sunxi: Add A20-SOM204-EVB-eMMC board

[oweals/u-boot.git] / arch / arm / dts / uniphier-pxs3.dtsi

diff --git a/arch/arm/dts/uniphier-pxs3.dtsi b/arch/arm/dts/uniphier-pxs3.dtsi
index 8944005ac0f65b009509a701a273a68aef1d6a41..9c3aad50433334b809e65312e6f2d4c99dd9a29a 100644 (file)
--- a/arch/arm/dts/uniphier-pxs3.dtsi
+++ b/arch/arm/dts/uniphier-pxs3.dtsi
@@ -7,6 +7,9 @@
  * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
+
 /memreserve/ 0x80000000 0x02000000;
 
 / {
@@ -73,7 +76,7 @@
                };
        };
 
-       cluster0_opp: opp_table {
+       cluster0_opp: opp-table {
                compatible = "operating-points-v2";
                opp-shared;
 
@@ -124,6 +127,11 @@
                };
        };
 
+       emmc_pwrseq: emmc-pwrseq {
+               compatible = "mmc-pwrseq-emmc";
+               reset-gpios = <&gpio UNIPHIER_GPIO_PORT(5, 7) GPIO_ACTIVE_LOW>;
+       };
+
        timer {
                compatible = "arm,armv8-timer";
                interrupts = <1 13 4>,
@@ -147,6 +155,7 @@
                        pinctrl-0 = <&pinctrl_uart0>;
                        clocks = <&peri_clk 0>;
                        clock-frequency = <58820000>;
+                       resets = <&peri_rst 0>;
                };
 
                serial1: serial@54006900 {
@@ -158,6 +167,7 @@
                        pinctrl-0 = <&pinctrl_uart1>;
                        clocks = <&peri_clk 1>;
                        clock-frequency = <58820000>;
+                       resets = <&peri_rst 1>;
                };
 
                serial2: serial@54006a00 {
@@ -169,6 +179,7 @@
                        pinctrl-0 = <&pinctrl_uart2>;
                        clocks = <&peri_clk 2>;
                        clock-frequency = <58820000>;
+                       resets = <&peri_rst 2>;
                };
 
                serial3: serial@54006b00 {
@@ -180,10 +191,11 @@
                        pinctrl-0 = <&pinctrl_uart3>;
                        clocks = <&peri_clk 3>;
                        clock-frequency = <58820000>;
+                       resets = <&peri_rst 3>;
                };
 
                gpio: gpio@55000000 {
-                       compatible = "socionext,uniphier-pxs3-gpio";
+                       compatible = "socionext,uniphier-gpio";
                        reg = <0x55000000 0x200>;
                        interrupt-parent = <&aidet>;
                        interrupt-controller;
@@ -196,6 +208,9 @@
                        gpio-ranges-group-names = "gpio_range0",
                                                  "gpio_range1",
                                                  "gpio_range2";
+                       ngpios = <286>;
+                       socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+                                                    <21 217 3>;
                };
 
                i2c0: i2c@58780000 {
@@ -208,6 +223,7 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_i2c0>;
                        clocks = <&peri_clk 4>;
+                       resets = <&peri_rst 4>;
                        clock-frequency = <100000>;
                };
 
@@ -221,6 +237,7 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_i2c1>;
                        clocks = <&peri_clk 5>;
+                       resets = <&peri_rst 5>;
                        clock-frequency = <100000>;
                };
 
@@ -234,6 +251,7 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_i2c2>;
                        clocks = <&peri_clk 6>;
+                       resets = <&peri_rst 6>;
                        clock-frequency = <100000>;
                };
 
@@ -247,6 +265,7 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_i2c3>;
                        clocks = <&peri_clk 7>;
+                       resets = <&peri_rst 7>;
                        clock-frequency = <100000>;
                };
 
@@ -258,6 +277,7 @@
                        #size-cells = <0>;
                        interrupts = <0 26 4>;
                        clocks = <&peri_clk 10>;
+                       resets = <&peri_rst 10>;
                        clock-frequency = <400000>;
                };
 
@@ -315,9 +335,11 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_emmc_1v8>;
                        clocks = <&sys_clk 4>;
+                       resets = <&sys_rst 4>;
                        bus-width = <8>;
                        mmc-ddr-1_8v;
                        mmc-hs200-1_8v;
+                       mmc-pwrseq = <&emmc_pwrseq>;
                        cdns,phy-input-delay-legacy = <4>;
                        cdns,phy-input-delay-mmc-highspeed = <2>;
                        cdns,phy-input-delay-mmc-ddr = <3>;
@@ -349,6 +371,24 @@
                        };
                };
 
+               soc-glue@5f900000 {
+                       compatible = "socionext,uniphier-pxs3-soc-glue-debug",
+                                    "simple-mfd";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0x5f900000 0x2000>;
+
+                       efuse@100 {
+                               compatible = "socionext,uniphier-efuse";
+                               reg = <0x100 0x28>;
+                       };
+
+                       efuse@200 {
+                               compatible = "socionext,uniphier-efuse";
+                               reg = <0x200 0x68>;
+                       };
+               };
+
                aidet: aidet@5fc20000 {
                        compatible = "socionext,uniphier-pxs3-aidet";
                        reg = <0x5fc20000 0x200>;
@@ -430,6 +470,7 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_nand>;
                        clocks = <&sys_clk 2>;
+                       resets = <&sys_rst 2>;
                };
        };
 };