rk3399: Add ROC-RK3399-PC Mezzanine board

[oweals/u-boot.git] / arch / arm / dts / zynq-zed.dts

diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts
index 70cc8a6c0d75134c1fda1c701b0cea9c4eea85a8..7a540b63f47135584710e0c7d0b51b8fde63cc5b 100644 (file)
--- a/arch/arm/dts/zynq-zed.dts
+++ b/arch/arm/dts/zynq-zed.dts
@@ -1,23 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
- * Xilinx ZED board DTS
- *
- * Copyright (C) 2013 Xilinx, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
+ *  Copyright (C) 2011 - 2015 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
  */
 /dts-v1/;
 #include "zynq-7000.dtsi"
 
 / {
-       model = "Zynq ZED Board";
-       compatible = "xlnx,zynq-zed", "xlnx,zynq-7000";
+       model = "Avnet ZedBoard board";
+       compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000";
 
        aliases {
+               ethernet0 = &gem0;
                serial0 = &uart1;
+               spi0 = &qspi;
+               mmc0 = &sdhci0;
        };
 
-       memory {
+       memory@0 {
                device_type = "memory";
-               reg = <0 0x20000000>;
+               reg = <0x0 0x20000000>;
        };
+
+       chosen {
+               bootargs = "";
+               stdout-path = "serial0:115200n8";
+       };
+
+       usb_phy0: phy0 {
+               compatible = "usb-nop-xceiv";
+               #phy-cells = <0>;
+       };
+};
+
+&clkc {
+       ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+       status = "okay";
+       phy-mode = "rgmii-id";
+       phy-handle = <&ethernet_phy>;
+
+       ethernet_phy: ethernet-phy@0 {
+               reg = <0>;
+               device_type = "ethernet-phy";
+       };
+};
+
+&qspi {
+       u-boot,dm-pre-reloc;
+       status = "okay";
+       num-cs = <1>;
+       flash@0 {
+               compatible = "spansion,s25fl256s", "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <30000000>;
+               m25p,fast-read;
+       };
+};
+
+&sdhci0 {
+       u-boot,dm-pre-reloc;
+       status = "okay";
+};
+
+&uart1 {
+       u-boot,dm-pre-reloc;
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+       dr_mode = "host";
+       usb-phy = <&usb_phy0>;
 };