if ARCH_MX6
config MX6_SMP
+ bool
select ARM_ERRATA_751472
select ARM_ERRATA_761320
select ARM_ERRATA_794072
select ARM_ERRATA_845369
select MP
- bool
config MX6
- select ARM_ERRATA_743622 if !MX6UL && !MX6ULL
- select GPT_TIMER if !MX6UL && !MX6ULL
bool
default y
+ select ARM_ERRATA_743622 if !MX6UL && !MX6ULL
+ select GPT_TIMER if !MX6UL && !MX6ULL
imply CMD_FUSE
config MX6D
+ bool
select HAS_CAAM
select MX6_SMP
- bool
config MX6DL
+ bool
select HAS_CAAM
select MX6_SMP
- bool
config MX6Q
+ bool
select HAS_CAAM
select MX6_SMP
- bool
config MX6QDL
+ bool
select HAS_CAAM
select MX6_SMP
- bool
config MX6S
- select HAS_CAAM
bool
+ select HAS_CAAM
config MX6SL
bool
config MX6SX
+ bool
select HAS_CAAM
select ROM_UNIFIED_SECTIONS
- bool
config MX6SLL
- select ROM_UNIFIED_SECTIONS
bool
+ select ROM_UNIFIED_SECTIONS
config MX6UL
+ bool
select HAS_CAAM
- select SYS_L2CACHE_OFF
select ROM_UNIFIED_SECTIONS
select SYSCOUNTER_TIMER
- bool
+ select SYS_L2CACHE_OFF
config MX6UL_LITESOM
bool
- select MX6UL
select DM
select DM_THERMAL
+ select MX6UL
select SUPPORT_SPL
+ imply CMD_DM
config MX6UL_OPOS6UL
bool
- select MX6UL
select BOARD_LATE_INIT
select DM
select DM_GPIO
select DM_MMC
select DM_THERMAL
- select SUPPORT_SPL
+ select MX6UL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
- select SPL_SEPARATE_BSS if SPL
select SPL_PINCTRL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SUPPORT_SPL
+ imply CMD_DM
config MX6ULL
- select SYS_L2CACHE_OFF
+ bool
select ROM_UNIFIED_SECTIONS
select SYSCOUNTER_TIMER
- bool
+ select SYS_L2CACHE_OFF
+
+config MX6_OCRAM_256KB
+ bool "Support 256KB OCRAM"
+ depends on MX6D || MX6Q
+ help
+ Allows using the full 256KB size of the OCRAM on the MX6Q/MX6D series
+ of chips, such as for SPL. The OCRAM of the Lite series of chips is
+ only 128KB, so using this option will prevent the resulting code from
+ working on those chips.
config MX6_DDRCAL
bool "Include dynamic DDR calibration routines"
config TARGET_APALIS_IMX6
bool "Toradex Apalis iMX6 board"
select BOARD_LATE_INIT
- select SUPPORT_SPL
+ select MX6Q
select DM
select DM_SERIAL
select DM_THERMAL
+ select SUPPORT_SPL
+ imply CMD_DM
imply CMD_SATA
config TARGET_ARISTAINETOS
config TARGET_CGTQMX6EVAL
bool "cgtqmx6eval"
- select MX6QDL
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
+ select MX6QDL
+ select SUPPORT_SPL
+ imply CMD_DM
config TARGET_CM_FX6
bool "CM-FX6"
- select SUPPORT_SPL
- select MX6QDL
select BOARD_LATE_INIT
select DM
- select DM_SERIAL
select DM_GPIO
+ select DM_SERIAL
+ select MX6QDL
+ select SUPPORT_SPL
+ imply CMD_DM
config TARGET_COLIBRI_IMX6
bool "Toradex Colibri iMX6 board"
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_SERIAL
select DM_THERMAL
+ select SUPPORT_SPL
+ imply CMD_DM
config TARGET_COLIBRI_IMX6ULL
bool "Toradex Colibri iMX6ULL"
select DM_THERMAL
select MX6ULL
+config TARGET_DART_6UL
+ bool "Variscite imx6ULL dart(DART-SOM-6ULL)"
+ select MX6ULL
+ select DM
+ select DM_ETH
+ select DM_GPIO
+ select DM_I2C
+ select DM_MMC
+ select DM_SERIAL
+ select DM_THERMAL
+ select SUPPORT_SPL
+
config TARGET_DHCOMIMX6
bool "dh_imx6"
- select MX6QDL
- select BOARD_LATE_INIT
select BOARD_EARLY_INIT_F
- select SUPPORT_SPL
+ select BOARD_LATE_INIT
select DM
select DM_THERMAL
+ select MX6QDL
+ select SUPPORT_SPL
+ imply CMD_DM
imply CMD_SPL
config TARGET_DISPLAY5
bool "LWN DISPLAY5 board"
- select SUPPORT_SPL
select DM
+ select DM_ETH
+ select DM_I2C
+ select DM_MMC
+ select DM_SPI
+ select DM_GPIO
select DM_SERIAL
+ select SUPPORT_SPL
+ imply CMD_DM
config TARGET_EMBESTMX6BOARDS
bool "embestmx6boards"
select BOARD_LATE_INIT
+ select SUPPORT_SPL
config TARGET_GE_BX50V3
bool "General Electric Bx50v3"
bool "mccmon6"
select MX6QDL
select SUPPORT_SPL
+ select DM
+ select DM_GPIO
+ select DM_ETH
+ select DM_SERIAL
+ select DM_I2C
+ select DM_SPI
+ imply CMD_DM
config TARGET_MX6CUBOXI
bool "Solid-run mx6 boards"
- select MX6QDL
select BOARD_LATE_INIT
+ select MX6QDL
select SUPPORT_SPL
config TARGET_MX6LOGICPD
select DM_MMC
select DM_PMIC
select OF_CONTROL
+ imply CMD_DM
config TARGET_MX6MEMCAL
bool "mx6memcal"
config TARGET_MX6DL_MAMOJ
bool "Support BTicino Mamoj"
- select MX6QDL
- select OF_CONTROL
- select PINCTRL
select DM
select DM_ETH
select DM_GPIO
select DM_PMIC
select DM_PMIC_PFUZE100
select DM_THERMAL
+ select MX6QDL
+ select OF_CONTROL
+ select PINCTRL
select SPL
- select SUPPORT_SPL
select SPL_DM if SPL
- select SPL_OF_LIBFDT if SPL
- select SPL_OF_CONTROL if SPL
- select SPL_PINCTRL if SPL
- select SPL_SEPARATE_BSS if SPL
select SPL_GPIO_SUPPORT if SPL
select SPL_LIBCOMMON_SUPPORT if SPL
select SPL_LIBDISK_SUPPORT if SPL
select SPL_LIBGENERIC_SUPPORT if SPL
select SPL_MMC_SUPPORT if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_OF_LIBFDT if SPL
+ select SPL_PINCTRL if SPL
+ select SPL_SEPARATE_BSS if SPL
select SPL_SERIAL_SUPPORT if SPL
+ select SPL_USB_GADGET if SPL
select SPL_USB_HOST_SUPPORT if SPL
- select SPL_USB_GADGET_SUPPORT if SPL
select SPL_USB_SDP_SUPPORT if SPL
select SPL_WATCHDOG_SUPPORT if SPL
+ select SUPPORT_SPL
+ imply CMD_DM
config TARGET_MX6Q_ENGICAM
bool "Support Engicam i.Core(RQS)"
select BOARD_LATE_INIT
- select MX6QDL
- select OF_CONTROL
- select SPL_OF_LIBFDT
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
- select SUPPORT_SPL
+ select MX6QDL
+ select OF_CONTROL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
- select SPL_SEPARATE_BSS if SPL
+ select SPL_OF_LIBFDT
select SPL_PINCTRL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SUPPORT_SPL
+ imply CMD_DM
config TARGET_MX6SABREAUTO
bool "mx6sabreauto"
- select MX6QDL
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
- select BOARD_EARLY_INIT_F
+ select MX6QDL
+ select SUPPORT_SPL
+ imply CMD_DM
config TARGET_MX6SABRESD
bool "mx6sabresd"
- select MX6QDL
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
- select BOARD_EARLY_INIT_F
+ select MX6QDL
+ select SUPPORT_SPL
+ imply CMD_DM
config TARGET_MX6SLEVK
bool "mx6slevk"
select SUPPORT_SPL
config TARGET_MX6SLLEVK
- bool "mx6sll evk"
+ bool "mx6sll evk"
select BOARD_LATE_INIT
- select MX6SLL
- select DM
- select DM_THERMAL
+ select DM
+ select DM_THERMAL
+ select MX6SLL
+ imply CMD_DM
config TARGET_MX6SXSABRESD
bool "mx6sxsabresd"
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
- select MX6SX
- select SUPPORT_SPL
select DM
select DM_THERMAL
- select BOARD_EARLY_INIT_F
+ select MX6SX
+ select SUPPORT_SPL
config TARGET_MX6SXSABREAUTO
- bool "mx6sxsabreauto"
+ bool "mx6sxsabreauto"
+ select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+ select DM
+ select DM_THERMAL
select MX6SX
- select DM
- select DM_THERMAL
- select BOARD_EARLY_INIT_F
+ imply CMD_DM
config TARGET_MX6UL_9X9_EVK
bool "mx6ul_9x9_evk"
select BOARD_LATE_INIT
- select MX6UL
select DM
select DM_THERMAL
+ select MX6UL
select SUPPORT_SPL
+ imply CMD_DM
config TARGET_MX6UL_14X14_EVK
- select BOARD_LATE_INIT
bool "mx6ul_14x14_evk"
- select MX6UL
+ select BOARD_LATE_INIT
select DM
select DM_THERMAL
+ select MX6UL
select SUPPORT_SPL
+ imply CMD_DM
config TARGET_MX6UL_ENGICAM
bool "Support Engicam GEAM6UL/Is.IoT"
select BOARD_LATE_INIT
- select MX6UL
- select OF_CONTROL
select DM
select DM_ETH
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_THERMAL
- select SUPPORT_SPL
+ select MX6UL
+ select OF_CONTROL
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
- select SPL_SEPARATE_BSS if SPL
select SPL_PINCTRL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SUPPORT_SPL
+ imply CMD_DM
config TARGET_MX6ULL_14X14_EVK
bool "Support mx6ull_14x14_evk"
select BOARD_LATE_INIT
- select MX6ULL
select DM
select DM_THERMAL
+ select MX6ULL
+ imply CMD_DM
config TARGET_NITROGEN6X
bool "nitrogen6x"
- imply USB_HOST_ETHER
imply USB_ETHER_ASIX
- imply USB_ETHER_SMSC95XX
imply USB_ETHER_MCS7830
+ imply USB_ETHER_SMSC95XX
+ imply USB_HOST_ETHER
+ select MX6QDL
config TARGET_OPOS6ULDEV
bool "Armadeus OPOS6ULDev board"
select SUPPORT_SPL
imply CMD_SATA
+config TARGET_PICO_IMX6
+ bool "PICO-IMX6"
+ select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
+ select DM
+ select DM_THERMAL
+ select MX6QDL
+ select SUPPORT_SPL
+ imply CMD_DM
+
config TARGET_PICO_IMX6UL
bool "PICO-IMX6UL-EMMC"
select MX6UL
+ select DM
+ select SUPPORT_SPL
+ imply CMD_DM
config TARGET_LITEBOARD
bool "Grinn liteBoard (i.MX6UL)"
config TARGET_PFLA02
bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad"
- select MX6QDL
select BOARD_LATE_INIT
+ select MX6QDL
+ select SUPPORT_SPL
+
+config TARGET_PCL063
+ bool "PHYTEC PCL063 (phyCORE-i.MX6UL)"
+ select MX6UL
+ select DM
+ select DM_ETH
+ select DM_GPIO
+ select DM_I2C
+ select DM_MMC
+ select DM_SERIAL
+ select DM_THERMAL
+ select SUPPORT_SPL
+
+config TARGET_PCL063_ULL
+ bool "PHYTEC PCL063 (phyCORE-i.MX6ULL)"
+ select MX6ULL
+ select DM
+ select DM_ETH
+ select DM_GPIO
+ select DM_I2C
+ select DM_MMC
+ select DM_SERIAL
+ select DM_THERMAL
select SUPPORT_SPL
config TARGET_SECOMX6
config TARGET_KP_IMX6Q_TPC
bool "K+P KP_IMX6Q_TPC i.MX6 Quad"
- select MX6QDL
- select BOARD_LATE_INIT
select BOARD_EARLY_INIT_F
- select SUPPORT_SPL
+ select BOARD_LATE_INIT
select DM
+ select SPL_DM if SPL
select DM_THERMAL
+ select DM_MMC
+ select DM_ETH
+ select DM_REGULATOR
+ select SPL_DM_REGULATOR if SPL
+ select DM_SERIAL
+ select DM_I2C
+ select DM_GPIO
+ select DM_USB
+ select MX6QDL
+ select SUPPORT_SPL
+ select SPL_SEPARATE_BSS if SPL
+ imply CMD_DM
imply CMD_SPL
config TARGET_TQMA6
config TARGET_UDOO
bool "udoo"
- select MX6QDL
select BOARD_LATE_INIT
+ select MX6QDL
select SUPPORT_SPL
config TARGET_UDOO_NEO
bool "UDOO Neo"
select BOARD_LATE_INIT
- select SUPPORT_SPL
- select MX6SX
select DM
select DM_THERMAL
+ select MX6SX
+ select SUPPORT_SPL
+ imply CMD_DM
-config TARGET_SAMTEC_VINING_2000
- bool "samtec VIN|ING 2000"
+config TARGET_SOFTING_VINING_2000
+ bool "Softing VIN|ING 2000"
select BOARD_LATE_INIT
- select MX6SX
select DM
select DM_THERMAL
+ select MX6SX
+ select SUPPORT_SPL
+ imply CMD_DM
config TARGET_WANDBOARD
bool "wandboard"
- select MX6QDL
select BOARD_LATE_INIT
+ select MX6QDL
select SUPPORT_SPL
config TARGET_WARP
bool "WaRP"
- select MX6SL
select BOARD_LATE_INIT
+ select MX6SL
config TARGET_XPRESS
bool "CCV xPress"
select BOARD_LATE_INIT
- select MX6UL
select DM
select DM_THERMAL
+ select MX6UL
select SUPPORT_SPL
+ imply CMD_DM
config TARGET_ZC5202
bool "zc5202"
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
+ select SUPPORT_SPL
+ imply CMD_DM
config TARGET_ZC5601
bool "zc5601"
select BOARD_LATE_INIT
- select SUPPORT_SPL
select DM
select DM_THERMAL
+ select SUPPORT_SPL
+ imply CMD_DM
+config TARGET_BRPPT2
+ bool "brppt2"
+ select BOARD_LATE_INIT
+ select MX6QDL
+ select OF_CONTROL
+ select SPL_OF_LIBFDT
+ select DM
+ select DM_ETH
+ select DM_GPIO
+ select DM_I2C
+ select DM_MMC
+ select SUPPORT_SPL
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ help
+ Support
+ B&R BRPPT2 platform
+ based on Freescale's iMX6 SoC
endchoice
config SYS_SOC
source "board/grinn/liteboard/Kconfig"
source "board/phytec/pcm058/Kconfig"
source "board/phytec/pfla02/Kconfig"
+source "board/phytec/pcl063/Kconfig"
source "board/gateworks/gw_ventana/Kconfig"
source "board/kosagi/novena/Kconfig"
-source "board/samtec/vining_2000/Kconfig"
+source "board/softing/vining_2000/Kconfig"
source "board/liebherr/display5/Kconfig"
source "board/liebherr/mccmon6/Kconfig"
source "board/logicpd/imx6/Kconfig"
source "board/seco/Kconfig"
source "board/sks-kinkel/sksimx6/Kconfig"
source "board/solidrun/mx6cuboxi/Kconfig"
+source "board/technexion/pico-imx6/Kconfig"
source "board/technexion/pico-imx6ul/Kconfig"
source "board/tbs/tbs2910/Kconfig"
source "board/tqc/tqma6/Kconfig"
source "board/udoo/neo/Kconfig"
source "board/wandboard/Kconfig"
source "board/warp/Kconfig"
+source "board/BuR/brppt2/Kconfig"
endif
projects / oweals / u-boot.git / blobdiff