armv8: lx2160a: add MMU table entries for PCIe

[oweals/u-boot.git] / arch / arm / mach-stm32mp / spl.c

diff --git a/arch/arm/mach-stm32mp/spl.c b/arch/arm/mach-stm32mp/spl.c
index 790973e8b6e9101bcfb9a10f896f36c68776c8cc..a3b0d6f38252a63a4e564e86e4adb1f6aaf52a2f 100644 (file)
--- a/arch/arm/mach-stm32mp/spl.c
+++ b/arch/arm/mach-stm32mp/spl.c
@@ -7,13 +7,14 @@
 #include <dm.h>
 #include <spl.h>
 #include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/libfdt.h>
 
 u32 spl_boot_device(void)
 {
        u32 boot_mode;
 
-       boot_mode = (readl(TAMP_BOOT_CONTEXT) & TAMP_BOOT_MODE_MASK) >>
-                   TAMP_BOOT_MODE_SHIFT;
+       boot_mode = get_bootmode();
 
        switch (boot_mode) {
        case BOOT_FLASH_SD_1:
@@ -22,6 +23,21 @@ u32 spl_boot_device(void)
        case BOOT_FLASH_SD_2:
        case BOOT_FLASH_EMMC_2:
                return BOOT_DEVICE_MMC2;
+       case BOOT_SERIAL_UART_1:
+       case BOOT_SERIAL_UART_2:
+       case BOOT_SERIAL_UART_3:
+       case BOOT_SERIAL_UART_4:
+       case BOOT_SERIAL_UART_5:
+       case BOOT_SERIAL_UART_6:
+       case BOOT_SERIAL_UART_7:
+       case BOOT_SERIAL_UART_8:
+               return BOOT_DEVICE_UART;
+       case BOOT_SERIAL_USB_OTG:
+               return BOOT_DEVICE_USB;
+       case BOOT_FLASH_NAND_FMC:
+               return BOOT_DEVICE_NAND;
+       case BOOT_FLASH_NOR_QSPI:
+               return BOOT_DEVICE_SPI;
        }
 
        return BOOT_DEVICE_MMC1;
@@ -44,6 +60,21 @@ int spl_boot_partition(const u32 boot_device)
        }
 }
 
+#ifdef CONFIG_SPL_DISPLAY_PRINT
+void spl_display_print(void)
+{
+       DECLARE_GLOBAL_DATA_PTR;
+       const char *model;
+
+       /* same code than show_board_info() but not compiled for SPL
+        * see CONFIG_DISPLAY_BOARDINFO & common/board_info.c
+        */
+       model = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
+       if (model)
+               printf("Model: %s\n", model);
+}
+#endif
+
 void board_init_f(ulong dummy)
 {
        struct udevice *dev;
@@ -80,7 +111,7 @@ void board_init_f(ulong dummy)
 
        ret = uclass_get_device(UCLASS_RAM, 0, &dev);
        if (ret) {
-               debug("DRAM init failed: %d\n", ret);
-               return;
+               printf("DRAM init failed: %d\n", ret);
+               hang();
        }
 }