+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2016 Rockchip Electronics Co., Ltd
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <spl_gpio.h>
#include <asm/armv8/mmu.h>
#include <asm/io.h>
-#include <asm/arch/hardware.h>
+#include <asm/arch-rockchip/gpio.h>
+#include <asm/arch-rockchip/grf_rk3399.h>
+#include <asm/arch-rockchip/hardware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
#define GRF_EMMCCORE_CON11 0xff77f02c
+#define GRF_BASE 0xff770000
static struct mm_region rk3399_mem_map[] = {
{
.virt = 0x0UL,
.phys = 0x0UL,
- .size = 0x80000000UL,
+ .size = 0xf8000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
- .virt = 0xf0000000UL,
- .phys = 0xf0000000UL,
- .size = 0x10000000UL,
+ .virt = 0xf8000000UL,
+ .phys = 0xf8000000UL,
+ .size = 0x08000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
struct mm_region *mem_map = rk3399_mem_map;
+#ifdef CONFIG_SPL_BUILD
+
+#define TIMER_END_COUNT_L 0x00
+#define TIMER_END_COUNT_H 0x04
+#define TIMER_INIT_COUNT_L 0x10
+#define TIMER_INIT_COUNT_H 0x14
+#define TIMER_CONTROL_REG 0x1c
+
+#define TIMER_EN 0x1
+#define TIMER_FMODE BIT(0)
+#define TIMER_RMODE BIT(1)
+
+void rockchip_stimer_init(void)
+{
+ /* If Timer already enabled, don't re-init it */
+ u32 reg = readl(CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG);
+
+ if (reg & TIMER_EN)
+ return;
+
+ writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_END_COUNT_L);
+ writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_END_COUNT_H);
+ writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_INIT_COUNT_L);
+ writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_INIT_COUNT_H);
+ writel(TIMER_EN | TIMER_FMODE, CONFIG_ROCKCHIP_STIMER_BASE + \
+ TIMER_CONTROL_REG);
+}
+#endif
+
+int dram_init_banksize(void)
+{
+ size_t max_size = min((unsigned long)gd->ram_size, gd->ram_top);
+
+ /* Reserve 0x200000 for ATF bl31 */
+ gd->bd->bi_dram[0].start = 0x200000;
+ gd->bd->bi_dram[0].size = max_size - gd->bd->bi_dram[0].start;
+
+ return 0;
+}
+
int arch_cpu_init(void)
{
- /* We do some SoC one time setting here. */
- /* Emmc clock generator: disable the clock multipilier */
- rk_clrreg(GRF_EMMCCORE_CON11, 0x0ff);
+#ifdef CONFIG_SPL_BUILD
+ struct rk3399_pmusgrf_regs *sgrf;
+ struct rk3399_grf_regs *grf;
+
+ /*
+ * Disable DDR and SRAM security regions.
+ *
+ * As we are entered from the BootROM, the region from
+ * 0x0 through 0xfffff (i.e. the first MB of memory) will
+ * be protected. This will cause issues with the DW_MMC
+ * driver, which tries to DMA from/to the stack (likely)
+ * located in this range.
+ */
+ sgrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUSGRF);
+ rk_clrsetreg(&sgrf->ddr_rgn_con[16], 0x1ff, 0);
+ rk_clrreg(&sgrf->slv_secure_con4, 0x2000);
+
+ /* eMMC clock generator: disable the clock multipilier */
+ grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+ rk_clrreg(&grf->emmccore_con[11], 0x0ff);
+#endif
return 0;
}
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+#define GRF_BASE 0xff770000
+#define GPIO0_BASE 0xff720000
+#define PMUGRF_BASE 0xff320000
+ struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
+#ifdef CONFIG_TARGET_CHROMEBOOK_BOB
+ struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE;
+ struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;
+#endif
+
+#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
+ /* Enable early UART0 on the RK3399 */
+ rk_clrsetreg(&grf->gpio2c_iomux,
+ GRF_GPIO2C0_SEL_MASK,
+ GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
+ rk_clrsetreg(&grf->gpio2c_iomux,
+ GRF_GPIO2C1_SEL_MASK,
+ GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
+#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff1B0000)
+ /* Enable early UART3 on the RK3399 */
+ rk_clrsetreg(&grf->gpio3b_iomux,
+ GRF_GPIO3B6_SEL_MASK,
+ GRF_UART3_SIN << GRF_GPIO3B6_SEL_SHIFT);
+ rk_clrsetreg(&grf->gpio3b_iomux,
+ GRF_GPIO3B7_SEL_MASK,
+ GRF_UART3_SOUT << GRF_GPIO3B7_SEL_SHIFT);
+#else
+# ifdef CONFIG_TARGET_CHROMEBOOK_BOB
+ rk_setreg(&grf->io_vsel, 1 << 0);
+
+ /*
+ * Let's enable these power rails here, we are already running the SPI
+ * Flash based code.
+ */
+ spl_gpio_output(gpio, GPIO(BANK_B, 2), 1); /* PP1500_EN */
+ spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), GPIO_PULL_NORMAL);
+
+ spl_gpio_output(gpio, GPIO(BANK_B, 4), 1); /* PP3000_EN */
+ spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 4), GPIO_PULL_NORMAL);
+#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */
+
+ /* Enable early UART2 channel C on the RK3399 */
+ rk_clrsetreg(&grf->gpio4c_iomux,
+ GRF_GPIO4C3_SEL_MASK,
+ GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
+ rk_clrsetreg(&grf->gpio4c_iomux,
+ GRF_GPIO4C4_SEL_MASK,
+ GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
+ /* Set channel C as UART2 input */
+ rk_clrsetreg(&grf->soc_con7,
+ GRF_UART_DBG_SEL_MASK,
+ GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
+#endif
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+const char *spl_decode_boot_device(u32 boot_device)
+{
+ int i;
+ static const struct {
+ u32 boot_device;
+ const char *ofpath;
+ } spl_boot_devices_tbl[] = {
+ { BOOT_DEVICE_MMC1, "/dwmmc@fe320000" },
+ { BOOT_DEVICE_MMC2, "/sdhci@fe330000" },
+ { BOOT_DEVICE_SPI, "/spi@ff1d0000" },
+ };
+
+ for (i = 0; i < ARRAY_SIZE(spl_boot_devices_tbl); ++i)
+ if (spl_boot_devices_tbl[i].boot_device == boot_device)
+ return spl_boot_devices_tbl[i].ofpath;
+
+ return NULL;
+}
+
+void spl_perform_fixups(struct spl_image_info *spl_image)
+{
+ void *blob = spl_image->fdt_addr;
+ const char *boot_ofpath;
+ int chosen;
+
+ /*
+ * Inject the ofpath of the device the full U-Boot (or Linux in
+ * Falcon-mode) was booted from into the FDT, if a FDT has been
+ * loaded at the same time.
+ */
+ if (!blob)
+ return;
+
+ boot_ofpath = spl_decode_boot_device(spl_image->boot_device);
+ if (!boot_ofpath) {
+ pr_err("%s: could not map boot_device to ofpath\n", __func__);
+ return;
+ }
+
+ chosen = fdt_find_or_add_subnode(blob, 0, "chosen");
+ if (chosen < 0) {
+ pr_err("%s: could not find/create '/chosen'\n", __func__);
+ return;
+ }
+ fdt_setprop_string(blob, chosen,
+ "u-boot,spl-boot-device", boot_ofpath);
+}
+#endif
projects / oweals / u-boot.git / blobdiff