#include <version.h>
#include <watchdog.h>
#include <stdio_dev.h>
+#include <serial.h>
#include <net.h>
+#include <linux/compiler.h>
#include <asm/processor.h>
+#include <asm/microblaze_intc.h>
+#include <fdtdec.h>
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_SYS_GPIO_0
-extern int gpio_init (void);
-#endif
-#ifdef CONFIG_SYS_INTC_0
-extern int interrupts_init (void);
-#endif
-
-#if defined(CONFIG_CMD_NET)
-extern int eth_init (bd_t * bis);
-#endif
-#ifdef CONFIG_SYS_TIMER_0
-extern int timer_init (void);
-#endif
-#ifdef CONFIG_SYS_FSL_2
-extern void fsl_init2 (void);
-#endif
-
/*
* All attempts to come up with a "common" initialization sequence
* that works for all boards and architectures failed: some of the
init_fnc_t *init_sequence[] = {
env_init,
+#ifdef CONFIG_OF_CONTROL
+ fdtdec_check_fdt,
+#endif
serial_init,
console_init_f,
-#ifdef CONFIG_SYS_GPIO_0
- gpio_init,
-#endif
-#ifdef CONFIG_SYS_INTC_0
interrupts_init,
-#endif
-#ifdef CONFIG_SYS_TIMER_0
timer_init,
-#endif
-#ifdef CONFIG_SYS_FSL_2
- fsl_init2,
-#endif
NULL,
};
unsigned long monitor_flash_len;
-void board_init (void)
+void board_init_f(ulong not_used)
{
bd_t *bd;
init_fnc_t **init_fnc_ptr;
gd = (gd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET);
bd = (bd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \
- GENERATED_BD_INFO_SIZE);
- char *s;
+ __maybe_unused char *s;
#if defined(CONFIG_CMD_FLASH)
ulong flash_size = 0;
#endif
monitor_flash_len = __end - __text_start;
+#ifdef CONFIG_OF_EMBED
+ /* Get a pointer to the FDT */
+ gd->fdt_blob = _binary_dt_dtb_start;
+#elif defined CONFIG_OF_SEPARATE
+ /* FDT is at end of image */
+ gd->fdt_blob = (void *)__end;
+#endif
+ /* Allow the early environment to override the fdt address */
+ gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
+ (uintptr_t)gd->fdt_blob);
+
/*
* The Malloc area is immediately below the monitor copy in DRAM
* aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off
*/
mem_malloc_init (CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
+#ifdef CONFIG_SERIAL_MULTI
+ serial_initialize();
+#endif
+
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
WATCHDOG_RESET ();
if ((*init_fnc_ptr) () != 0) {
}
}
+#ifdef CONFIG_OF_CONTROL
+ /* For now, put this check after the console is ready */
+ if (fdtdec_prepare_fdt()) {
+ panic("** CONFIG_OF_CONTROL defined but no FDT - please see "
+ "doc/README.fdt-control");
+ } else
+ printf("DTB: 0x%x\n", (u32)gd->fdt_blob);
+#endif
+
puts ("SDRAM :\n");
printf ("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF");
printf ("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF");
#if defined(CONFIG_CMD_FLASH)
puts ("Flash: ");
bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
- if (0 < (flash_size = flash_init ())) {
- bd->bi_flashsize = flash_size;
- bd->bi_flashoffset = CONFIG_SYS_FLASH_BASE + flash_size;
+ flash_size = flash_init();
+ if (bd->bi_flashstart && flash_size > 0) {
# ifdef CONFIG_SYS_FLASH_CHECKSUM
print_size (flash_size, "");
/*
s = getenv ("flashchecksum");
if (s && (*s == 'y')) {
printf (" CRC: %08X",
- crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
+ crc32(0, (const u8 *)bd->bi_flashstart,
+ flash_size)
);
}
putc ('\n');
# else /* !CONFIG_SYS_FLASH_CHECKSUM */
print_size (flash_size, "\n");
# endif /* CONFIG_SYS_FLASH_CHECKSUM */
+ bd->bi_flashsize = flash_size;
+ bd->bi_flashoffset = bd->bi_flashstart + flash_size;
} else {
puts ("Flash init FAILED");
bd->bi_flashstart = 0;
/* Initialize the console (after the relocation and devices init) */
console_init_r();
- if ((s = getenv ("loadaddr")) != NULL) {
- load_addr = simple_strtoul (s, NULL, 16);
- }
+ board_init();
-#if defined(CONFIG_CMD_NET)
- /* IP Address */
- bd->bi_ip_addr = getenv_IPaddr("ipaddr");
+ /* Initialize from environment */
+ load_addr = getenv_ulong("loadaddr", 16, load_addr);
+#if defined(CONFIG_CMD_NET)
printf("Net: ");
eth_initialize(gd->bd);
uchar enetaddr[6];
eth_getenv_enetaddr("ethaddr", enetaddr);
printf("MAC: %pM\n", enetaddr);
-
- s = getenv("bootfile");
- if (s != NULL)
- copy_filename(BootFile, s, sizeof(BootFile));
#endif
/* main_loop */