU_TYPE_ENTRY(8309),
CPU_TYPE_ENTRY(8311),
CPU_TYPE_ENTRY(8313),
CPU_TYPE_ENTRY(8314),
printf(" at %s MHz, ", strmhz(buf, clock));
- printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk));
+ printf("CSB: %s MHz\n", strmhz(buf, gd->arch.csb_clk));
return 0;
}
-
-/*
- * Program a UPM with the code supplied in the table.
- *
- * The 'dummy' variable is used to increment the MAD. 'dummy' is
- * supposed to be a pointer to the memory of the device being
- * programmed by the UPM. The data in the MDR is written into
- * memory and the MAD is incremented every time there's a write
- * to 'dummy'. Unfortunately, the current prototype for this
- * function doesn't allow for passing the address of this
- * device, and changing the prototype will break a number lots
- * of other code, so we need to use a round-about way of finding
- * the value for 'dummy'.
- *
- * The value can be extracted from the base address bits of the
- * Base Register (BR) associated with the specific UPM. To find
- * that BR, we need to scan all 8 BRs until we find the one that
- * has its MSEL bits matching the UPM we want. Once we know the
- * right BR, we can extract the base address bits from it.
- *
- * The MxMR and the BR and OR of the chosen bank should all be
- * configured before calling this function.
- *
- * Parameters:
- * upm: 0=UPMA, 1=UPMB, 2=UPMC
- * table: Pointer to an array of values to program
- * size: Number of elements in the array. Must be 64 or less.
- */
-void upmconfig (uint upm, uint *table, uint size)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile fsl_lbus_t *lbus = &immap->lbus;
- volatile uchar *dummy = NULL;
- const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */
- volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */
- uint i;
-
- /* Scan all the banks to determine the base address of the device */
- for (i = 0; i < 8; i++) {
- if ((lbus->bank[i].br & BR_MSEL) == msel) {
- dummy = (uchar *) (lbus->bank[i].br & BR_BA);
- break;
- }
- }
-
- if (!dummy) {
- printf("Error: %s() could not find matching BR\n", __FUNCTION__);
- hang();
- }
-
- /* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
- *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
-
- for (i = 0; i < size; i++) {
- lbus->mdr = table[i];
- __asm__ __volatile__ ("sync");
- *dummy = 0; /* Write the value to memory and increment MAD */
- __asm__ __volatile__ ("sync");
- while(((*mxmr & 0x3f) != ((i + 1) & 0x3f)));
- }
-
- /* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
- *mxmr &= 0xCFFFFFC0;
-}
-
-
int
do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
unsigned long get_tbclk(void)
{
- ulong tbclk;
-
- tbclk = (gd->bus_clk + 3L) / 4L;
-
- return tbclk;
+ return (gd->bus_clk + 3L) / 4L;
}