* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
* Contributor: Mahavir Jain <mjain@marvell.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _ASM_ARCH_ARMADA100_H
#define _ASM_ARCH_ARMADA100_H
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-#include <asm/io.h>
-#endif /* __ASSEMBLY__ */
-
#if defined (CONFIG_ARMADA100)
-#include <asm/arch/cpu.h>
/* Common APB clock register bit definitions */
#define APBC_APBCLK (1<<0) /* APB Bus Clock Enable */
/* Functional Clock Selection Mask */
#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4)
+/* Fast Ethernet Controller Clock register definition */
+#define FE_CLK_RST 0x1
+#define FE_CLK_ENA 0x8
+
+/* SSP2 Clock Control */
+#define SSP2_APBCLK 0x01
+#define SSP2_FNCLK 0x02
+
+/* USB Clock/reset control bits */
+#define USB_SPH_AXICLK_EN 0x10
+#define USB_SPH_AXI_RST 0x02
+
+/* MPMU Clocks */
+#define APB2_26M_EN (1 << 20)
+#define AP_26M (1 << 4)
+
/* Register Base Addresses */
#define ARMD1_DRAM_BASE 0xB0000000
#define ARMD1_FEC_BASE 0xC0800000
#define ARMD1_SSP5_BASE 0xD4021000
#define ARMD1_UART3_BASE 0xD4026000
#define ARMD1_MPMU_BASE 0xD4050000
+#define ARMD1_USB_HOST_BASE 0xD4209000
#define ARMD1_APMU_BASE 0xD4282800
#define ARMD1_CPU_BASE 0xD4282C00
-/*
- * Main Power Management (MPMU) Registers
- * Refer Datasheet Appendix A.8
- */
-struct armd1mpmu_registers {
- u8 pad0[0x08 - 0x00];
- u32 fccr; /*0x0008*/
- u32 pocr; /*0x000c*/
- u32 posr; /*0x0010*/
- u32 succr; /*0x0014*/
- u8 pad1[0x030 - 0x014 - 4];
- u32 gpcr; /*0x0030*/
- u8 pad2[0x200 - 0x030 - 4];
- u32 wdtpcr; /*0x0200*/
- u8 pad3[0x1000 - 0x200 - 4];
- u32 apcr; /*0x1000*/
- u32 apsr; /*0x1004*/
- u8 pad4[0x1020 - 0x1004 - 4];
- u32 aprr; /*0x1020*/
- u32 acgr; /*0x1024*/
- u32 arsr; /*0x1028*/
-};
-
-/*
- * APB1 Clock Reset/Control Registers
- * Refer Datasheet Appendix A.10
- */
-struct armd1apb1_registers {
- u32 uart1; /*0x000*/
- u32 uart2; /*0x004*/
- u32 gpio; /*0x008*/
- u32 pwm1; /*0x00c*/
- u32 pwm2; /*0x010*/
- u32 pwm3; /*0x014*/
- u32 pwm4; /*0x018*/
- u8 pad0[0x028 - 0x018 - 4];
- u32 rtc; /*0x028*/
- u32 twsi0; /*0x02c*/
- u32 kpc; /*0x030*/
- u32 timers; /*0x034*/
- u8 pad1[0x03c - 0x034 - 4];
- u32 aib; /*0x03c*/
- u32 sw_jtag; /*0x040*/
- u32 timer1; /*0x044*/
- u32 onewire; /*0x048*/
- u8 pad2[0x050 - 0x048 - 4];
- u32 asfar; /*0x050 AIB Secure First Access Reg*/
- u32 assar; /*0x054 AIB Secure Second Access Reg*/
- u8 pad3[0x06c - 0x054 - 4];
- u32 twsi1; /*0x06c*/
- u32 uart3; /*0x070*/
- u8 pad4[0x07c - 0x070 - 4];
- u32 timer2; /*0x07C*/
- u8 pad5[0x084 - 0x07c - 4];
- u32 ac97; /*0x084*/
-};
-
#endif /* CONFIG_ARMADA100 */
#endif /* _ASM_ARCH_ARMADA100_H */