ARM: dts: i.MX6QDL: icore-rqs: Fix eMMC detection during SPL
[oweals/u-boot.git] / arch / arm / dts / uniphier-pxs2.dtsi
index ac84d15560bd4e6e4a7160216a0d1dfafb649a92..549d930ceefec028f9c853d40d3d949ae289194a 100644 (file)
@@ -7,6 +7,9 @@
  * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+
 / {
        compatible = "socionext,uniphier-pxs2";
        #address-cells = <1>;
@@ -16,7 +19,7 @@
                #address-cells = <1>;
                #size-cells = <0>;
 
-               cpu@0 {
+               cpu0: cpu@0 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a9";
                        reg = <0>;
                        enable-method = "psci";
                        next-level-cache = <&l2>;
                        operating-points-v2 = <&cpu_opp>;
+                       #cooling-cells = <2>;
                };
 
-               cpu@1 {
+               cpu1: cpu@1 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a9";
                        reg = <1>;
@@ -36,7 +40,7 @@
                        operating-points-v2 = <&cpu_opp>;
                };
 
-               cpu@2 {
+               cpu2: cpu@2 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a9";
                        reg = <2>;
@@ -46,7 +50,7 @@
                        operating-points-v2 = <&cpu_opp>;
                };
 
-               cpu@3 {
+               cpu3: cpu@3 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a9";
                        reg = <3>;
@@ -57,7 +61,7 @@
                };
        };
 
-       cpu_opp: opp_table {
+       cpu_opp: opp-table {
                compatible = "operating-points-v2";
                opp-shared;
 
                        clock-frequency = <25000000>;
                };
 
-               arm_timer_clk: arm_timer_clk {
+               arm_timer_clk: arm-timer {
                        #clock-cells = <0>;
                        compatible = "fixed-clock";
                        clock-frequency = <50000000>;
                };
        };
 
+       thermal-zones {
+               cpu-thermal {
+                       polling-delay-passive = <250>;  /* 250ms */
+                       polling-delay = <1000>;         /* 1000ms */
+                       thermal-sensors = <&pvtctl>;
+
+                       trips {
+                               cpu_crit: cpu-crit {
+                                       temperature = <95000>;  /* 95C */
+                                       hysteresis = <2000>;
+                                       type = "critical";
+                               };
+                               cpu_alert: cpu-alert {
+                                       temperature = <85000>;  /* 85C */
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+                       };
+
+                       cooling-maps {
+                               map {
+                                       trip = <&cpu_alert>;
+                                       cooling-device = <&cpu0
+                                           THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+                               };
+                       };
+               };
+       };
+
        soc {
                compatible = "simple-bus";
                #address-cells = <1>;
                #size-cells = <1>;
                ranges;
                interrupt-parent = <&intc>;
-               u-boot,dm-pre-reloc;
 
                l2: l2-cache@500c0000 {
                        compatible = "socionext,uniphier-system-cache";
                        pinctrl-0 = <&pinctrl_uart0>;
                        clocks = <&peri_clk 0>;
                        clock-frequency = <88900000>;
+                       resets = <&peri_rst 0>;
                };
 
                serial1: serial@54006900 {
                        pinctrl-0 = <&pinctrl_uart1>;
                        clocks = <&peri_clk 1>;
                        clock-frequency = <88900000>;
+                       resets = <&peri_rst 1>;
                };
 
                serial2: serial@54006a00 {
                        pinctrl-0 = <&pinctrl_uart2>;
                        clocks = <&peri_clk 2>;
                        clock-frequency = <88900000>;
+                       resets = <&peri_rst 2>;
                };
 
                serial3: serial@54006b00 {
                        pinctrl-0 = <&pinctrl_uart3>;
                        clocks = <&peri_clk 3>;
                        clock-frequency = <88900000>;
+                       resets = <&peri_rst 3>;
                };
 
                gpio: gpio@55000000 {
                        gpio-ranges-group-names = "gpio_range0",
                                                  "gpio_range1";
                        ngpios = <232>;
+                       socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+                                                    <21 217 3>;
                };
 
                i2c0: i2c@58780000 {
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_i2c0>;
                        clocks = <&peri_clk 4>;
+                       resets = <&peri_rst 4>;
                        clock-frequency = <100000>;
                };
 
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_i2c1>;
                        clocks = <&peri_clk 5>;
+                       resets = <&peri_rst 5>;
                        clock-frequency = <100000>;
                };
 
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_i2c2>;
                        clocks = <&peri_clk 6>;
+                       resets = <&peri_rst 6>;
                        clock-frequency = <100000>;
                };
 
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_i2c3>;
                        clocks = <&peri_clk 7>;
+                       resets = <&peri_rst 7>;
                        clock-frequency = <100000>;
                };
 
                        #size-cells = <0>;
                        interrupts = <0 45 4>;
                        clocks = <&peri_clk 8>;
+                       resets = <&peri_rst 8>;
                        clock-frequency = <400000>;
                };
 
                        #size-cells = <0>;
                        interrupts = <0 25 4>;
                        clocks = <&peri_clk 9>;
+                       resets = <&peri_rst 9>;
                        clock-frequency = <400000>;
                };
 
                        #size-cells = <0>;
                        interrupts = <0 26 4>;
                        clocks = <&peri_clk 10>;
+                       resets = <&peri_rst 10>;
                        clock-frequency = <400000>;
                };
 
                        compatible = "socionext,uniphier-pxs2-sdctrl",
                                     "simple-mfd", "syscon";
                        reg = <0x59810000 0x400>;
-                       u-boot,dm-pre-reloc;
 
                        sd_clk: clock {
                                compatible = "socionext,uniphier-pxs2-sd-clock";
                        compatible = "socionext,uniphier-pxs2-soc-glue",
                                     "simple-mfd", "syscon";
                        reg = <0x5f800000 0x2000>;
-                       u-boot,dm-pre-reloc;
 
                        pinctrl: pinctrl {
                                compatible = "socionext,uniphier-pxs2-pinctrl";
-                               u-boot,dm-pre-reloc;
                        };
                };
 
                                compatible = "socionext,uniphier-pxs2-reset";
                                #reset-cells = <1>;
                        };
+
+                       pvtctl: pvtctl {
+                               compatible = "socionext,uniphier-pxs2-thermal";
+                               interrupts = <0 3 4>;
+                               #thermal-sensor-cells = <0>;
+                               socionext,tmod-calibration = <0x0f86 0x6844>;
+                       };
                };
 
                usb0: usb@65b00000 {
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_nand2cs>;
                        clocks = <&sys_clk 2>;
+                       resets = <&sys_rst 2>;
                };
        };
 };