#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
#include <dt-bindings/phy/phy.h>
/ {
chosen {
bootargs = "earlycon";
stdout-path = "serial0:115200n8";
+ xlnx,eeprom = &eeprom;
};
memory@0 {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
sw19 {
label = "sw19";
&can1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1_default>;
};
&dcc {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gem3_default>;
phy0: phy@21 {
reg = <21>;
ti,rx-internal-delay = <0x8>;
&gpio {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_default>;
};
&gpu {
&i2c0 {
status = "okay";
clock-frequency = <400000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c0_default>;
- pinctrl-1 = <&pinctrl_i2c0_gpio>;
- scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
tca6416_u97: gpio@20 {
compatible = "ti,tca6416";
status = "disabled"; /* unreachable */
reg = <0x20>;
};
-
max20751@72 { /* u95 */
compatible = "maxim,max20751";
reg = <0x72>;
&i2c1 {
status = "okay";
clock-frequency = <400000>;
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c1_default>;
- pinctrl-1 = <&pinctrl_i2c1_gpio>;
- scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
/* PL i2c via PCA9306 - u45 */
i2c-mux@74 { /* u34 */
#size-cells = <0>;
reg = <1>;
si5341: clock-generator@36 { /* SI5341 - u69 */
- compatible = "si5341";
+ compatible = "silabs,si5341";
reg = <0x36>;
};
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
+ clock-output-names = "si570_user";
};
};
i2c@3 {
temperature-stability = <50>; /* copy from zc702 */
factory-fout = <156250000>;
clock-frequency = <148500000>;
+ clock-output-names = "si570_mgt";
};
};
i2c@4 {
#size-cells = <0>;
reg = <3>;
/* DDR4 SODIMM */
- dev@19 {
- reg = <0x19>;
- };
- dev@30 {
- reg = <0x30>;
- };
- dev@35 {
- reg = <0x35>;
- };
- dev@36 {
- reg = <0x36>;
- };
- dev@51 {
- reg = <0x51>;
- };
};
i2c@4 {
#address-cells = <1>;
};
};
-&pinctrl0 {
- status = "okay";
- pinctrl_i2c0_default: i2c0-default {
- mux {
- groups = "i2c0_3_grp";
- function = "i2c0";
- };
-
- conf {
- groups = "i2c0_3_grp";
- bias-pull-up;
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
- };
-
- pinctrl_i2c0_gpio: i2c0-gpio {
- mux {
- groups = "gpio0_14_grp", "gpio0_15_grp";
- function = "gpio0";
- };
-
- conf {
- groups = "gpio0_14_grp", "gpio0_15_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
- };
-
- pinctrl_i2c1_default: i2c1-default {
- mux {
- groups = "i2c1_4_grp";
- function = "i2c1";
- };
-
- conf {
- groups = "i2c1_4_grp";
- bias-pull-up;
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
- };
-
- pinctrl_i2c1_gpio: i2c1-gpio {
- mux {
- groups = "gpio0_16_grp", "gpio0_17_grp";
- function = "gpio0";
- };
-
- conf {
- groups = "gpio0_16_grp", "gpio0_17_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
- };
-
- pinctrl_uart0_default: uart0-default {
- mux {
- groups = "uart0_4_grp";
- function = "uart0";
- };
-
- conf {
- groups = "uart0_4_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- conf-rx {
- pins = "MIO18";
- bias-high-impedance;
- };
-
- conf-tx {
- pins = "MIO19";
- bias-disable;
- };
- };
-
- pinctrl_uart1_default: uart1-default {
- mux {
- groups = "uart1_5_grp";
- function = "uart1";
- };
-
- conf {
- groups = "uart1_5_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- conf-rx {
- pins = "MIO21";
- bias-high-impedance;
- };
-
- conf-tx {
- pins = "MIO20";
- bias-disable;
- };
- };
-
- pinctrl_usb0_default: usb0-default {
- mux {
- groups = "usb0_0_grp";
- function = "usb0";
- };
-
- conf {
- groups = "usb0_0_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- conf-rx {
- pins = "MIO52", "MIO53", "MIO55";
- bias-high-impedance;
- };
-
- conf-tx {
- pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
- "MIO60", "MIO61", "MIO62", "MIO63";
- bias-disable;
- };
- };
-
- pinctrl_gem3_default: gem3-default {
- mux {
- function = "ethernet3";
- groups = "ethernet3_0_grp";
- };
-
- conf {
- groups = "ethernet3_0_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- conf-rx {
- pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
- "MIO75";
- bias-high-impedance;
- low-power-disable;
- };
-
- conf-tx {
- pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
- "MIO69";
- bias-disable;
- low-power-enable;
- };
-
- mux-mdio {
- function = "mdio3";
- groups = "mdio3_0_grp";
- };
-
- conf-mdio {
- groups = "mdio3_0_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- bias-disable;
- };
- };
-
- pinctrl_can1_default: can1-default {
- mux {
- function = "can1";
- groups = "can1_6_grp";
- };
-
- conf {
- groups = "can1_6_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- conf-rx {
- pins = "MIO25";
- bias-high-impedance;
- };
-
- conf-tx {
- pins = "MIO24";
- bias-disable;
- };
- };
-
- pinctrl_sdhci1_default: sdhci1-default {
- mux {
- groups = "sdio1_0_grp";
- function = "sdio1";
- };
-
- conf {
- groups = "sdio1_0_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- bias-disable;
- };
-
- mux-cd {
- groups = "sdio1_0_cd_grp";
- function = "sdio1_cd";
- };
-
- conf-cd {
- groups = "sdio1_0_cd_grp";
- bias-high-impedance;
- bias-pull-up;
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- mux-wp {
- groups = "sdio1_0_wp_grp";
- function = "sdio1_wp";
- };
-
- conf-wp {
- groups = "sdio1_0_wp_grp";
- bias-high-impedance;
- bias-pull-up;
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
- };
-
- pinctrl_gpio_default: gpio-default {
- mux-sw {
- function = "gpio0";
- groups = "gpio0_22_grp", "gpio0_23_grp";
- };
-
- conf-sw {
- groups = "gpio0_22_grp", "gpio0_23_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- mux-msp {
- function = "gpio0";
- groups = "gpio0_13_grp", "gpio0_38_grp";
- };
-
- conf-msp {
- groups = "gpio0_13_grp", "gpio0_38_grp";
- slew-rate = <SLEW_RATE_SLOW>;
- io-standard = <IO_STANDARD_LVCMOS18>;
- };
-
- conf-pull-up {
- pins = "MIO22", "MIO23";
- bias-pull-up;
- };
-
- conf-pull-none {
- pins = "MIO13", "MIO38";
- bias-disable;
- };
- };
-};
-
&pcie {
status = "okay";
};
status = "okay";
is-dual = <1>;
flash@0 {
- compatible = "m25p80"; /* 32MB */
+ compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
/* SD1 with level shifter */
&sdhci1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sdhci1_default>;
no-1-8-v; /* for 1.0 silicon */
xlnx,mio_bank = <1>;
};
&uart0 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0_default>;
};
&uart1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_default>;
};
/* ULPI SMSC USB3320 */
&usb0 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0_default>;
};
&dwc3_0 {
projects / oweals / u-boot.git / blobdiff