imx6: iomux: Add generic function to set RGMII IO voltage on IMX6 SoCs

[oweals/u-boot.git] / arch / arm / include / asm / cache.h

diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index 6d60a4a6d955d276d12a492bdcf59342882a7dc0..fac65d8d7c9cc36fe6ed4c608eee5584586ddd06 100644 (file)
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -11,9 +11,14 @@
 
 #include <asm/system.h>
 
+#ifndef CONFIG_ARM64
+
 /*
  * Invalidate L2 Cache using co-proc instruction
  */
+#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD)
+void invalidate_l2_cache(void);
+#else
 static inline void invalidate_l2_cache(void)
 {
        unsigned int val=0;
@@ -22,21 +27,27 @@ static inline void invalidate_l2_cache(void)
                : : "r" (val) : "cc");
        isb();
 }
+#endif
+
+int check_cache_range(unsigned long start, unsigned long stop);
 
 void l2_cache_enable(void);
 void l2_cache_disable(void);
 void set_section_dcache(int section, enum dcache_option option);
 
+void arm_init_before_mmu(void);
+void arm_init_domains(void);
+void cpu_cache_initialization(void);
 void dram_bank_mmu_setup(int bank);
+
+#endif
+
 /*
- * The current upper bound for ARM L1 data cache line sizes is 64 bytes.  We
- * use that value for aligning DMA buffers unless the board config has specified
- * an alternate cache line size.
+ * The value of the largest data cache relevant to DMA operations shall be set
+ * for us in CONFIG_SYS_CACHELINE_SIZE.  In some cases this may be a larger
+ * value than found in the L1 cache but this is OK to use in terms of
+ * alignment.
  */
-#ifdef CONFIG_SYS_CACHELINE_SIZE
 #define ARCH_DMA_MINALIGN      CONFIG_SYS_CACHELINE_SIZE
-#else
-#define ARCH_DMA_MINALIGN      64
-#endif
 
 #endif /* _ASM_CACHE_H */