arm: socfpga: misc: Add CONFIG_SYS_L2_PL310 switch

[oweals/u-boot.git] / arch / arm / mach-rockchip / rk3399-board-spl.c

diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c
index a13b717bbd003f5913af3082664297a2bdbf3145..d4e9a161a4fcdcf4415f4bd8d76ab799556d8203 100644 (file)
--- a/arch/arm/mach-rockchip/rk3399-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3399-board-spl.c
@@ -1,35 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2016 Rockchip Electronics Co., Ltd
- *
- * SPDX-License-Identifier:     GPL-2.0+
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
  */
 
 #include <common.h>
-#include <debug_uart.h>
-#include <dm.h>
-#include <fdtdec.h>
-#include <ram.h>
-#include <spl.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
+#include <asm/arch/bootrom.h>
 #include <asm/arch/clock.h>
+#include <asm/arch/grf_rk3399.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/periph.h>
-#include <asm/arch/sdram.h>
-#include <asm/arch/timer.h>
+#include <asm/io.h>
+#include <debug_uart.h>
+#include <dm.h>
 #include <dm/pinctrl.h>
-#include <power/regulator.h>
+#include <ram.h>
+#include <spl.h>
+#include <syscon.h>
 
-DECLARE_GLOBAL_DATA_PTR;
+void board_return_to_bootrom(void)
+{
+       back_to_bootrom(BROM_BOOT_NEXTSTAGE);
+}
 
-u32 spl_boot_device(void)
+static const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
+       [BROM_BOOTSOURCE_EMMC] = "/sdhci@fe330000",
+       [BROM_BOOTSOURCE_SPINOR] = "/spi@ff1d0000",
+       [BROM_BOOTSOURCE_SD] = "/dwmmc@fe320000",
+};
+
+const char *board_spl_was_booted_from(void)
 {
-       return BOOT_DEVICE_MMC1;
+       u32  bootdevice_brom_id = readl(RK3399_BROM_BOOTSOURCE_ID_ADDR);
+       const char *bootdevice_ofpath = NULL;
+
+       if (bootdevice_brom_id < ARRAY_SIZE(boot_devices))
+               bootdevice_ofpath = boot_devices[bootdevice_brom_id];
+
+       if (bootdevice_ofpath)
+               debug("%s: brom_bootdevice_id %x maps to '%s'\n",
+                     __func__, bootdevice_brom_id, bootdevice_ofpath);
+       else
+               debug("%s: failed to resolve brom_bootdevice_id %x\n",
+                     __func__, bootdevice_brom_id);
+
+       return bootdevice_ofpath;
 }
 
-u32 spl_boot_mode(const u32 boot_device)
+u32 spl_boot_device(void)
 {
-       return MMCSD_MODE_RAW;
+       u32 boot_device = BOOT_DEVICE_MMC1;
+
+       if (CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM))
+               return BOOT_DEVICE_BOOTROM;
+
+       return boot_device;
 }
 
 #define TIMER_CHN10_BASE       0xff8680a0
@@ -54,7 +79,6 @@ void secure_timer_init(void)
 
 void board_debug_uart_init(void)
 {
-#include <asm/arch/grf_rk3399.h>
 #define GRF_BASE       0xff770000
        struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
 
@@ -81,13 +105,12 @@ void board_debug_uart_init(void)
 #endif
 }
 
-#define GRF_EMMCCORE_CON11 0xff77f02c
-#define SGRF_DDR_RGN_CON16 0xff330040
-#define SGRF_SLV_SECURE_CON4 0xff33e3d0
 void board_init_f(ulong dummy)
 {
        struct udevice *pinctrl;
        struct udevice *dev;
+       struct rk3399_pmusgrf_regs *sgrf;
+       struct rk3399_grf_regs *grf;
        int ret;
 
 #define EARLY_UART
@@ -104,9 +127,6 @@ void board_init_f(ulong dummy)
        printascii("U-Boot SPL board init");
 #endif
 
-       /*  Emmc clock generator: disable the clock multipilier */
-       rk_clrreg(GRF_EMMCCORE_CON11, 0x0ff);
-
        ret = spl_early_init();
        if (ret) {
                debug("spl_early_init() failed: %d\n", ret);
@@ -122,8 +142,13 @@ void board_init_f(ulong dummy)
         * driver, which tries to DMA from/to the stack (likely)
         * located in this range.
         */
-       rk_clrsetreg(SGRF_DDR_RGN_CON16, 0x1FF, 0);
-       rk_clrreg(SGRF_SLV_SECURE_CON4, 0x2000);
+       sgrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUSGRF);
+       rk_clrsetreg(&sgrf->ddr_rgn_con[16], 0x1ff, 0);
+       rk_clrreg(&sgrf->slv_secure_con4, 0x2000);
+
+       /*  eMMC clock generator: disable the clock multipilier */
+       grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+       rk_clrreg(&grf->emmccore_con[11], 0x0ff);
 
        secure_timer_init();
 
@@ -140,37 +165,6 @@ void board_init_f(ulong dummy)
        }
 }
 
-void spl_board_init(void)
-{
-       struct udevice *pinctrl;
-       int ret;
-
-       ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
-       if (ret) {
-               debug("%s: Cannot find pinctrl device\n", __func__);
-               goto err;
-       }
-
-       /* Enable debug UART */
-       ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG);
-       if (ret) {
-               debug("%s: Failed to set up console UART\n", __func__);
-               goto err;
-       }
-
-       preloader_console_init();
-#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM)
-       back_to_bootrom();
-#endif
-
-       return;
-err:
-       printf("spl_board_init: Error %d\n", ret);
-
-       /* No way to report error here */
-       hang();
-}
-
 #ifdef CONFIG_SPL_LOAD_FIT
 int board_fit_config_name_match(const char *name)
 {