/*
- * This is a copy of omap3/spl.h:
- *
- * (C) Copyright 2012
- * Texas Instruments, <www.ti.com>
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _ASM_ARCH_SPL_H_
-#define _ASM_SPL_H_
+#define _ASM_ARCH_SPL_H_
+
+#define BOOT0_MAGIC "eGON.BT0"
+#define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */
+#define SPL_HEADER_VERSION 2
+
+#ifdef CONFIG_SUNXI_HIGH_SRAM
+#define SPL_ADDR 0x10000
+#else
+#define SPL_ADDR 0x0
+#endif
+
+/* The low 8-bits of the 'boot_media' field in the SPL header */
+#define SUNXI_BOOTED_FROM_MMC0 0
+#define SUNXI_BOOTED_FROM_NAND 1
+#define SUNXI_BOOTED_FROM_MMC2 2
+#define SUNXI_BOOTED_FROM_SPI 3
+
+/* boot head definition from sun4i boot code */
+struct boot_file_head {
+ uint32_t b_instruction; /* one intruction jumping to real code */
+ uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */
+ uint32_t check_sum; /* generated by PC */
+ uint32_t length; /* generated by PC */
+ /*
+ * We use a simplified header, only filling in what is needed
+ * by the boot ROM. To be compatible with Allwinner tools we
+ * would need to implement the proper fields here instead of
+ * padding.
+ *
+ * Actually we want the ability to recognize our "sunxi" variant
+ * of the SPL. To do so, let's place a special signature into the
+ * "pub_head_size" field. We can reasonably expect Allwinner's
+ * boot0 to always have the upper 16 bits of this set to 0 (after
+ * all the value shouldn't be larger than the limit imposed by
+ * SRAM size).
+ * If the signature is present (at 0x14), then we know it's safe
+ * to use the remaining 8 bytes (at 0x18) for our own purposes.
+ * (E.g. sunxi-tools "fel" utility can pass information there.)
+ */
+ union {
+ uint32_t pub_head_size;
+ uint8_t spl_signature[4];
+ };
+ uint32_t fel_script_address;
+ /*
+ * If the fel_uEnv_length member below is set to a non-zero value,
+ * it specifies the size (byte count) of data at fel_script_address.
+ * At the same time this indicates that the data is in uEnv.txt
+ * compatible format, ready to be imported via "env import -t".
+ */
+ uint32_t fel_uEnv_length;
+ /*
+ * Offset of an ASCIIZ string (relative to the SPL header), which
+ * contains the default device tree name (CONFIG_DEFAULT_DEVICE_TREE).
+ * This is optional and may be set to NULL. Is intended to be used
+ * by flash programming tools for providing nice informative messages
+ * to the users.
+ */
+ uint32_t dt_name_offset;
+ uint32_t reserved1;
+ uint32_t boot_media; /* written here by the boot ROM */
+ /* A padding area (may be used for storing text strings) */
+ uint32_t string_pool[13];
+ /* The header must be a multiple of 32 bytes (for VBAR alignment) */
+};
+
+/* Compile time check to assure proper alignment of structure */
+typedef char boot_file_head_not_multiple_of_32[1 - 2*(sizeof(struct boot_file_head) % 32)];
+
+#define is_boot0_magic(addr) (memcmp((void *)addr, BOOT0_MAGIC, 8) == 0)
-#define BOOT_DEVICE_NONE 0
-#define BOOT_DEVICE_XIP 1
-#define BOOT_DEVICE_NAND 2
-#define BOOT_DEVICE_ONE_NAND 3
-#define BOOT_DEVICE_MMC2 5 /*emmc*/
-#define BOOT_DEVICE_MMC1 6
-#define BOOT_DEVICE_XIPWAIT 7
-#define BOOT_DEVICE_MMC2_2 0xff
#endif