stm32f7: sdram: correct sdram configuration as per micron sdram

[oweals/u-boot.git] / arch / arm / mach-keystone / ddr3.c

diff --git a/arch/arm/mach-keystone/ddr3.c b/arch/arm/mach-keystone/ddr3.c
index 34606f4b2f77380dedbd58a874f2f14b497c8d82..ee8e12e878eb860da4e3cd8efa289d99e20a6d77 100644 (file)
--- a/arch/arm/mach-keystone/ddr3.c
+++ b/arch/arm/mach-keystone/ddr3.c
@@ -65,9 +65,8 @@ void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg)
        while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
                ;
 
-       /* Disable ECC for K2G */
        if (cpu_is_k2g()) {
-               clrbits_le32(base + KS2_DDRPHY_DATX8_4_OFFSET, 0x1);
+               setbits_le32(base + KS2_DDRPHY_DATX8_4_OFFSET, 0x1);
                clrbits_le32(base + KS2_DDRPHY_DATX8_5_OFFSET, 0x1);
                clrbits_le32(base + KS2_DDRPHY_DATX8_6_OFFSET, 0x1);
                clrbits_le32(base + KS2_DDRPHY_DATX8_7_OFFSET, 0x1);
@@ -139,7 +138,10 @@ static void ddr3_reset_data(u32 base, u32 ddr3_size)
        puts("\nClear entire DDR3 memory to enable ECC\n");
 
        /* save the SES MPAX regs */
-       msmc_get_ses_mpax(8, 0, mpax);
+       if (cpu_is_k2g())
+               msmc_get_ses_mpax(K2G_MSMC_SEGMENT_ARM, 0, mpax);
+       else
+               msmc_get_ses_mpax(K2HKLE_MSMC_SEGMENT_ARM, 0, mpax);
 
        /* setup edma slot 1 configuration */
        slot.opt = EDMA3_SLOPT_TRANS_COMP_INT_ENB |
@@ -170,8 +172,17 @@ static void ddr3_reset_data(u32 base, u32 ddr3_size)
        for (seg = 0; seg < seg_num; seg += KS2_MSMC_MAP_SEG_NUM) {
                /* map 2GB 36-bit DDR address to 32-bit DDR address in EMIF
                   access slave interface so that edma driver can access */
-               msmc_map_ses_segment(8, 0, base >> KS2_MSMC_SEG_SIZE_SHIFT,
-                                    KS2_MSMC_DST_SEG_BASE + seg, MPAX_SEG_2G);
+               if (cpu_is_k2g()) {
+                       msmc_map_ses_segment(K2G_MSMC_SEGMENT_ARM, 0,
+                                            base >> KS2_MSMC_SEG_SIZE_SHIFT,
+                                            KS2_MSMC_DST_SEG_BASE + seg,
+                                            MPAX_SEG_2G);
+               } else {
+                       msmc_map_ses_segment(K2HKLE_MSMC_SEGMENT_ARM, 0,
+                                            base >> KS2_MSMC_SEG_SIZE_SHIFT,
+                                            KS2_MSMC_DST_SEG_BASE + seg,
+                                            MPAX_SEG_2G);
+               }
 
                if ((seg_num - seg) > KS2_MSMC_MAP_SEG_NUM)
                        edma_blks = KS2_MSMC_MAP_SEG_NUM <<
@@ -198,7 +209,10 @@ static void ddr3_reset_data(u32 base, u32 ddr3_size)
        qedma3_stop(KS2_EDMA0_BASE, &edma_channel);
 
        /* restore the SES MPAX regs */
-       msmc_set_ses_mpax(8, 0, mpax);
+       if (cpu_is_k2g())
+               msmc_set_ses_mpax(K2G_MSMC_SEGMENT_ARM, 0, mpax);
+       else
+               msmc_set_ses_mpax(K2HKLE_MSMC_SEGMENT_ARM, 0, mpax);
 }
 
 static void ddr3_ecc_init_range(u32 base)