Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

[oweals/u-boot.git] / arch / arm / mach-tegra / Kconfig

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index f5b5ee9cb73fdb7d1b00677f3f6e36ba3c68e115..940257b5ecfbe724342440cb8e4c6d789da01fb0 100644 (file)
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -1,41 +1,146 @@
 if TEGRA
 
+config SPL_GPIO_SUPPORT
+       default y
+
+config SPL_LIBCOMMON_SUPPORT
+       default y
+
+config SPL_LIBGENERIC_SUPPORT
+       default y
+
+config SPL_SERIAL_SUPPORT
+       default y
+
+config TEGRA_IVC
+       bool "Tegra IVC protocol"
+       help
+         IVC (Inter-VM Communication) protocol is a Tegra-specific IPC
+         (Inter Processor Communication) framework. Within the context of
+         U-Boot, it is typically used for communication between the main CPU
+         and various auxiliary processors.
+
+config TEGRA_COMMON
+       bool "Tegra common options"
+       select CLK
+       select DM
+       select DM_ETH
+       select DM_GPIO
+       select DM_I2C
+       select DM_KEYBOARD
+       select DM_MMC
+       select DM_PWM
+       select DM_RESET
+       select DM_SERIAL
+       select DM_SPI
+       select DM_SPI_FLASH
+       select MISC
+       select OF_CONTROL
+       select VIDCONSOLE_AS_LCD if DM_VIDEO
+       select BOARD_EARLY_INIT_F
+
+config TEGRA_NO_BPMP
+       bool "Tegra common options for SoCs without BPMP"
+       select TEGRA_CAR
+       select TEGRA_CAR_CLOCK
+       select TEGRA_CAR_RESET
+
+config TEGRA_ARMV7_COMMON
+       bool "Tegra 32-bit common options"
+       select CPU_V7
+       select SPL
+       select SPL_BOARD_INIT if SPL
+       select SUPPORT_SPL
+       select TEGRA_COMMON
+       select TEGRA_GPIO
+       select TEGRA_NO_BPMP
+
+config TEGRA_ARMV8_COMMON
+       bool "Tegra 64-bit common options"
+       select ARM64
+       select TEGRA_COMMON
+
 choice
        prompt "Tegra SoC select"
        optional
 
 config TEGRA20
        bool "Tegra20 family"
+       select ARM_ERRATA_716044
+       select ARM_ERRATA_742230
+       select ARM_ERRATA_751472
+       select TEGRA_ARMV7_COMMON
 
 config TEGRA30
        bool "Tegra30 family"
+       select ARM_ERRATA_743622
+       select ARM_ERRATA_751472
+       select TEGRA_ARMV7_COMMON
 
 config TEGRA114
        bool "Tegra114 family"
+       select TEGRA_ARMV7_COMMON
 
 config TEGRA124
        bool "Tegra124 family"
+       select TEGRA_ARMV7_COMMON
 
-endchoice
+config TEGRA210
+       bool "Tegra210 family"
+       select TEGRA_GPIO
+       select TEGRA_ARMV8_COMMON
+       select TEGRA_NO_BPMP
 
-config SYS_MALLOC_F_LEN
-       default 0x1800
+config TEGRA186
+       bool "Tegra186 family"
+       select DM_MAILBOX
+       select TEGRA186_BPMP
+       select TEGRA186_CLOCK
+       select TEGRA186_GPIO
+       select TEGRA186_RESET
+       select TEGRA_ARMV8_COMMON
+       select TEGRA_HSP
+       select TEGRA_IVC
 
-config USE_PRIVATE_LIBGCC
-       default y
-
-config DM_USB
-       default y
+endchoice
 
-config SPL_DM
+config TEGRA_DISCONNECT_UDC_ON_BOOT
+       bool "Disconnect USB device mode controller on boot"
        default y
+       help
+         When loading U-Boot into RAM over USB protocols using tools such as
+         tegrarcm or L4T's exec-uboot.sh/tegraflash.py, Tegra's USB device
+         mode controller is initialized and enumerated by the host PC running
+         the tool. Unfortunately, these tools do not shut down the USB
+         controller before executing the downloaded code, and so the host PC
+         does not "de-enumerate" the USB device. This option shuts down the
+         USB controller when U-Boot boots to avoid leaving a stale USB device
+         present.
 
-config SPL_DISABLE_OF_CONTROL
-       default y
+config SYS_MALLOC_F_LEN
+       default 0x1800
 
 source "arch/arm/mach-tegra/tegra20/Kconfig"
 source "arch/arm/mach-tegra/tegra30/Kconfig"
 source "arch/arm/mach-tegra/tegra114/Kconfig"
 source "arch/arm/mach-tegra/tegra124/Kconfig"
+source "arch/arm/mach-tegra/tegra210/Kconfig"
+source "arch/arm/mach-tegra/tegra186/Kconfig"
+
+config CMD_ENTERRCM
+       bool "Enable 'enterrcm' command"
+       default y
+       help
+         Tegra's boot ROM supports a mode whereby code may be downloaded and
+         flash-programmed over a USB connection. On dev boards, this is
+         typically entered by holding down a "force recovery" button and
+         resetting the CPU. However, not all boards have such a button (one
+         example is the Compulab Trimslice), so a method to enter RCM from
+         software is useful.
+
+         Even on boards other than Trimslice, controlling this over a UART
+         may be useful, e.g. to allow simple remote control without the need
+         for mechanical button actuators, or hooking up relays/... to the
+         button.
 
 endif