+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2015 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
+ * Copyright 2017 NXP
*/
#ifndef __FSL_SECURE_BOOT_H
#define __FSL_SECURE_BOOT_H
-#ifdef CONFIG_SECURE_BOOT
-
-#ifndef CONFIG_FIT_SIGNATURE
-#define CONFIG_CHAIN_OF_TRUST
-#endif
-
-#endif
-
#ifdef CONFIG_CHAIN_OF_TRUST
-#define CONFIG_CMD_ESBC_VALIDATE
#define CONFIG_FSL_SEC_MON
-#define CONFIG_SHA_HW_ACCEL
-#define CONFIG_SHA_PROG_HW_ACCEL
-#define CONFIG_RSA_FREESCALE_EXP
-
-#ifndef CONFIG_FSL_CAAM
-#define CONFIG_FSL_CAAM
-#endif
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_DM 1
-#define CONFIG_SPL_CRYPTO_SUPPORT
-#define CONFIG_SPL_HASH_SUPPORT
-#define CONFIG_SPL_RSA
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
/*
* Define the key hash for U-Boot here if public/private key pair used to
* sign U-boot are different from the SRK hash put in the fuse
#define CONFIG_SPL_UBOOT_KEY_HASH NULL
#endif /* ifdef CONFIG_SPL_BUILD */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_CMD_BLOB
-#define CONFIG_CMD_HASH
#define CONFIG_KEY_REVOCATION
+
+#if defined(CONFIG_FSL_LAYERSCAPE)
+/*
+ * For fsl layerscape based platforms, ESBC image Address in Header
+ * is 64 bit.
+ */
+#define CONFIG_ESBC_ADDR_64BIT
+#endif
+
+#ifndef CONFIG_SPL_BUILD
#ifndef CONFIG_SYS_RAMBOOT
/* The key used for verification of next level images
* is picked up from an Extension Table which has
* in boot ROM of the SoC.
* The feature is only applicable in case of NOR boot and is
* not applicable in case of RAMBOOT (NAND, SD, SPI).
+ * For LS, this feature is available for all device if IE Table
+ * is copied to XIP memory
+ * Also, for LS, ISBC doesn't verify this table.
*/
-#ifndef CONFIG_ESBC_HDR_LS
-/* Current Key EXT feature not available in LS ESBC Header */
#define CONFIG_FSL_ISBC_KEY_EXT
-#endif
#endif
-#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A)
-/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit
- * Similiarly for LS2080
- */
-#define CONFIG_ESBC_ADDR_64BIT
-#endif
-
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
#define CONFIG_EXTRA_ENV \
"setenv fdt_high 0xa0000000;" \
"setenv initrd_high 0xcfffffff;" \
/* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from
* Non-XIP Memory (Nand/SD)*/
-#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_LS2080A) || \
- defined(CONFIG_SD_BOOT)
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_FSL_LSCH3) || \
+ defined(CONFIG_SD_BOOT) || defined(CONFIG_NAND_BOOT)
#define CONFIG_BOOTSCRIPT_COPY_RAM
#endif
/* The address needs to be modified according to NOR, NAND, SD and
* DDR memory map
*/
-#ifdef CONFIG_LS2080A
-#define CONFIG_BS_HDR_ADDR_DEVICE 0x583920000
-#define CONFIG_BS_ADDR_DEVICE 0x583900000
-#define CONFIG_BS_HDR_ADDR_RAM 0xa3920000
-#define CONFIG_BS_ADDR_RAM 0xa3900000
-#define CONFIG_BS_HDR_SIZE 0x00002000
+#ifdef CONFIG_FSL_LSCH3
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_BS_ADDR_DEVICE 0x20600000
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x20640000
+#else /* NOR BOOT */
+#define CONFIG_BS_ADDR_DEVICE 0x580600000
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x580640000
+#endif /*ifdef CONFIG_QSPI_BOOT */
#define CONFIG_BS_SIZE 0x00001000
+#define CONFIG_BS_HDR_SIZE 0x00004000
+#define CONFIG_BS_ADDR_RAM 0xa0600000
+#define CONFIG_BS_HDR_ADDR_RAM 0xa0640000
#else
#ifdef CONFIG_SD_BOOT
/* For SD boot address and size are assigned in terms of sector
* offset and no. of sectors respectively.
*/
-#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000800
-#define CONFIG_BS_ADDR_DEVICE 0x00000840
-#define CONFIG_BS_HDR_SIZE 0x00000010
+#define CONFIG_BS_ADDR_DEVICE 0x00003000
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x00003200
#define CONFIG_BS_SIZE 0x00000008
-#else
-#define CONFIG_BS_HDR_ADDR_DEVICE 0x600a0000
-#define CONFIG_BS_ADDR_DEVICE 0x60060000
+#define CONFIG_BS_HDR_SIZE 0x00000010
+#elif defined(CONFIG_NAND_BOOT)
+#define CONFIG_BS_ADDR_DEVICE 0x00600000
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x00640000
+#define CONFIG_BS_SIZE 0x00001000
#define CONFIG_BS_HDR_SIZE 0x00002000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_BS_ADDR_DEVICE 0x40600000
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x40640000
#define CONFIG_BS_SIZE 0x00001000
-#endif /* #ifdef CONFIG_SD_BOOT */
-#define CONFIG_BS_HDR_ADDR_RAM 0x81000000
-#define CONFIG_BS_ADDR_RAM 0x81020000
+#define CONFIG_BS_HDR_SIZE 0x00002000
+#else /* Default NOR Boot */
+#define CONFIG_BS_ADDR_DEVICE 0x60600000
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x60640000
+#define CONFIG_BS_SIZE 0x00001000
+#define CONFIG_BS_HDR_SIZE 0x00002000
+#endif
+#define CONFIG_BS_ADDR_RAM 0x81000000
+#define CONFIG_BS_HDR_ADDR_RAM 0x81020000
#endif
#ifdef CONFIG_BOOTSCRIPT_COPY_RAM
-#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM
#define CONFIG_BOOTSCRIPT_ADDR CONFIG_BS_ADDR_RAM
+#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM
#else
#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_DEVICE
/* BOOTSCRIPT_ADDR is not required */
#endif
+#ifdef CONFIG_FSL_LS_PPA
+/* Define the key hash here if SRK used for signing PPA image is
+ * different from SRK hash put in SFP used for U-Boot.
+ * Example
+ * #define PPA_KEY_HASH \
+ * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b"
+ */
+#define PPA_KEY_HASH NULL
+#endif /* ifdef CONFIG_FSL_LS_PPA */
+
#include <config_fsl_chain_trust.h>
#endif /* #ifndef CONFIG_SPL_BUILD */
#endif /* #ifdef CONFIG_CHAIN_OF_TRUST */
projects / oweals / u-boot.git / blobdiff