board: ti: dra76-evm: Add DDR data

[oweals/u-boot.git] / arch / arm / mach-omap2 / omap5 / hwinit.c

diff --git a/arch/arm/mach-omap2/omap5/hwinit.c b/arch/arm/mach-omap2/omap5/hwinit.c
index afe59e0b58260180191dd91d036fc17f6fd30098..c520a633c43c8914f591b76461a0011d0e06deba 100644 (file)
--- a/arch/arm/mach-omap2/omap5/hwinit.c
+++ b/arch/arm/mach-omap2/omap5/hwinit.c
@@ -362,6 +362,9 @@ void init_omap_revision(void)
        case OMAP5432_CONTROL_ID_CODE_ES2_0:
                *omap_si_rev = OMAP5432_ES2_0;
                break;
+       case DRA762_CONTROL_ID_CODE_ES1_0:
+               *omap_si_rev = DRA762_ES1_0;
+               break;
        case DRA752_CONTROL_ID_CODE_ES1_0:
                *omap_si_rev = DRA752_ES1_0;
                break;
@@ -455,10 +458,14 @@ void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
 }
 
 #if defined(CONFIG_PALMAS_POWER)
+__weak void board_mmc_poweron_ldo(uint voltage)
+{
+       palmas_mmc1_poweron_ldo(LDO1_VOLTAGE, LDO1_CTRL, voltage);
+}
+
 void vmmc_pbias_config(uint voltage)
 {
        u32 value = 0;
-       struct vcores_data const *vcores = *omap_vcores;
 
        value = readl((*ctrl)->control_pbias);
        value &= ~SDCARD_PWRDNZ;
@@ -467,15 +474,7 @@ void vmmc_pbias_config(uint voltage)
        value &= ~SDCARD_BIAS_PWRDNZ;
        writel(value, (*ctrl)->control_pbias);
 
-       if (vcores->core.pmic->i2c_slave_addr == 0x60) {
-               if (voltage == LDO_VOLT_3V0)
-                       voltage = 0x19;
-               else if (voltage == LDO_VOLT_1V8)
-                       voltage = 0xa;
-               lp873x_mmc1_poweron_ldo(voltage);
-       } else {
-               palmas_mmc1_poweron_ldo(voltage);
-       }
+       board_mmc_poweron_ldo(voltage);
 
        value = readl((*ctrl)->control_pbias);
        value |= SDCARD_BIAS_PWRDNZ;