* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/system.h>
+#include <asm/cache.h>
+#include <linux/compiler.h>
+
+#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
+
+DECLARE_GLOBAL_DATA_PTR;
+
+__weak void arm_init_before_mmu(void)
+{
+}
+
+__weak void arm_init_domains(void)
+{
+}
-#if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE))
static void cp_delay (void)
{
volatile int i;
/* copro seems to need some delay between reading and writing */
for (i = 0; i < 100; i++)
nop();
+ asm volatile("" : : : "memory");
+}
+
+void set_section_dcache(int section, enum dcache_option option)
+{
+ u32 *page_table = (u32 *)gd->arch.tlb_addr;
+ u32 value;
+
+ value = (section << MMU_SECTION_SHIFT) | (3 << 10);
+ value |= option;
+ page_table[section] = value;
+}
+
+__weak void mmu_page_table_flush(unsigned long start, unsigned long stop)
+{
+ debug("%s: Warning: not implemented\n", __func__);
+}
+
+void mmu_set_region_dcache_behaviour(phys_addr_t start, size_t size,
+ enum dcache_option option)
+{
+ u32 *page_table = (u32 *)gd->arch.tlb_addr;
+ unsigned long upto, end;
+
+ end = ALIGN(start + size, MMU_SECTION_SIZE) >> MMU_SECTION_SHIFT;
+ start = start >> MMU_SECTION_SHIFT;
+ debug("%s: start=%pa, size=%zu, option=%d\n", __func__, &start, size,
+ option);
+ for (upto = start; upto < end; upto++)
+ set_section_dcache(upto, option);
+ mmu_page_table_flush((u32)&page_table[start], (u32)&page_table[end]);
+}
+
+__weak void dram_bank_mmu_setup(int bank)
+{
+ bd_t *bd = gd->bd;
+ int i;
+
+ debug("%s: bank: %d\n", __func__, bank);
+ for (i = bd->bi_dram[bank].start >> 20;
+ i < (bd->bi_dram[bank].start >> 20) + (bd->bi_dram[bank].size >> 20);
+ i++) {
+#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
+ set_section_dcache(i, DCACHE_WRITETHROUGH);
+#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
+ set_section_dcache(i, DCACHE_WRITEALLOC);
+#else
+ set_section_dcache(i, DCACHE_WRITEBACK);
+#endif
+ }
+}
+
+/* to activate the MMU we need to set up virtual memory: use 1M areas */
+static inline void mmu_setup(void)
+{
+ int i;
+ u32 reg;
+
+ arm_init_before_mmu();
+ /* Set up an identity-mapping for all 4GB, rw for everyone */
+ for (i = 0; i < 4096; i++)
+ set_section_dcache(i, DCACHE_OFF);
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ dram_bank_mmu_setup(i);
+ }
+
+#ifdef CONFIG_ARMV7
+ /* Set TTBR0 */
+ reg = gd->arch.tlb_addr & TTBR0_BASE_ADDR_MASK;
+#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
+ reg |= TTBR0_RGN_WT | TTBR0_IRGN_WT;
+#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
+ reg |= TTBR0_RGN_WBWA | TTBR0_IRGN_WBWA;
+#else
+ reg |= TTBR0_RGN_WB | TTBR0_IRGN_WB;
+#endif
+ asm volatile("mcr p15, 0, %0, c2, c0, 0"
+ : : "r" (reg) : "memory");
+#else
+ /* Copy the page table address to cp15 */
+ asm volatile("mcr p15, 0, %0, c2, c0, 0"
+ : : "r" (gd->arch.tlb_addr) : "memory");
+#endif
+ /* Set the access control to all-supervisor */
+ asm volatile("mcr p15, 0, %0, c3, c0, 0"
+ : : "r" (~0));
+
+ arm_init_domains();
+
+ /* and enable the mmu */
+ reg = get_cr(); /* get control reg. */
+ cp_delay();
+ set_cr(reg | CR_M);
+}
+
+static int mmu_enabled(void)
+{
+ return get_cr() & CR_M;
}
/* cache_bit must be either CR_I or CR_C */
{
uint32_t reg;
+ /* The data cache is not active unless the mmu is enabled too */
+ if ((cache_bit == CR_C) && !mmu_enabled())
+ mmu_setup();
reg = get_cr(); /* get control reg. */
cp_delay();
set_cr(reg | cache_bit);
reg = get_cr();
cp_delay();
+
+ if (cache_bit == CR_C) {
+ /* if cache isn;t enabled no need to disable */
+ if ((reg & CR_C) != CR_C)
+ return;
+ /* if disabling data cache, disable mmu too */
+ cache_bit |= CR_M;
+ }
+ reg = get_cr();
+ cp_delay();
+ if (cache_bit == (CR_C | CR_M))
+ flush_dcache_all();
set_cr(reg & ~cache_bit);
}
#endif
-#ifdef CONFIG_SYS_NO_ICACHE
+#ifdef CONFIG_SYS_ICACHE_OFF
void icache_enable (void)
{
return;
}
#endif
-#ifdef CONFIG_SYS_NO_DCACHE
+#ifdef CONFIG_SYS_DCACHE_OFF
void dcache_enable (void)
{
return;