*/
#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000)
#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000)
-#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000)
+#define UART3_BASE (SPBA0_BASE_ADDR + 0x0000C000)
#define CSPI1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000)
#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000)
#define MMC_SDHC3_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000)
#define EPIT2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000)
#define PWM1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000)
#define PWM2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000)
-#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000)
-#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000C0000)
+#define UART1_BASE (AIPS1_BASE_ADDR + 0x000BC000)
+#define UART2_BASE (AIPS1_BASE_ADDR + 0x000C0000)
#define SRC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D0000)
#define CCM_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D4000)
#define GPC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D8000)
#define PLL1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000)
#define PLL2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000)
#define PLL3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00088000)
+#ifdef CONFIG_MX53
+#define PLL4_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008c000)
+#endif
#define AHBMAX_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000)
#define IIM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000)
#define CSU_BASE_ADDR (AIPS2_BASE_ADDR + 0x0009C000)
#define CS0_64M_CS1_32M_CS2_32M 2
#define CS0_32M_CS1_32M_CS2_32M_CS3_32M 3
+/*
+ * CSPI register definitions
+ */
+#define MXC_ECSPI
+#define MXC_CSPICTRL_EN (1 << 0)
+#define MXC_CSPICTRL_MODE (1 << 1)
+#define MXC_CSPICTRL_XCH (1 << 2)
+#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 12)
+#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0xfff) << 20)
+#define MXC_CSPICTRL_PREDIV(x) (((x) & 0xF) << 12)
+#define MXC_CSPICTRL_POSTDIV(x) (((x) & 0xF) << 8)
+#define MXC_CSPICTRL_SELCHAN(x) (((x) & 0x3) << 18)
+#define MXC_CSPICTRL_MAXBITS 0xfff
+#define MXC_CSPICTRL_TC (1 << 7)
+#define MXC_CSPICTRL_RXOVF (1 << 6)
+#define MXC_CSPIPERIOD_32KHZ (1 << 15)
+#define MAX_SPI_BYTES 32
+
+/* Bit position inside CTRL register to be associated with SS */
+#define MXC_CSPICTRL_CHAN 18
+
+/* Bit position inside CON register to be associated with SS */
+#define MXC_CSPICON_POL 4
+#define MXC_CSPICON_PHA 0
+#define MXC_CSPICON_SSPOL 12
+#define MXC_SPI_BASE_ADDRESSES \
+ CSPI1_BASE_ADDR, \
+ CSPI2_BASE_ADDR, \
+ CSPI3_BASE_ADDR,
+
/*
* Number of GPIO pins per port
*/