#ifndef __BFIN_DEF_ADSP_BF526_proc__
#define __BFIN_DEF_ADSP_BF526_proc__
-#include "../mach-common/ADSP-EDN-core_def.h"
+#include "BF524_def.h"
-#include "ADSP-EDN-BF52x-extended_def.h"
-
-#define PLL_CTL 0xFFC00000 /* PLL Control Register */
-#define PLL_DIV 0xFFC00004 /* PLL Divide Register */
-#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */
-#define PLL_STAT 0xFFC0000C /* PLL Status Register */
-#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */
-#define CHIPID 0xFFC00014
-#define SWRST 0xFFC00100 /* Software Reset Register */
-#define SYSCR 0xFFC00104 /* System Configuration register */
#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */
#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */
#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */
#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */
#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */
-#define USB_FADDR 0xFFC03800 /* Function address register */
-#define USB_POWER 0xFFC03804 /* Power management register */
-#define USB_INTRTX 0xFFC03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
-#define USB_INTRRX 0xFFC0380C /* Interrupt register for Rx endpoints 1 to 7 */
-#define USB_INTRTXE 0xFFC03810 /* Interrupt enable register for IntrTx */
-#define USB_INTRRXE 0xFFC03814 /* Interrupt enable register for IntrRx */
-#define USB_INTRUSB 0xFFC03818 /* Interrupt register for common USB interrupts */
-#define USB_INTRUSBE 0xFFC0381C /* Interrupt enable register for IntrUSB */
-#define USB_FRAME 0xFFC03820 /* USB frame number */
-#define USB_INDEX 0xFFC03824 /* Index register for selecting the indexed endpoint registers */
-#define USB_TESTMODE 0xFFC03828 /* Enabled USB 20 test modes */
-#define USB_GLOBINTR 0xFFC0382C /* Global Interrupt Mask register and Wakeup Exception Interrupt */
-#define USB_GLOBAL_CTL 0xFFC03830 /* Global Clock Control for the core */
-#define USB_TX_MAX_PACKET 0xFFC03840 /* Maximum packet size for Host Tx endpoint */
-#define USB_CSR0 0xFFC03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_TXCSR 0xFFC03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_RX_MAX_PACKET 0xFFC03848 /* Maximum packet size for Host Rx endpoint */
-#define USB_RXCSR 0xFFC0384C /* Control Status register for Host Rx endpoint */
-#define USB_COUNT0 0xFFC03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_RXCOUNT 0xFFC03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_TXTYPE 0xFFC03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
-#define USB_NAKLIMIT0 0xFFC03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_TXINTERVAL 0xFFC03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_RXTYPE 0xFFC0385C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
-#define USB_RXINTERVAL 0xFFC03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
-#define USB_TXCOUNT 0xFFC03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */
-#define USB_EP0_FIFO 0xFFC03880 /* Endpoint 0 FIFO */
-#define USB_EP1_FIFO 0xFFC03888 /* Endpoint 1 FIFO */
-#define USB_EP2_FIFO 0xFFC03890 /* Endpoint 2 FIFO */
-#define USB_EP3_FIFO 0xFFC03898 /* Endpoint 3 FIFO */
-#define USB_EP4_FIFO 0xFFC038A0 /* Endpoint 4 FIFO */
-#define USB_EP5_FIFO 0xFFC038A8 /* Endpoint 5 FIFO */
-#define USB_EP6_FIFO 0xFFC038B0 /* Endpoint 6 FIFO */
-#define USB_EP7_FIFO 0xFFC038B8 /* Endpoint 7 FIFO */
-#define USB_OTG_DEV_CTL 0xFFC03900 /* OTG Device Control Register */
-#define USB_OTG_VBUS_IRQ 0xFFC03904 /* OTG VBUS Control Interrupts */
-#define USB_OTG_VBUS_MASK 0xFFC03908 /* VBUS Control Interrupt Enable */
-#define USB_LINKINFO 0xFFC03948 /* Enables programming of some PHY-side delays */
-#define USB_VPLEN 0xFFC0394C /* Determines duration of VBUS pulse for VBUS charging */
-#define USB_HS_EOF1 0xFFC03950 /* Time buffer for High-Speed transactions */
-#define USB_FS_EOF1 0xFFC03954 /* Time buffer for Full-Speed transactions */
-#define USB_LS_EOF1 0xFFC03958 /* Time buffer for Low-Speed transactions */
-#define USB_APHY_CNTRL 0xFFC039E0 /* Register that increases visibility of Analog PHY */
-#define USB_APHY_CALIB 0xFFC039E4 /* Register used to set some calibration values */
-#define USB_APHY_CNTRL2 0xFFC039E8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
-#define USB_PHY_TEST 0xFFC039EC /* Used for reducing simulation time and simplifies FIFO testability */
-#define USB_PLLOSC_CTRL 0xFFC039F0 /* Used to program different parameters for USB PLL and Oscillator */
-#define USB_SRP_CLKDIV 0xFFC039F4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
-#define USB_EP_NI0_TXMAXP 0xFFC03A00 /* Maximum packet size for Host Tx endpoint0 */
-#define USB_EP_NI0_TXCSR 0xFFC03A04 /* Control Status register for endpoint 0 */
-#define USB_EP_NI0_RXMAXP 0xFFC03A08 /* Maximum packet size for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCSR 0xFFC03A0C /* Control Status register for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCOUNT 0xFFC03A10 /* Number of bytes received in endpoint 0 FIFO */
-#define USB_EP_NI0_TXTYPE 0xFFC03A14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
-#define USB_EP_NI0_TXINTERVAL 0xFFC03A18 /* Sets the NAK response timeout on Endpoint 0 */
-#define USB_EP_NI0_RXTYPE 0xFFC03A1C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
-#define USB_EP_NI0_RXINTERVAL 0xFFC03A20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
-#define USB_EP_NI0_TXCOUNT 0xFFC03A28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
-#define USB_EP_NI1_TXMAXP 0xFFC03A40 /* Maximum packet size for Host Tx endpoint1 */
-#define USB_EP_NI1_TXCSR 0xFFC03A44 /* Control Status register for endpoint1 */
-#define USB_EP_NI1_RXMAXP 0xFFC03A48 /* Maximum packet size for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCSR 0xFFC03A4C /* Control Status register for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCOUNT 0xFFC03A50 /* Number of bytes received in endpoint1 FIFO */
-#define USB_EP_NI1_TXTYPE 0xFFC03A54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
-#define USB_EP_NI1_TXINTERVAL 0xFFC03A58 /* Sets the NAK response timeout on Endpoint1 */
-#define USB_EP_NI1_RXTYPE 0xFFC03A5C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
-#define USB_EP_NI1_RXINTERVAL 0xFFC03A60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
-#define USB_EP_NI1_TXCOUNT 0xFFC03A68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
-#define USB_EP_NI2_TXMAXP 0xFFC03A80 /* Maximum packet size for Host Tx endpoint2 */
-#define USB_EP_NI2_TXCSR 0xFFC03A84 /* Control Status register for endpoint2 */
-#define USB_EP_NI2_RXMAXP 0xFFC03A88 /* Maximum packet size for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCSR 0xFFC03A8C /* Control Status register for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCOUNT 0xFFC03A90 /* Number of bytes received in endpoint2 FIFO */
-#define USB_EP_NI2_TXTYPE 0xFFC03A94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
-#define USB_EP_NI2_TXINTERVAL 0xFFC03A98 /* Sets the NAK response timeout on Endpoint2 */
-#define USB_EP_NI2_RXTYPE 0xFFC03A9C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
-#define USB_EP_NI2_RXINTERVAL 0xFFC03AA0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
-#define USB_EP_NI2_TXCOUNT 0xFFC03AA8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
-#define USB_EP_NI3_TXMAXP 0xFFC03AC0 /* Maximum packet size for Host Tx endpoint3 */
-#define USB_EP_NI3_TXCSR 0xFFC03AC4 /* Control Status register for endpoint3 */
-#define USB_EP_NI3_RXMAXP 0xFFC03AC8 /* Maximum packet size for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCSR 0xFFC03ACC /* Control Status register for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCOUNT 0xFFC03AD0 /* Number of bytes received in endpoint3 FIFO */
-#define USB_EP_NI3_TXTYPE 0xFFC03AD4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
-#define USB_EP_NI3_TXINTERVAL 0xFFC03AD8 /* Sets the NAK response timeout on Endpoint3 */
-#define USB_EP_NI3_RXTYPE 0xFFC03ADC /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
-#define USB_EP_NI3_RXINTERVAL 0xFFC03AE0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
-#define USB_EP_NI3_TXCOUNT 0xFFC03AE8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
-#define USB_EP_NI4_TXMAXP 0xFFC03B00 /* Maximum packet size for Host Tx endpoint4 */
-#define USB_EP_NI4_TXCSR 0xFFC03B04 /* Control Status register for endpoint4 */
-#define USB_EP_NI4_RXMAXP 0xFFC03B08 /* Maximum packet size for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCSR 0xFFC03B0C /* Control Status register for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCOUNT 0xFFC03B10 /* Number of bytes received in endpoint4 FIFO */
-#define USB_EP_NI4_TXTYPE 0xFFC03B14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
-#define USB_EP_NI4_TXINTERVAL 0xFFC03B18 /* Sets the NAK response timeout on Endpoint4 */
-#define USB_EP_NI4_RXTYPE 0xFFC03B1C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
-#define USB_EP_NI4_RXINTERVAL 0xFFC03B20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
-#define USB_EP_NI4_TXCOUNT 0xFFC03B28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
-#define USB_EP_NI5_TXMAXP 0xFFC03B40 /* Maximum packet size for Host Tx endpoint5 */
-#define USB_EP_NI5_TXCSR 0xFFC03B44 /* Control Status register for endpoint5 */
-#define USB_EP_NI5_RXMAXP 0xFFC03B48 /* Maximum packet size for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCSR 0xFFC03B4C /* Control Status register for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCOUNT 0xFFC03B50 /* Number of bytes received in endpoint5 FIFO */
-#define USB_EP_NI5_TXTYPE 0xFFC03B54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
-#define USB_EP_NI5_TXINTERVAL 0xFFC03B58 /* Sets the NAK response timeout on Endpoint5 */
-#define USB_EP_NI5_RXTYPE 0xFFC03B5C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
-#define USB_EP_NI5_RXINTERVAL 0xFFC03B60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
-#define USB_EP_NI5_TXCOUNT 0xFFC03B68 /* Number of bytes to be written to the endpoint5 Tx FIFO */
-#define USB_EP_NI6_TXMAXP 0xFFC03B80 /* Maximum packet size for Host Tx endpoint6 */
-#define USB_EP_NI6_TXCSR 0xFFC03B84 /* Control Status register for endpoint6 */
-#define USB_EP_NI6_RXMAXP 0xFFC03B88 /* Maximum packet size for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCSR 0xFFC03B8C /* Control Status register for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCOUNT 0xFFC03B90 /* Number of bytes received in endpoint6 FIFO */
-#define USB_EP_NI6_TXTYPE 0xFFC03B94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
-#define USB_EP_NI6_TXINTERVAL 0xFFC03B98 /* Sets the NAK response timeout on Endpoint6 */
-#define USB_EP_NI6_RXTYPE 0xFFC03B9C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
-#define USB_EP_NI6_RXINTERVAL 0xFFC03BA0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
-#define USB_EP_NI6_TXCOUNT 0xFFC03BA8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
-#define USB_EP_NI7_TXMAXP 0xFFC03BC0 /* Maximum packet size for Host Tx endpoint7 */
-#define USB_EP_NI7_TXCSR 0xFFC03BC4 /* Control Status register for endpoint7 */
-#define USB_EP_NI7_RXMAXP 0xFFC03BC8 /* Maximum packet size for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCSR 0xFFC03BCC /* Control Status register for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCOUNT 0xFFC03BD0 /* Number of bytes received in endpoint7 FIFO */
-#define USB_EP_NI7_TXTYPE 0xFFC03BD4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
-#define USB_EP_NI7_TXINTERVAL 0xFFC03BD8 /* Sets the NAK response timeout on Endpoint7 */
-#define USB_EP_NI7_RXTYPE 0xFFC03BDC /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define USB_EP_NI7_RXINTERVAL 0xFFC03BF0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define USB_EP_NI7_TXCOUNT 0xFFC03BF8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
-#define USB_DMA_INTERRUPT 0xFFC03C00 /* Indicates pending interrupts for the DMA channels */
-#define USB_DMA0_CONTROL 0xFFC03C04 /* DMA master channel 0 configuration */
-#define USB_DMA0_ADDRLOW 0xFFC03C08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0_ADDRHIGH 0xFFC03C0C /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0_COUNTLOW 0xFFC03C10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
-#define USB_DMA0_COUNTHIGH 0xFFC03C14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
-#define USB_DMA1_CONTROL 0xFFC03C24 /* DMA master channel 1 configuration */
-#define USB_DMA1_ADDRLOW 0xFFC03C28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1_ADDRHIGH 0xFFC03C2C /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1_COUNTLOW 0xFFC03C30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
-#define USB_DMA1_COUNTHIGH 0xFFC03C34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
-#define USB_DMA2_CONTROL 0xFFC03C44 /* DMA master channel 2 configuration */
-#define USB_DMA2_ADDRLOW 0xFFC03C48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2_ADDRHIGH 0xFFC03C4C /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2_COUNTLOW 0xFFC03C50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
-#define USB_DMA2_COUNTHIGH 0xFFC03C54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
-#define USB_DMA3_CONTROL 0xFFC03C64 /* DMA master channel 3 configuration */
-#define USB_DMA3_ADDRLOW 0xFFC03C68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3_ADDRHIGH 0xFFC03C6C /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3_COUNTLOW 0xFFC03C70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
-#define USB_DMA3_COUNTHIGH 0xFFC03C74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
-#define USB_DMA4_CONTROL 0xFFC03C84 /* DMA master channel 4 configuration */
-#define USB_DMA4_ADDRLOW 0xFFC03C88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4_ADDRHIGH 0xFFC03C8C /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4_COUNTLOW 0xFFC03C90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
-#define USB_DMA4_COUNTHIGH 0xFFC03C94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
-#define USB_DMA5_CONTROL 0xFFC03CA4 /* DMA master channel 5 configuration */
-#define USB_DMA5_ADDRLOW 0xFFC03CA8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5_ADDRHIGH 0xFFC03CAC /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5_COUNTLOW 0xFFC03CB0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
-#define USB_DMA5_COUNTHIGH 0xFFC03CB4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
-#define USB_DMA6_CONTROL 0xFFC03CC4 /* DMA master channel 6 configuration */
-#define USB_DMA6_ADDRLOW 0xFFC03CC8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6_ADDRHIGH 0xFFC03CCC /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6_COUNTLOW 0xFFC03CD0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
-#define USB_DMA6_COUNTHIGH 0xFFC03CD4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
-#define USB_DMA7_CONTROL 0xFFC03CE4 /* DMA master channel 7 configuration */
-#define USB_DMA7_ADDRLOW 0xFFC03CE8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7_ADDRHIGH 0xFFC03CEC /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7_COUNTLOW 0xFFC03CF0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
-#define USB_DMA7_COUNTHIGH 0xFFC03CF4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
#endif /* __BFIN_DEF_ADSP_BF526_proc__ */
projects / oweals / u-boot.git / blobdiff