+++ /dev/null
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with
- * changes based on the file arch/powerpc/mbxboot/m8260_tty.c from the
- * Linux/PPC sources (m8260_tty.c had no copyright info in it).
- */
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <asm/cpm_8260.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CONS_ON_SMC)
-
-#if CONFIG_CONS_INDEX == 1 /* Console on SMC1 */
-
-#define SMC_INDEX 0
-#define PROFF_SMC_BASE PROFF_SMC1_BASE
-#define PROFF_SMC PROFF_SMC1
-#define CPM_CR_SMC_PAGE CPM_CR_SMC1_PAGE
-#define CPM_CR_SMC_SBLOCK CPM_CR_SMC1_SBLOCK
-#define CMXSMR_MASK (CMXSMR_SMC1|CMXSMR_SMC1CS_MSK)
-#define CMXSMR_VALUE CMXSMR_SMC1CS_BRG7
-
-#elif CONFIG_CONS_INDEX == 2 /* Console on SMC2 */
-
-#define SMC_INDEX 1
-#define PROFF_SMC_BASE PROFF_SMC2_BASE
-#define PROFF_SMC PROFF_SMC2
-#define CPM_CR_SMC_PAGE CPM_CR_SMC2_PAGE
-#define CPM_CR_SMC_SBLOCK CPM_CR_SMC2_SBLOCK
-#define CMXSMR_MASK (CMXSMR_SMC2|CMXSMR_SMC2CS_MSK)
-#define CMXSMR_VALUE CMXSMR_SMC2CS_BRG8
-
-#else
-
-#error "console not correctly defined"
-
-#endif
-
-#if !defined(CONFIG_SYS_SMC_RXBUFLEN)
-#define CONFIG_SYS_SMC_RXBUFLEN 1
-#define CONFIG_SYS_MAXIDLE 0
-#else
-#if !defined(CONFIG_SYS_MAXIDLE)
-#error "you must define CONFIG_SYS_MAXIDLE"
-#endif
-#endif
-
-typedef volatile struct serialbuffer {
- cbd_t rxbd; /* Rx BD */
- cbd_t txbd; /* Tx BD */
- uint rxindex; /* index for next character to read */
- volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
- volatile uchar txbuf; /* tx buffers */
-} serialbuffer_t;
-
-/* map rs_table index to baud rate generator index */
-static unsigned char brg_map[] = {
- 6, /* BRG7 for SMC1 */
- 7, /* BRG8 for SMC2 */
- 0, /* BRG1 for SCC1 */
- 1, /* BRG1 for SCC2 */
- 2, /* BRG1 for SCC3 */
- 3, /* BRG1 for SCC4 */
-};
-
-static int mpc8260_smc_serial_init(void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile smc_t *sp;
- volatile smc_uart_t *up;
- volatile cpm8260_t *cp = &(im->im_cpm);
- uint dpaddr;
- volatile serialbuffer_t *rtx;
-
- /* initialize pointers to SMC */
-
- sp = (smc_t *) &(im->im_smc[SMC_INDEX]);
- im->im_dprambase16[PROFF_SMC_BASE / sizeof(u16)] = PROFF_SMC;
- up = (smc_uart_t *)&im->im_dprambase[PROFF_SMC];
-
- /* Disable transmitter/receiver. */
- sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
- /* NOTE: I/O port pins are set up via the iop_conf_tab[] table */
-
- /* Allocate space for two buffer descriptors in the DP ram.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- /* allocate size of struct serialbuffer with bd rx/tx,
- * buffer rx/tx and rx index
- */
- dpaddr = m8260_cpm_dpalloc((sizeof(serialbuffer_t)), 16);
-
- rtx = (serialbuffer_t *)&im->im_dprambase[dpaddr];
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf;
- rtx->rxbd.cbd_sc = 0;
-
- rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf;
- rtx->txbd.cbd_sc = 0;
-
- /* Set up the uart parameters in the parameter ram. */
- up->smc_rbase = dpaddr;
- up->smc_tbase = dpaddr+sizeof(cbd_t);
- up->smc_rfcr = CPMFCR_EB;
- up->smc_tfcr = CPMFCR_EB;
- up->smc_brklen = 0;
- up->smc_brkec = 0;
- up->smc_brkcr = 0;
-
- /* Set UART mode, 8 bit, no parity, one stop.
- * Enable receive and transmit.
- */
- sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
-
- /* Mask all interrupts and remove anything pending. */
- sp->smc_smcm = 0;
- sp->smc_smce = 0xff;
-
- /* put the SMC channel into NMSI (non multiplexd serial interface)
- * mode and wire either BRG7 to SMC1 or BRG8 to SMC2 (15-17).
- */
- im->im_cpmux.cmx_smr = (im->im_cpmux.cmx_smr&~CMXSMR_MASK)|CMXSMR_VALUE;
-
- /* Set up the baud rate generator. */
- serial_setbrg ();
-
- /* Make the first buffer the only buffer. */
- rtx->txbd.cbd_sc |= BD_SC_WRAP;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* single/multi character receive. */
- up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN;
- up->smc_maxidl = CONFIG_SYS_MAXIDLE;
- rtx->rxindex = 0;
-
- /* Initialize Tx/Rx parameters. */
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_SMC_PAGE, CPM_CR_SMC_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver. */
- sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
- return (0);
-}
-
-static void mpc8260_smc_serial_setbrg(void)
-{
-#if defined(CONFIG_CONS_USE_EXTC)
- m8260_cpm_extcbrg(brg_map[SMC_INDEX], gd->baudrate,
- CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
-#else
- m8260_cpm_setbrg(brg_map[SMC_INDEX], gd->baudrate);
-#endif
-}
-
-static void mpc8260_smc_serial_putc(const char c)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile serialbuffer_t *rtx;
-
- if (c == '\n')
- serial_putc ('\r');
-
- up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
-
- rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
-
- /* Wait for last character to go. */
- while (rtx->txbd.cbd_sc & BD_SC_READY & BD_SC_READY)
- ;
- rtx->txbuf = c;
- rtx->txbd.cbd_datlen = 1;
- rtx->txbd.cbd_sc |= BD_SC_READY;
-}
-
-static int mpc8260_smc_serial_getc(void)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile serialbuffer_t *rtx;
- unsigned char c;
-
- up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
-
- rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
-
- /* Wait for character to show up. */
- while (rtx->rxbd.cbd_sc & BD_SC_EMPTY)
- ;
-
- /* the characters are read one by one,
- * use the rxindex to know the next char to deliver
- */
- c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr + rtx->rxindex);
- rtx->rxindex++;
-
- /* check if all char are readout, then make prepare for next receive */
- if (rtx->rxindex >= rtx->rxbd.cbd_datlen) {
- rtx->rxindex = 0;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY;
- }
- return(c);
-}
-
-static int mpc8260_smc_serial_tstc(void)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile serialbuffer_t *rtx;
-
- up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
- rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
-
- return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY);
-}
-
-static struct serial_device mpc8260_smc_serial_drv = {
- .name = "mpc8260_smc_uart",
- .start = mpc8260_smc_serial_init,
- .stop = NULL,
- .setbrg = mpc8260_smc_serial_setbrg,
- .putc = mpc8260_smc_serial_putc,
- .puts = default_serial_puts,
- .getc = mpc8260_smc_serial_getc,
- .tstc = mpc8260_smc_serial_tstc,
-};
-
-void mpc8260_smc_serial_initialize(void)
-{
- serial_register(&mpc8260_smc_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &mpc8260_smc_serial_drv;
-}
-#endif /* CONFIG_CONS_ON_SMC */
-
-#if defined(CONFIG_KGDB_ON_SMC)
-
-#if defined(CONFIG_CONS_ON_SMC) && CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX
-#error Whoops! serial console and kgdb are on the same smc serial port
-#endif
-
-#if CONFIG_KGDB_INDEX == 1 /* KGDB Port on SMC1 */
-
-#define KGDB_SMC_INDEX 0
-#define KGDB_PROFF_SMC_BASE PROFF_SMC1_BASE
-#define KGDB_PROFF_SMC PROFF_SMC1
-#define KGDB_CPM_CR_SMC_PAGE CPM_CR_SMC1_PAGE
-#define KGDB_CPM_CR_SMC_SBLOCK CPM_CR_SMC1_SBLOCK
-#define KGDB_CMXSMR_MASK (CMXSMR_SMC1|CMXSMR_SMC1CS_MSK)
-#define KGDB_CMXSMR_VALUE CMXSMR_SMC1CS_BRG7
-
-#elif CONFIG_KGDB_INDEX == 2 /* KGDB Port on SMC2 */
-
-#define KGDB_SMC_INDEX 1
-#define KGDB_PROFF_SMC_BASE PROFF_SMC2_BASE
-#define KGDB_PROFF_SMC PROFF_SMC2
-#define KGDB_CPM_CR_SMC_PAGE CPM_CR_SMC2_PAGE
-#define KGDB_CPM_CR_SMC_SBLOCK CPM_CR_SMC2_SBLOCK
-#define KGDB_CMXSMR_MASK (CMXSMR_SMC2|CMXSMR_SMC2CS_MSK)
-#define KGDB_CMXSMR_VALUE CMXSMR_SMC2CS_BRG8
-
-#else
-
-#error "console not correctly defined"
-
-#endif
-
-void
-kgdb_serial_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile smc_t *sp;
- volatile smc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile cpm8260_t *cp = &(im->im_cpm);
- uint dpaddr, speed = CONFIG_KGDB_BAUDRATE;
- char *s, *e;
-
- if ((s = getenv("kgdbrate")) != NULL && *s != '\0') {
- ulong rate = simple_strtoul(s, &e, 10);
- if (e > s && *e == '\0')
- speed = rate;
- }
-
- /* initialize pointers to SMC */
-
- sp = (smc_t *) &(im->im_smc[KGDB_SMC_INDEX]);
- im->im_dprambase16[KGDB_PROFF_SMC_BASE / sizeof(u16)] = KGDB_PROFF_SMC;
- up = (smc_uart_t *)&im->im_dprambase[KGDB_PROFF_SMC];
-
- /* Disable transmitter/receiver. */
- sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
- /* NOTE: I/O port pins are set up via the iop_conf_tab[] table */
-
- /* Allocate space for two buffer descriptors in the DP ram.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- rbdf = (cbd_t *)&im->im_dprambase[dpaddr];
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = 0;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = 0;
-
- /* Set up the uart parameters in the parameter ram. */
- up->smc_rbase = dpaddr;
- up->smc_tbase = dpaddr+sizeof(cbd_t);
- up->smc_rfcr = CPMFCR_EB;
- up->smc_tfcr = CPMFCR_EB;
- up->smc_brklen = 0;
- up->smc_brkec = 0;
- up->smc_brkcr = 0;
-
- /* Set UART mode, 8 bit, no parity, one stop.
- * Enable receive and transmit.
- */
- sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
-
- /* Mask all interrupts and remove anything pending. */
- sp->smc_smcm = 0;
- sp->smc_smce = 0xff;
-
- /* put the SMC channel into NMSI (non multiplexd serial interface)
- * mode and wire either BRG7 to SMC1 or BRG8 to SMC2 (15-17).
- */
- im->im_cpmux.cmx_smr =
- (im->im_cpmux.cmx_smr & ~KGDB_CMXSMR_MASK) | KGDB_CMXSMR_VALUE;
-
- /* Set up the baud rate generator. */
-#if defined(CONFIG_KGDB_USE_EXTC)
- m8260_cpm_extcbrg(brg_map[KGDB_SMC_INDEX], speed,
- CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL);
-#else
- m8260_cpm_setbrg(brg_map[KGDB_SMC_INDEX], speed);
-#endif
-
- /* Make the first buffer the only buffer. */
- tbdf->cbd_sc |= BD_SC_WRAP;
- rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* Single character receive. */
- up->smc_mrblr = 1;
- up->smc_maxidl = 0;
-
- /* Initialize Tx/Rx parameters. */
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(KGDB_CPM_CR_SMC_PAGE, KGDB_CPM_CR_SMC_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver. */
- sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
- printf("SMC%d at %dbps ", CONFIG_KGDB_INDEX, speed);
-}
-
-void
-putDebugChar(const char c)
-{
- volatile cbd_t *tbdf;
- volatile char *buf;
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-
- if (c == '\n')
- putDebugChar ('\r');
-
- up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]);
-
- tbdf = (cbd_t *)&im->im_dprambase[up->smc_tbase];
-
- /* Wait for last character to go. */
- buf = (char *)tbdf->cbd_bufaddr;
- while (tbdf->cbd_sc & BD_SC_READY)
- ;
-
- *buf = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
-}
-
-void
-putDebugStr (const char *s)
-{
- while (*s) {
- putDebugChar (*s++);
- }
-}
-
-int
-getDebugChar(void)
-{
- volatile cbd_t *rbdf;
- volatile unsigned char *buf;
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- unsigned char c;
-
- up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]);
-
- rbdf = (cbd_t *)&im->im_dprambase[up->smc_rbase];
-
- /* Wait for character to show up. */
- buf = (unsigned char *)rbdf->cbd_bufaddr;
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- ;
- c = *buf;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return(c);
-}
-
-void
-kgdb_interruptible(int yes)
-{
- return;
-}
-
-#endif /* CONFIG_KGDB_ON_SMC */
projects / oweals / u-boot.git / blobdiff