usb: Migrate to support live DT for some driver

[oweals/u-boot.git] / arch / arm / dts / zynq-zc702.dts

diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index 6585010f4bc8b92821878c2f136fd62cd72dbdc9..d10695740fa9ec58e14cd70d6cb46813fb59802e 100644 (file)
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -1,16 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
- * Xilinx ZC702 board DTS
- *
  *  Copyright (C) 2011 - 2015 Xilinx
  *  Copyright (C) 2012 National Instruments Corp.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 /dts-v1/;
 #include "zynq-7000.dtsi"
 
 / {
-       model = "Zynq ZC702 Development Board";
+       model = "Xilinx ZC702 board";
        compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
 
        aliases {
@@ -19,9 +16,10 @@
                serial0 = &uart1;
                spi0 = &qspi;
                mmc0 = &sdhci0;
+               usb0 = &usb0;
        };
 
-       memory {
+       memory@0 {
                device_type = "memory";
                reg = <0x0 0x40000000>;
        };
@@ -33,21 +31,19 @@
 
        gpio-keys {
                compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
                autorepeat;
                sw14 {
                        label = "sw14";
                        gpios = <&gpio0 12 0>;
                        linux,code = <108>; /* down */
-                       gpio-key,wakeup;
+                       wakeup-source;
                        autorepeat;
                };
                sw13 {
                        label = "sw13";
                        gpios = <&gpio0 14 0>;
                        linux,code = <103>; /* up */
-                       gpio-key,wakeup;
+                       wakeup-source;
                        autorepeat;
                };
        };
@@ -96,6 +92,7 @@
 
        ethernet_phy: ethernet-phy@7 {
                reg = <7>;
+               device_type = "ethernet-phy";
        };
 };
 
@@ -107,10 +104,13 @@
 &i2c0 {
        status = "okay";
        clock-frequency = <400000>;
-       pinctrl-names = "default";
+       pinctrl-names = "default", "gpio";
        pinctrl-0 = <&pinctrl_i2c0_default>;
+       pinctrl-1 = <&pinctrl_i2c0_gpio>;
+       scl-gpios = <&gpio0 50 0>;
+       sda-gpios = <&gpio0 51 0>;
 
-       i2cswitch@74 {
+       i2c-mux@74 {
                compatible = "nxp,pca9548";
                #address-cells = <1>;
                #size-cells = <0>;
@@ -150,7 +150,7 @@
                        #size-cells = <0>;
                        reg = <2>;
                        eeprom@54 {
-                               compatible = "at,24c08";
+                               compatible = "atmel,24c08";
                                reg = <0x54>;
                        };
                };
@@ -299,6 +299,19 @@
                };
        };
 
+       pinctrl_i2c0_gpio: i2c0-gpio {
+               mux {
+                       groups = "gpio0_50_grp", "gpio0_51_grp";
+                       function = "gpio0";
+               };
+
+               conf {
+                       groups = "gpio0_50_grp", "gpio0_51_grp";
+                       slew-rate = <0>;
+                       io-standard = <1>;
+               };
+       };
+
        pinctrl_sdhci0_default: sdhci0-default {
                mux {
                        groups = "sdio0_2_grp";