ARM: dts: rmobile: Add rudimentary R8A7790 Stout DT

[oweals/u-boot.git] / arch / arm / dts / uniphier-ld11.dtsi

diff --git a/arch/arm/dts/uniphier-ld11.dtsi b/arch/arm/dts/uniphier-ld11.dtsi
index 0cc6fd716e5763455422af6f2527910193af853d..40f27bbb645774e7127e74546bd0c047f94a20d6 100644 (file)
--- a/arch/arm/dts/uniphier-ld11.dtsi
+++ b/arch/arm/dts/uniphier-ld11.dtsi
@@ -7,6 +7,9 @@
  * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  */
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
+
 /memreserve/ 0x80000000 0x02000000;
 
 / {
@@ -49,7 +52,7 @@
                };
        };
 
-       cluster0_opp: opp_table {
+       cluster0_opp: opp-table {
                compatible = "operating-points-v2";
                opp-shared;
 
@@ -96,6 +99,11 @@
                };
        };
 
+       emmc_pwrseq: emmc-pwrseq {
+               compatible = "mmc-pwrseq-emmc";
+               reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
+       };
+
        timer {
                compatible = "arm,armv8-timer";
                interrupts = <1 13 4>,
@@ -119,6 +127,7 @@
                        pinctrl-0 = <&pinctrl_uart0>;
                        clocks = <&peri_clk 0>;
                        clock-frequency = <58820000>;
+                       resets = <&peri_rst 0>;
                };
 
                serial1: serial@54006900 {
@@ -130,6 +139,7 @@
                        pinctrl-0 = <&pinctrl_uart1>;
                        clocks = <&peri_clk 1>;
                        clock-frequency = <58820000>;
+                       resets = <&peri_rst 1>;
                };
 
                serial2: serial@54006a00 {
@@ -141,6 +151,7 @@
                        pinctrl-0 = <&pinctrl_uart2>;
                        clocks = <&peri_clk 2>;
                        clock-frequency = <58820000>;
+                       resets = <&peri_rst 2>;
                };
 
                serial3: serial@54006b00 {
@@ -152,6 +163,7 @@
                        pinctrl-0 = <&pinctrl_uart3>;
                        clocks = <&peri_clk 3>;
                        clock-frequency = <58820000>;
+                       resets = <&peri_rst 3>;
                };
 
                gpio: gpio@55000000 {
@@ -175,6 +187,19 @@
                                                  "gpio_range4",
                                                  "gpio_range5";
                        ngpios = <200>;
+                       socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+                                                    <21 217 3>;
+               };
+
+               adamv@57920000 {
+                       compatible = "socionext,uniphier-ld11-adamv",
+                                    "simple-mfd", "syscon";
+                       reg = <0x57920000 0x1000>;
+
+                       adamv_rst: reset {
+                               compatible = "socionext,uniphier-ld11-adamv-reset";
+                               #reset-cells = <1>;
+                       };
                };
 
                i2c0: i2c@58780000 {
@@ -187,6 +212,7 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_i2c0>;
                        clocks = <&peri_clk 4>;
+                       resets = <&peri_rst 4>;
                        clock-frequency = <100000>;
                };
 
@@ -200,6 +226,7 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_i2c1>;
                        clocks = <&peri_clk 5>;
+                       resets = <&peri_rst 5>;
                        clock-frequency = <100000>;
                };
 
@@ -210,6 +237,7 @@
                        #size-cells = <0>;
                        interrupts = <0 43 4>;
                        clocks = <&peri_clk 6>;
+                       resets = <&peri_rst 6>;
                        clock-frequency = <400000>;
                };
 
@@ -223,6 +251,7 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_i2c3>;
                        clocks = <&peri_clk 7>;
+                       resets = <&peri_rst 7>;
                        clock-frequency = <100000>;
                };
 
@@ -236,6 +265,7 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_i2c4>;
                        clocks = <&peri_clk 8>;
+                       resets = <&peri_rst 8>;
                        clock-frequency = <100000>;
                };
 
@@ -246,6 +276,7 @@
                        #size-cells = <0>;
                        interrupts = <0 25 4>;
                        clocks = <&peri_clk 9>;
+                       resets = <&peri_rst 9>;
                        clock-frequency = <400000>;
                };
 
@@ -298,9 +329,11 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_emmc_1v8>;
                        clocks = <&sys_clk 4>;
+                       resets = <&sys_rst 4>;
                        bus-width = <8>;
                        mmc-ddr-1_8v;
                        mmc-hs200-1_8v;
+                       mmc-pwrseq = <&emmc_pwrseq>;
                        cdns,phy-input-delay-legacy = <4>;
                        cdns,phy-input-delay-mmc-highspeed = <2>;
                        cdns,phy-input-delay-mmc-ddr = <3>;
@@ -315,7 +348,8 @@
                        interrupts = <0 243 4>;
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_usb0>;
-                       clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+                       clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+                                <&mio_clk 12>;
                        resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
                                 <&mio_rst 12>;
                };
@@ -327,7 +361,8 @@
                        interrupts = <0 244 4>;
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_usb1>;
-                       clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+                       clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+                                <&mio_clk 13>;
                        resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
                                 <&mio_rst 13>;
                };
@@ -339,7 +374,8 @@
                        interrupts = <0 245 4>;
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_usb2>;
-                       clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+                       clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+                                <&mio_clk 14>;
                        resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
                                 <&mio_rst 14>;
                };
@@ -371,6 +407,24 @@
                        };
                };
 
+               soc-glue@5f900000 {
+                       compatible = "socionext,uniphier-ld11-soc-glue-debug",
+                                    "simple-mfd";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0x5f900000 0x2000>;
+
+                       efuse@100 {
+                               compatible = "socionext,uniphier-efuse";
+                               reg = <0x100 0x28>;
+                       };
+
+                       efuse@200 {
+                               compatible = "socionext,uniphier-efuse";
+                               reg = <0x200 0x68>;
+                       };
+               };
+
                aidet: aidet@5fc20000 {
                        compatible = "socionext,uniphier-ld11-aidet";
                        reg = <0x5fc20000 0x200>;
@@ -416,6 +470,7 @@
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_nand>;
                        clocks = <&sys_clk 2>;
+                       resets = <&sys_rst 2>;
                };
        };
 };