config TARGET_QEMU_MIPS
bool "Support qemu-mips"
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SUPPORTS_CPU_MIPS64_R1
select SUPPORTS_CPU_MIPS64_R2
- select ROM_EXCEPTION_VECTORS
+ select SUPPORTS_LITTLE_ENDIAN
config TARGET_MALTA
bool "Support malta"
select DM_SERIAL
select DYNAMIC_IO_PORT_BASE
select MIPS_CM
+ select MIPS_INSERT_BOOT_CONFIG
+ select MIPS_L1_CACHE_SHIFT_6
select MIPS_L2_CACHE
select OF_CONTROL
select OF_ISA_BUS
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SUPPORTS_CPU_MIPS32_R6
select SUPPORTS_CPU_MIPS64_R1
select SUPPORTS_CPU_MIPS64_R2
select SUPPORTS_CPU_MIPS64_R6
+ select SUPPORTS_LITTLE_ENDIAN
select SWAP_IO_SPACE
- select MIPS_L1_CACHE_SHIFT_6
- select ROM_EXCEPTION_VECTORS
+ imply CMD_DM
config TARGET_VCT
bool "Support vct"
- select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_CPU_MIPS32_R1
- select SUPPORTS_CPU_MIPS32_R2
- select SYS_MIPS_CACHE_INIT_RAM_LOAD
select ROM_EXCEPTION_VECTORS
-
-config TARGET_DBAU1X00
- bool "Support dbau1x00"
select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_LITTLE_ENDIAN
- select SUPPORTS_CPU_MIPS32_R1
- select SUPPORTS_CPU_MIPS32_R2
- select SYS_MIPS_CACHE_INIT_RAM_LOAD
- select ROM_EXCEPTION_VECTORS
- select MIPS_TUNE_4KC
-
-config TARGET_PB1X00
- bool "Support pb1x00"
- select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SYS_MIPS_CACHE_INIT_RAM_LOAD
- select ROM_EXCEPTION_VECTORS
- select MIPS_TUNE_4KC
config ARCH_ATH79
bool "Support QCA/Atheros ath79"
+ select DM
+ select OF_CONTROL
+ imply CMD_DM
+
+config ARCH_MSCC
+ bool "Support MSCC VCore-III"
select OF_CONTROL
select DM
config ARCH_BMIPS
bool "Support BMIPS SoCs"
- select OF_CONTROL
- select DM
select CLK
select CPU
+ select DM
+ select OF_CONTROL
select RAM
select SYSRESET
+ imply CMD_DM
+
+config ARCH_MTMIPS
+ bool "Support MediaTek MIPS platforms"
+ imply CMD_DM
+ select DISPLAY_CPUINFO
+ select DM
+ imply DM_ETH
+ imply DM_GPIO
+ select DM_SERIAL
+ imply DM_SPI
+ imply DM_SPI_FLASH
+ select ARCH_MISC_INIT
+ select MIPS_TUNE_24KC
+ select OF_CONTROL
+ select ROM_EXCEPTION_VECTORS
+ select SUPPORTS_CPU_MIPS32_R1
+ select SUPPORTS_CPU_MIPS32_R2
+ select SUPPORTS_LITTLE_ENDIAN
+ select SYSRESET
+
+config ARCH_JZ47XX
+ bool "Support Ingenic JZ47xx"
+ select SUPPORT_SPL
+ select OF_CONTROL
+ select DM
config MACH_PIC32
bool "Support Microchip PIC32"
- select OF_CONTROL
select DM
+ select OF_CONTROL
+ imply CMD_DM
config TARGET_BOSTON
bool "Support Boston"
select DM
select DM_SERIAL
- select OF_CONTROL
select MIPS_CM
select MIPS_L1_CACHE_SHIFT_6
select MIPS_L2_CACHE
+ select OF_BOARD_SETUP
+ select OF_CONTROL
+ select ROM_EXCEPTION_VECTORS
select SUPPORTS_BIG_ENDIAN
- select SUPPORTS_LITTLE_ENDIAN
select SUPPORTS_CPU_MIPS32_R1
select SUPPORTS_CPU_MIPS32_R2
select SUPPORTS_CPU_MIPS32_R6
select SUPPORTS_CPU_MIPS64_R1
select SUPPORTS_CPU_MIPS64_R2
select SUPPORTS_CPU_MIPS64_R6
- select ROM_EXCEPTION_VECTORS
+ select SUPPORTS_LITTLE_ENDIAN
+ imply CMD_DM
config TARGET_XILFPGA
bool "Support Imagination Xilfpga"
- select OF_CONTROL
select DM
- select DM_SERIAL
- select DM_GPIO
select DM_ETH
- select SUPPORTS_LITTLE_ENDIAN
- select SUPPORTS_CPU_MIPS32_R1
- select SUPPORTS_CPU_MIPS32_R2
+ select DM_GPIO
+ select DM_SERIAL
select MIPS_L1_CACHE_SHIFT_4
+ select OF_CONTROL
select ROM_EXCEPTION_VECTORS
+ select SUPPORTS_CPU_MIPS32_R1
+ select SUPPORTS_CPU_MIPS32_R2
+ select SUPPORTS_LITTLE_ENDIAN
+ imply CMD_DM
help
This supports IMGTEC MIPSfpga platform
endchoice
-source "board/dbau1x00/Kconfig"
source "board/imgtec/boston/Kconfig"
source "board/imgtec/malta/Kconfig"
source "board/imgtec/xilfpga/Kconfig"
source "board/micronas/vct/Kconfig"
-source "board/pb1x00/Kconfig"
source "board/qemu-mips/Kconfig"
source "arch/mips/mach-ath79/Kconfig"
+source "arch/mips/mach-mscc/Kconfig"
source "arch/mips/mach-bmips/Kconfig"
+source "arch/mips/mach-jz47xx/Kconfig"
source "arch/mips/mach-pic32/Kconfig"
+source "arch/mips/mach-mtmips/Kconfig"
if MIPS
the GCRs occupy a region of the physical address space which is
otherwise unused, or at minimum that software doesn't need to access.
+config MIPS_CACHE_INDEX_BASE
+ hex "Index base address for cache initialisation"
+ default 0x80000000 if CPU_MIPS32
+ default 0xffffffff80000000 if CPU_MIPS64
+ help
+ This is the base address for a memory block, which is used for
+ initialising the cache lines. This is also the base address of a memory
+ block which is used for loading and filling cache lines when
+ SYS_MIPS_CACHE_INIT_RAM_LOAD is selected.
+ Normally this is CKSEG0. If the MIPS system needs to move this block
+ to some SRAM or ScratchPad RAM, adapt this option accordingly.
+
+config MIPS_RELOCATION_TABLE_SIZE
+ hex "Relocation table size"
+ range 0x100 0x10000
+ default "0x8000"
+ ---help---
+ A table of relocation data will be appended to the U-Boot binary
+ and parsed in relocate_code() to fix up all offsets in the relocated
+ U-Boot.
+
+ This option allows the amount of space reserved for the table to be
+ adjusted in a range from 256 up to 64k. The default is 32k and should
+ be ok in most cases. Reduce this value to shrink the size of U-Boot
+ binary.
+
+ The build will fail and a valid size suggested if this is too small.
+
+ If unsure, leave at the default value.
+
endmenu
menu "OS boot interface"
wish U-Boot to configure it or make use of it to retrieve system
information such as cache configuration.
+config MIPS_INSERT_BOOT_CONFIG
+ bool
+ default n
+ help
+ Enable this to insert some board-specific boot configuration in
+ the U-Boot binary at offset 0x10.
+
+config MIPS_BOOT_CONFIG_WORD0
+ hex
+ depends on MIPS_INSERT_BOOT_CONFIG
+ default 0x420 if TARGET_MALTA
+ default 0x0
+ help
+ Value which is inserted as boot config word 0.
+
+config MIPS_BOOT_CONFIG_WORD1
+ hex
+ depends on MIPS_INSERT_BOOT_CONFIG
+ default 0x0
+ help
+ Value which is inserted as boot config word 1.
+
endif
endmenu
projects / oweals / u-boot.git / blobdiff