zynq: Kconfig: extend the bootstrap malloc() pool

[oweals/u-boot.git] / arch / arm / mach-davinci / Kconfig

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 4997b2ce54dcec59008193766eb579dec5e8978a..12b1e682e6a221b69cffb052043dcd703b61dcd4 100644 (file)
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -4,39 +4,156 @@ choice
        prompt "DaVinci board select"
        optional
 
-config TARGET_ENBW_CMC
-       bool "EnBW CMC board"
-
 config TARGET_IPAM390
        bool "IPAM390 board"
+       select MACH_DAVINCI_DA850_EVM
+       select SOC_DA850
        select SUPPORT_SPL
 
-config TARGET_DA830EVM
-       bool "DA830 EVM board"
-
 config TARGET_DA850EVM
        bool "DA850 EVM board"
+       select MACH_DAVINCI_DA850_EVM
+       select SOC_DA850
        select SUPPORT_SPL
 
 config TARGET_EA20
        bool "EA20 board"
+       select BOARD_LATE_INIT
+       select MACH_DAVINCI_DA850_EVM
+       select SOC_DA850
 
 config TARGET_OMAPL138_LCDK
        bool "OMAPL138 LCDK"
+       select SOC_DA8XX
        select SUPPORT_SPL
 
 config TARGET_CALIMAIN
        bool "Calimain board"
+       select SOC_DA850
+
+config TARGET_LEGOEV3
+       bool "LEGO MINDSTORMS EV3"
+       select MACH_DAVINCI_DA850_EVM
+       select SOC_DA850
 
 endchoice
 
 config SYS_SOC
        default "davinci"
 
-source "board/enbw/enbw_cmc/Kconfig"
+config DA850_LOWLEVEL
+       bool "Enable Lowlevel DA850 initialization"
+       depends on SOC_DA850
+
+config SYS_DA850_PLL_INIT
+       bool
+
+config SYS_DA850_DDR_INIT
+       bool
+
+config SOC_DA850
+       bool
+       select SOC_DA8XX
+
+config SOC_DA8XX
+       bool
+       select SYS_DA850_DDR_INIT if SUPPORT_SPL || DA850_LOWLEVEL
+       select SYS_DA850_PLL_INIT if SUPPORT_SPL || DA850_LOWLEVEL
+
+config MACH_DAVINCI_DA850_EVM
+       bool
+
+if SYS_DA850_PLL_INIT
+comment "DA850 PLL Initialization Parameters"
+
+config SYS_DV_CLKMODE
+       int "PLLCTL Clock Mode"
+       default 0
+       help
+         Set PLLCTL Clock Mode bit as External Clock or On Chip oscillator
+
+config SYS_DA850_PLL0_POSTDIV
+       int "PLLC0 PLL Post-Divider"
+       default 1
+       help
+         Value written to PLLC0 PLL Post-Divider Control Register
+
+config SYS_DA850_PLL0_PLLDIV1
+       hex "PLLC0 Divider 1"
+       default 0x8000
+       help
+         Value written to PLLC0 Divider 1 register
+
+config SYS_DA850_PLL0_PLLDIV2
+       hex "PLLC0 Divider 2"
+       default 0x8001
+       help
+         Value written to PLLC0 Divider 2 register
+
+config SYS_DA850_PLL0_PLLDIV3
+       hex "PLLC0 Divider 3"
+       default 0x8002
+       help
+         Value written to PLLC0 Divider 3 register
+
+config SYS_DA850_PLL0_PLLDIV4
+       hex "PLLC0 Divider 4"
+       default 0x8003
+       help
+         Value written to PLLC0 Divider 4 register
+
+config SYS_DA850_PLL0_PLLDIV5
+       hex "PLLC0 Divider 5"
+       default 0x8002
+       help
+         Value written to PLLC0 Divider 5 register
+
+config SYS_DA850_PLL0_PLLDIV6
+       hex "PLLC0 Divider 6"
+       default 0x8000
+       help
+         Value written to PLLC0 Divider 6 register
+
+config SYS_DA850_PLL0_PLLDIV7
+       hex "PLLC0 Divider 7"
+       default 0x8005
+       help
+         Value written to PLLC0 Divider 7 register
+
+config SYS_DA850_PLL1_POSTDIV
+       hex "PLLC1 PLL Post-Divider"
+       default 1
+       help
+         Value written to PLLC1 PLL Post-Divider Control Register
+
+config SYS_DA850_PLL1_PLLDIV1
+       hex "PLLC1 Divider 2"
+       default 0x8000
+       help
+         Value written to PLLC1 Divider 1 register
+
+config SYS_DA850_PLL1_PLLDIV2
+       hex "PLLC1 Divider 2"
+       default 0x8001
+       help
+         Value written to PLLC1 Divider 2 register
+
+config SYS_DA850_PLL1_PLLDIV3
+       hex "PLLC1 Divider 3"
+       default 0x8002
+       help
+         Value written to PLLC1 Divider 3 register
+
+endif
+
 source "board/Barix/ipam390/Kconfig"
 source "board/davinci/da8xxevm/Kconfig"
 source "board/davinci/ea20/Kconfig"
 source "board/omicron/calimain/Kconfig"
+source "board/lego/ev3/Kconfig"
+
+config SPL_LDSCRIPT
+       default "board/$(BOARDDIR)/u-boot-spl-ipam390.lds" if TARGET_IPAM390
+       default "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
 
 endif