bool "Support am335x_evm"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
select TI_I2C_BOARD_DETECT
+ imply CMD_DM
+ imply SPL_DM
+ imply SPL_DM_SEQ_ALIAS
imply SPL_ENV_SUPPORT
imply SPL_EXT_SUPPORT
imply SPL_FAT_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT
imply SPL_NAND_SUPPORT
+ imply SPL_OF_LIBFDT
imply SPL_POWER_SUPPORT
+ imply SPL_SEPARATE_BSS
imply SPL_SERIAL_SUPPORT
+ imply SPL_SYS_MALLOC_SIMPLE
imply SPL_WATCHDOG_SUPPORT
imply SPL_YMODEM_SUPPORT
- imply SPL_SYS_MALLOC_SIMPLE
- imply SPL_SEPARATE_BSS
- imply SPL_DM
- imply SPL_DM_SEQ_ALIAS
- imply SPL_OF_LIBFDT
help
This option specifies support for the AM335x
GP and HS EVM development platforms. The AM335x
bool "Support am335x_baltos"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_AM335X_IGEP003X
bool "Support am335x_igep003x"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_AM335X_SHC
bool "Support am335x based shc board from bosch"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
imply CMD_SPL
config TARGET_AM335X_SL50
bool "Support am335x_sl50"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_BAV335X
bool "Support bav335x"
select BOARD_LATE_INIT
select DM
select DM_SERIAL
+ imply CMD_DM
help
The BAV335x OEM Network Processor integrates all the functions of an
embedded network computer in a small, easy to use SODIMM module which
select BOARD_LATE_INIT
select DM
select DM_SERIAL
+ imply CMD_DM
config TARGET_CM_T335
bool "Support cm_t335"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_DRACO
bool "Support draco"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_ETAMIN
bool "Support etamin"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_PCM051
bool "Support pcm051"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_PENGWYN
bool "Support pengwyn"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_PEPPER
bool "Support pepper"
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_PXM2
bool "Support pxm2"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_RASTABAN
bool "Support rastaban"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_RUT
bool "Support rut"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_THUBAN
bool "Support thuban"
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ imply CMD_DM
config TARGET_PDU001
bool "Support PDU001"
select DM
select DM_SERIAL
+ imply CMD_DM
help
Support for PDU001 platform developed by EETS GmbH.
The PDU001 is a processor and display unit developed around
endchoice
+config SPL_RTC_DDR_SUPPORT
+ bool
+ depends on SPL
+ prompt "Enable RTC-DDR ONLY Support"
+ help
+ If you want RTC-DDR ONLY Support, say Y. RTC Only with DDR in
+ self-refresh mode is a special power saving mode where in all
+ the other voltages are turned off apart from the RTC domain and DDR.
+ So only RTC is alive and ticking and one can program it to wake
+ up after a predetermined period. Once RTC alarm fires, the PMIC
+ powers up all the voltage domains. U-Boot takes a special path
+ as the DDR has contents is in self-refresh and restore path is
+ followed.
+
endif
if AM43XX || AM33XX
config ISW_ENTRY_ADDR
hex "Address in memory or XIP flash of bootloader entry point"
+ default 0x402F4000 if AM43XX
+ default 0x402F0400 if AM33XX
help
After any reset, the boot ROM on the AM43XX SOC
searches the boot media for a valid boot image.
point address depending on the device type
(secure/non-secure), boot media (xip/non-xip) and
image headers.
- default 0x402F4000 if AM43XX
- default 0x402F0400 if AM33XX
config PUB_ROM_DATA_SIZE
hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
+ default 0x8400
help
During the device boot, the public ROM uses the top of
the public L3 OCMC RAM to store r/w data like stack,
boot image. Once the ROM transfers control to the boot
image, this area is no longer used, and can be reclaimed
for run time use by the boot image.
- default 0x8400
endif