choice
prompt "DaVinci board select"
-
-config TARGET_ENBW_CMC
- bool "EnBW CMC board"
+ optional
config TARGET_IPAM390
bool "IPAM390 board"
+ select MACH_DAVINCI_DA850_EVM
+ select SOC_DA850
select SUPPORT_SPL
-config TARGET_DA830EVM
- bool "DA830 EVM board"
-
config TARGET_DA850EVM
bool "DA850 EVM board"
+ select MACH_DAVINCI_DA850_EVM
+ select SOC_DA850
select SUPPORT_SPL
-config TARGET_CAM_ENC_4XX
- bool "CAM ENC 4xx board"
- select SUPPORT_SPL
-
-config TARGET_HAWKBOARD
- bool "Hawkboard"
- select SUPPORT_SPL
-
-config TARGET_DAVINCI_DM355EVM
- bool "DM355 EVM board"
-
-config TARGET_DAVINCI_DM355LEOPARD
- bool "DM355 Leopard board"
-
-config TARGET_DAVINCI_DM365EVM
- bool "DM365 EVM board"
-
-config TARGET_DAVINCI_DM6467EVM
- bool "DM6467 EVM board"
-
-config TARGET_DAVINCI_DVEVM
- bool "DVEVM board"
-
config TARGET_EA20
bool "EA20 board"
+ select BOARD_LATE_INIT
+ select MACH_DAVINCI_DA850_EVM
+ select SOC_DA850
-config TARGET_DAVINCI_SCHMOOGIE
- bool "Schmoogie board"
-
-config TARGET_DAVINCI_SFFSDR
- bool "SFFSDR board"
-
-config TARGET_DAVINCI_SONATA
- bool "Sonata board"
+config TARGET_OMAPL138_LCDK
+ bool "OMAPL138 LCDK"
+ select SOC_DA8XX
+ select SUPPORT_SPL
config TARGET_CALIMAIN
bool "Calimain board"
+ select SOC_DA850
+
+config TARGET_LEGOEV3
+ bool "LEGO MINDSTORMS EV3"
+ select MACH_DAVINCI_DA850_EVM
+ select SOC_DA850
endchoice
config SYS_SOC
default "davinci"
-source "board/enbw/enbw_cmc/Kconfig"
-source "board/ait/cam_enc_4xx/Kconfig"
+config DA850_LOWLEVEL
+ bool "Enable Lowlevel DA850 initialization"
+ depends on SOC_DA850
+
+config SYS_DA850_PLL_INIT
+ bool
+
+config SYS_DA850_DDR_INIT
+ bool
+
+config SOC_DA850
+ bool
+ select SOC_DA8XX
+
+config SOC_DA8XX
+ bool
+ select SYS_DA850_DDR_INIT if SUPPORT_SPL || DA850_LOWLEVEL
+ select SYS_DA850_PLL_INIT if SUPPORT_SPL || DA850_LOWLEVEL
+
+config MACH_DAVINCI_DA850_EVM
+ bool
+
+if SYS_DA850_PLL_INIT
+comment "DA850 PLL Initialization Parameters"
+
+config SYS_DV_CLKMODE
+ int "PLLCTL Clock Mode"
+ default 0
+ help
+ Set PLLCTL Clock Mode bit as External Clock or On Chip oscillator
+
+config SYS_DA850_PLL0_POSTDIV
+ int "PLLC0 PLL Post-Divider"
+ default 1
+ help
+ Value written to PLLC0 PLL Post-Divider Control Register
+
+config SYS_DA850_PLL0_PLLDIV1
+ hex "PLLC0 Divider 1"
+ default 0x8000
+ help
+ Value written to PLLC0 Divider 1 register
+
+config SYS_DA850_PLL0_PLLDIV2
+ hex "PLLC0 Divider 2"
+ default 0x8001
+ help
+ Value written to PLLC0 Divider 2 register
+
+config SYS_DA850_PLL0_PLLDIV3
+ hex "PLLC0 Divider 3"
+ default 0x8002
+ help
+ Value written to PLLC0 Divider 3 register
+
+config SYS_DA850_PLL0_PLLDIV4
+ hex "PLLC0 Divider 4"
+ default 0x8003
+ help
+ Value written to PLLC0 Divider 4 register
+
+config SYS_DA850_PLL0_PLLDIV5
+ hex "PLLC0 Divider 5"
+ default 0x8002
+ help
+ Value written to PLLC0 Divider 5 register
+
+config SYS_DA850_PLL0_PLLDIV6
+ hex "PLLC0 Divider 6"
+ default 0x8000
+ help
+ Value written to PLLC0 Divider 6 register
+
+config SYS_DA850_PLL0_PLLDIV7
+ hex "PLLC0 Divider 7"
+ default 0x8005
+ help
+ Value written to PLLC0 Divider 7 register
+
+config SYS_DA850_PLL1_POSTDIV
+ hex "PLLC1 PLL Post-Divider"
+ default 1
+ help
+ Value written to PLLC1 PLL Post-Divider Control Register
+
+config SYS_DA850_PLL1_PLLDIV1
+ hex "PLLC1 Divider 2"
+ default 0x8000
+ help
+ Value written to PLLC1 Divider 1 register
+
+config SYS_DA850_PLL1_PLLDIV2
+ hex "PLLC1 Divider 2"
+ default 0x8001
+ help
+ Value written to PLLC1 Divider 2 register
+
+config SYS_DA850_PLL1_PLLDIV3
+ hex "PLLC1 Divider 3"
+ default 0x8002
+ help
+ Value written to PLLC1 Divider 3 register
+
+endif
+
source "board/Barix/ipam390/Kconfig"
source "board/davinci/da8xxevm/Kconfig"
-source "board/davinci/dm355evm/Kconfig"
-source "board/davinci/dm355leopard/Kconfig"
-source "board/davinci/dm365evm/Kconfig"
-source "board/davinci/dm6467evm/Kconfig"
-source "board/davinci/dvevm/Kconfig"
source "board/davinci/ea20/Kconfig"
-source "board/davinci/schmoogie/Kconfig"
-source "board/davinci/sffsdr/Kconfig"
-source "board/davinci/sonata/Kconfig"
source "board/omicron/calimain/Kconfig"
+source "board/lego/ev3/Kconfig"
+
+config SPL_LDSCRIPT
+ default "board/$(BOARDDIR)/u-boot-spl-ipam390.lds" if TARGET_IPAM390
+ default "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
endif