+// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2017 Rockchip Electronics Co., Ltd
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <ram.h>
#include <spl.h>
#include <asm/io.h>
-#include <asm/arch/bootrom.h>
-#include <asm/arch/cru_rk322x.h>
-#include <asm/arch/grf_rk322x.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/timer.h>
-#include <asm/arch/uart.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/timer.h>
u32 spl_boot_device(void)
{
return BOOT_DEVICE_MMC1;
}
-DECLARE_GLOBAL_DATA_PTR;
-
-#define GRF_BASE 0x11000000
-#define SGRF_BASE 0x10140000
-
-#define DEBUG_UART_BASE 0x11030000
-
-void board_debug_uart_init(void)
-{
- static struct rk322x_grf * const grf = (void *)GRF_BASE;
- enum {
- GPIO1B2_SHIFT = 4,
- GPIO1B2_MASK = 3 << GPIO1B2_SHIFT,
- GPIO1B2_GPIO = 0,
- GPIO1B2_UART1_SIN,
- GPIO1B2_UART21_SIN,
-
- GPIO1B1_SHIFT = 2,
- GPIO1B1_MASK = 3 << GPIO1B1_SHIFT,
- GPIO1B1_GPIO = 0,
- GPIO1B1_UART1_SOUT,
- GPIO1B1_UART21_SOUT,
- };
- enum {
- CON_IOMUX_UART2SEL_SHIFT= 8,
- CON_IOMUX_UART2SEL_MASK = 1 << CON_IOMUX_UART2SEL_SHIFT,
- CON_IOMUX_UART2SEL_2 = 0,
- CON_IOMUX_UART2SEL_21,
- };
-
- /* Enable early UART2 channel 1 on the RK322x */
- rk_clrsetreg(&grf->gpio1b_iomux,
- GPIO1B1_MASK | GPIO1B2_MASK,
- GPIO1B2_UART21_SIN << GPIO1B2_SHIFT |
- GPIO1B1_UART21_SOUT << GPIO1B1_SHIFT);
- /* Set channel C as UART2 input */
- rk_clrsetreg(&grf->con_iomux,
- CON_IOMUX_UART2SEL_MASK,
- CON_IOMUX_UART2SEL_21 << CON_IOMUX_UART2SEL_SHIFT);
-}
#define SGRF_DDR_CON0 0x10150000
void board_init_f(ulong dummy)
struct udevice *dev;
int ret;
+#ifdef CONFIG_DEBUG_UART
/*
* Debug UART can be used from here if required:
*
*/
debug_uart_init();
printascii("SPL Init");
-
+#endif
ret = spl_early_init();
if (ret) {
debug("spl_early_init() failed: %d\n", ret);
/* Disable the ddr secure region setting to make it non-secure */
rk_clrreg(SGRF_DDR_CON0, 0x4000);
-#if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT)
+#if defined(CONFIG_SPL_ROCKCHIP_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT)
back_to_bootrom(BROM_BOOT_NEXTSTAGE);
#endif
}