ARM: dts: rmobile: Add rudimentary R8A7790 Stout DT

[oweals/u-boot.git] / arch / arm / dts / zynqmp-zcu102-revA.dts

diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 579212ed20a20b13e2be162cf6b5484a566a5553..64a883b96e3a182fa028052dac737024b09ef5a9 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -14,6 +14,7 @@
 #include "zynqmp-clk.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
 
 / {
        model = "ZynqMP ZCU102 RevA";
@@ -80,16 +81,10 @@
 /* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
-       xlnx,include-sg; /* for testing purpose */
-       xlnx,overfetch; /* for testing purpose */
-       xlnx,ratectrl = <0>; /* for testing purpose */
-       xlnx,src-issue = <31>;
 };
 
 &fpd_dma_chan2 {
        status = "okay";
-       xlnx,ratectrl = <100>; /* for testing purpose */
-       xlnx,src-issue = <4>; /* for testing purpose */
 };
 
 &fpd_dma_chan3 {
@@ -98,7 +93,6 @@
 
 &fpd_dma_chan4 {
        status = "okay";
-       xlnx,include-sg; /* for testing purpose */
 };
 
 &fpd_dma_chan5 {
@@ -107,7 +101,6 @@
 
 &fpd_dma_chan6 {
        status = "okay";
-       xlnx,include-sg; /* for testing purpose */
 };
 
 &fpd_dma_chan7 {
@@ -116,7 +109,6 @@
 
 &fpd_dma_chan8 {
        status = "okay";
-       xlnx,include-sg; /* for testing purpose */
 };
 
 &gem3 {
@@ -485,6 +477,11 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
                        si5328: clock-generator4@69 {/* SI5328 - u20 */
                                compatible = "silabs,si5328";
                                reg = <0x69>;
+                               /*
+                                * Chip has interrupt present connected to PL
+                                * interrupt-parent = <&>;
+                                * interrupts = <>;
+                                */
                        };
                };
                /* 5 - 7 unconnected */
@@ -879,6 +876,8 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
        ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
        ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
        ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+       phy-names = "sata-phy";
+       phys = <&lane3 PHY_TYPE_SATA 1 1 125000000>;
 };
 
 /* SD1 with level shifter */
@@ -890,6 +889,10 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
        xlnx,mio_bank = <1>;
 };
 
+&serdes {
+       status = "okay";
+};
+
 &uart0 {
        status = "okay";
        pinctrl-names = "default";
@@ -912,6 +915,14 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
 &dwc3_0 {
        status = "okay";
        dr_mode = "host";
+       snps,usb3_lpm_capable;
+       phy-names = "usb3-phy";
+       phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>;
+       maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+       status = "okay";
 };
 
 &xilinx_ams {